About this Journal Submit a Manuscript Table of Contents
Advances in Mechanical Engineering
Volume 2013 (2013), Article ID 407964, 7 pages
http://dx.doi.org/10.1155/2013/407964
Research Article

Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering

Friedrich-Alexander-Universität Erlangen-Nürnberg, Institute of Polymer Technology, Am Weichselgarten 9, 91054 Erlangen-Tennenlohe, Germany

Received 23 May 2013; Revised 2 September 2013; Accepted 3 September 2013

Academic Editor: Gang Wang

Copyright © 2013 Steve Meister and Dietmar Drummer. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Steve Meister and Dietmar Drummer, “Affecting the Ageing Behaviour of Injection-Moulded Microparts Using Variothermal Mould Tempering,” Advances in Mechanical Engineering, vol. 2013, Article ID 407964, 7 pages, 2013. doi:10.1155/2013/407964