About this Journal Submit a Manuscript Table of Contents
Advances in Mechanical Engineering
Volume 2013 (2013), Article ID 978418, 9 pages
http://dx.doi.org/10.1155/2013/978418
Research Article

Teaching Planetary Gear Trains with the Aid of Nomographs

College of Engineering, University of Al-Qadisiyah, Al Diwaniyah, Iraq

Received 28 April 2012; Accepted 22 November 2012

Academic Editor: Seung Bok Choi

Copyright © 2013 Essam Lauibi Esmail. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. L. W. Tsai, Mechanism Design: Enumeration of Kinematic Structures according to Function, CRC Press, Boca Raton, Fla, USA, 2001.
  2. H. I. Hsieh and L. W. Tsai, “Kinematic analysis of epicyclic-type transmission mechanisms using the concept of fundamental geared entities,” ASME Journal of Mechanical Design, vol. 118, no. 2, pp. 294–299, 1996. View at Scopus
  3. J. H. Glover, “Planetary gear systems,” in Product Engineering, pp. 72–79, 1965.
  4. Z. Levai, Theory of epicyclic gears and epicyclic change-speed gears [Ph.D. thesis], Technical University of Building, Civil and Transport Engineering, Budapest, Hungary, 1964.
  5. Z. Lévai, “Structure and analysis of planetary gear trains,” Journal of Mechanisms, vol. 3, no. 3, pp. 131–148, 1968. View at Scopus
  6. W. H. Wilkinson, “Four ways to calculate planetary gear trains,” Machine Design, pp. 155–159, 1960.
  7. R. R. Allen, “Multi-port models of the kinematic and dynamic analysis of gear power transmission,” ASME Journal of Mechanical Design, vol. 101, no. 2, pp. 258–392, 1979.
  8. D. Gibson and S. Kramer, “Symbolic notation and kinematic equations of motion of the twenty-two basic spur planetary gear trains,” Journal of Mechanisms, Transmissions, and Automation in Design, vol. 106, no. 3, pp. 333–340, 1984. View at Scopus
  9. R. J. J. Willis, “On the kinematics of the closed epicyclic differential gears,” ASME Journal of Mechanical Design, vol. 104, no. 4, pp. 712–723, 1982. View at Scopus
  10. C. A. Corey, Epicyclic gear train solution technique with application to tandem bicycling [M.S. thesis], Department of Mechanical Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Va, USA, 2003.
  11. Toyota Motor Corporation, http://www.autoshop101.com/forms/Hybrid02.pdf.
  12. E. L. Esmail, “Kinematic nomographs of epicyclic-type transmission mechanisms,” Emirates Journal for Engineering Research, vol. 12, no. 3, pp. 47–55, 2007.
  13. F. Freudenstein and A. T. Yang, “Kinematics and statics of a coupled epicyclic spur-gear train,” Mechanism and Machine Theory, vol. 7, no. 2, pp. 263–275, 1972. View at Scopus
  14. E. Pennestri and F. Freudenstein, “Systematic approach to power flow and static-force analysis in epicyclic spur-gear trains,” ASME Journal of Mechanical Design, vol. 115, no. 3, pp. 639–644, 1993. View at Scopus
  15. H. I. Hsieh, Enumeration and selection of clutching sequences associated with epicyclic-type transmission mechanisms [Ph.D. thesis], Department of Mechanical Engineering, University of Maryland, College Park, Md, USA.
  16. F. Buchsbaum and F. Freudenstein, “Synthesis of kinematic structure of geared kinematic chains and other mechanisms,” Journal of Mechanisms, vol. 5, no. 3, pp. 357–392, 1970. View at Scopus
  17. G. Chatterjee and L. W. Tsai, “Enumeration of epicyclic-type transmission gear trains,” Transactions of SAE, vol. 103, no. 6, pp. 1415–1426, 1995, Paper no. 941012.
  18. G. Chatterjee and L. W. Tsai, “Computer-aided sketching of epicyclic-type automatic transmission gear trains,” ASME Journal of Mechanical Design, vol. 118, no. 3, pp. 405–411, 1996. View at Scopus
  19. M. Hylander, “On synthesis in epicyclic transmission design,” Machine and Vehicle Design, Chalmers University of Technology, Goteborg, Sweden, Report No. 1993-02-26, 1993.
  20. R. Ravisankar and T. S. Mruthyunjaya, “Computerized synthesis of the structure of geared kinematic chains,” Mechanism and Machine Theory, vol. 20, no. 5, pp. 367–387, 1985. View at Scopus
  21. L. W. Tsai and C. C. Lin, “Creation of nonfractionated, two-degree-of-freedom epicyclic gear trains,” Journal of Mechanisms, Transmissions, and Automation in Design, vol. 111, no. 4, pp. 524–529, 1989. View at Scopus
  22. H. L. Benford and M. B. Leising, “The lever analogy: a new tool in transmission analysis,” SAE paper 810102, 1981.
  23. H. I. Hsieh and L. W. Tsai, “The selection of a most efficient clutching sequence associated with automatic transmission mechanisms,” ASME Journal of Mechanical Design, vol. 120, no. 4, pp. 514–519, 1998. View at Scopus
  24. E. Pennestri and F. Freudenstein, “Mechanical efficiency of epicyclic gear trains,” ASME Journal of Mechanical Design, vol. 115, no. 3, pp. 645–651, 1993. View at Scopus
  25. J. M. Del Castillo, “The analytical expression of the efficiency of planetary gear trains,” Mechanism and Machine Theory, vol. 37, no. 2, pp. 197–214, 2002. View at Publisher · View at Google Scholar · View at Scopus
  26. E. Pennestrì and P. P. Valentini, “A review of formulas for the mechanical efficiency analysis of two degrees-of-freedom epicyclic gear trains,” Drive System Technique, vol. 18, no. 1, pp. 34–40, 2004.
  27. E. L. Esmail, “Nomographs for enumeration of clutching sequences associated with epicyclic-type automatic transmission mechanisms,” in Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE '08), pp. 165–174, Boston, Mass, USA, October-November 2008, Paper no. 66409. View at Scopus
  28. F. Freudenstein and L. Dobrjansky, “On a theory for the type synthesis of mechanisms,” in Proceedings of the 11th International Congress of Applied Mechanics, pp. 420–428, 1964.
  29. L. Dobrjansky and F. Freudenstein, “Some application of graph theory to the structural analysis of mechanisms,” ASME Journal of Engineering for Industry, vol. 89, pp. 153–158, 1967.