About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [573 citations: 1–100 of 477 articles]

Articles published in Advances in Mechanical Engineering have been cited 573 times. The following is a list of the 477 articles that have cited the articles published in Advances in Mechanical Engineering.

  • Xiao-Jun Yang, Jordan Hristov, H. M. Srivastava, and Bashir Ahmad, “Modelling Fractal Waves on Shallow Water Surfaces via Local Fractional Korteweg-de Vries Equation,” Abstract and Applied Analysis, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Long-Fei Wang, Xiao-Jun Yang, Dumitru Baleanu, Carlo Cattani, and Yang Zhao, “Fractal Dynamical Model of Vehicular Traffic Flow within the Local Fractional Conservation Laws,” Abstract and Applied Analysis, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • Yu Zhang, “Solving Initial-Boundary Value Problems for Local Fractional Differential Equation by Local Fractional Fourier Series Method,” Abstract and Applied Analysis, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • Feng Yang, Qing-wang Song, Lei Wang, Shan Zuo, and Sheng-shan Li, “Wind and Wave Disturbances Compensation to Floating Offshore Wind Turbine Using Improved Individual Pitch Control Based on Fuzzy Control Strategy,” Abstract and Applied Analysis, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Alexandros Askounis, Khellil Sefiane, Vasileios Koutsos, and Martin E.R. Shanahan, “Effect of particle geometry on triple line motion of nano-fluid drops and deposit nano-structuring,” Advances in Colloid and Interface Science, 2014. View at Publisher · View at Google Scholar
  • A. R. Ravikumar, K. S. Amirthagadeswaran, and P. Senthil, “Parametric Optimization of Squeeze Cast AC2A-Ni Coated Composite Using Taguchi Technique,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Xiaocong He, and Yuqi Wang, “An Analytical Model for Predicting the Stress Distributions within Single-Lap Adhesively Bonded Beams,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • Dietmar Drummer, Andreas Seefried, and Steve Meister, “Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods,” Advances in Materials Science and Engineering, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Tao Xu, Hang Xiu, Junlou Li, Haichao Ge, Qing Shao, Guang Yang, and Zhenglei Yu, “Simulation of Impinging Cooling Performance with Pin Fins and Mist Cooling Adopted in a Simplified Gas Turbine Transition Piece,” Advances in Mathematical Physics, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Gong-Nan Xie, Dumitru Baleanu, Xiao-Jun Yang, Kai Zhao, Yang-Yang Li, and Yang Zhao, “Local Fractional Poisson and Laplace Equations with Applications to Electrostatics in Fractal Domain,” Advances in Mathematical Physics, vol. 2014, pp. 1–5, 2014. View at Publisher · View at Google Scholar
  • Behrouz Takabi, and Saeed Salehi, “Augmentation of the Heat Transfer Performance of a Sinusoidal Corrugated Enclosure by Employing Hybrid Nanofluid,” Advances in Mechanical Engineering, vol. 2014, pp. 1–16, 2014. View at Publisher · View at Google Scholar
  • Ji Pei, Wenjie Wang, Shouqi Yuan, and Jieyun Mao, “Numerical Investigation of Periodically Unsteady Pressure Field in a High Power Centrifugal Diffuser Pump,” Advances in Mechanical Engineering, vol. 2014, pp. 1–14, 2014. View at Publisher · View at Google Scholar
  • Fu-de Lu, and De Gao, “Impact Responses of Composite Cushioning System considering Critical Component with Simply Supported Beam Type,” Advances in Mechanical Engineering, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Weiguo Gu, Dezhong Wang, and Yasuo Kawaguchi, “Study on the Drag Reducing Channel Fluids by Experiments and DNS Using Giesekus Model,” Advances in Mechanical Engineering, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Jianrui Liu, and Dengpeng Fu, “The Unsteady Numerical Simulation and Fluid-Structure Interaction Analysis of TLB600-700 Desulphurization Pump,” Advances in Mechanical Engineering, 2014. View at Publisher · View at Google Scholar
  • Ahmed M. Abdelrhman, Lim Meng Hee, M. S. Leong, and Salah Al-Obaidi, “Condition Monitoring of Blade in Turbomachinery: A Review,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Ali Hadidi, Bahman Farahmand Azar, and Hossein Zonouzi Marand, “Second-Order Nonlinear Analysis of Steel Tapered Beams Subjected to Span Loading,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Yimei Kang, and Wang Pan, “A Novel Approach of Low-Light Image Denoising for Face Recognition,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Yingfeng Zhang, Wenbo Wang, Sichao Liu, and Gongnan Xie, “Real-Time Shop-Floor Production Performance Analysis Method for the Internet of Manufacturing Things,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Yi Gong, and Jilin Cheng, “Combinatorial Optimization Method for Operation of Pumping Station with Adjustable Blade and Variable Speed Based on Experimental Optimization of Subsystem,” Advances in Mechanical Engineering, vol. 2014, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  • Li Qin, Fucai Liu, and Lihuan Liang, “The Application of Adaptive Backstepping Sliding Mode for Hybrid Humanoid Robot Arm Trajectory Tracking Control,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • G. R. Wang, S. Y. Tao, Q. Y. Liu, Y. K. Fu, H. Zhu, and F. Chu, “Experimental Validation on a New Valve Core of the Throttle Valve in Managed Pressure Drilling,” Advances in Mechanical Engineering, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Qingzhen Zhang, Zhenbo Wang, Fei Tao, Bhaba R. Sarker, and Lin Cheng, “Design of Optimal Attack-Angle for RLV Reentry Based on Quantum Particle Swarm Optimization,” Advances in Mechanical Engineering, vol. 2014, pp. 1–16, 2014. View at Publisher · View at Google Scholar
  • Weidong Shi, Chuan Wang, Wei Wang, and Bing Pei, “Numerical Calculation on Cavitation Pressure Pulsation in Centrifugal Pump,” Advances in Mechanical Engineering, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Mohamed A. Omar, “Chain Drive Simulation Using Spatial Multibody Dynamics,” Advances in Mechanical Engineering, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • M. Alipanah, A. A. Ranjbar, and A. Zahmatkesh, “Numerical Study of Natural Convection in Vertical Enclosures Utilizing Nanofluid,” Advances in Mechanical Engineering, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • Mingjun Pang, and Jinjia Wei, “A Mechanism on Liquid-Phase Turbulence Modulation by Microbubbles,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Yu Zhang, Jinglai Wu, Yunqing Zhang, and Liping Chen, “Design Optimization of Centrifugal Pump Using Radial Basis Function Metamodels,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • S. Jengsooksawat, S. Rittidech, and K. Booddachan, “Loop Thermosyphon with Vapour Chamber: A Thermodynamic Study,” Advances in Mechanical Engineering, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Amin Noor, Roslinda Nazar, Khamisah Jafar, and Ioan Pop, “Boundary-Layer Flow and Heat Transfer of Nanofluids over a Permeable Moving Surface in the Presence of a Coflowing Fluid,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Ying-bin Liang, Li-xun Zhang, Er-xiao Li, Xiao-hong Liu, and Yong Yang, “Design Considerations of Rotor Configuration for Straight-Bladed Vertical Axis Wind Turbines,” Advances in Mechanical Engineering, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • Shoufeng Tang, Minming Tong, and Xinmin He, “The Optimum Wavelet Base of Wavelet Analysis in Coal Rock Microseismic Signals,” Advances in Mechanical Engineering, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Hao Lu, Yonghui He, and Yimin Zhang, “Reliability-Based Robust Design of Mechanical Components with Correlated Failure Modes Based on Moment Method,” Advances in Mechanical Engineering, vol. 2014, pp. 1–17, 2014. View at Publisher · View at Google Scholar
  • Peng Cheng, Guofeng Yao, Wei Chen, Bin Li, Junlou Li, Tao Xu, Zhenglei Yu, and Long Ma, “Computational Study of Air/Mist Impinging Jets Cooling Effectiveness under Various Curvature Models,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Fannian Meng, Quanlin Dong, Pengfei Wang, and Yan Wang, “Multiobjective Optimization for the Impeller of Centrifugal Fan Based on Response Surface Methodology with Grey Relational Analysis Method,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Lisheng Jin, Huacai Xian, Yuying Jiang, Qingning Niu, Meijiao Xu, and Dongmei Yang, “Research on Evaluation Model for Secondary Task Driving Safety Based on Driver Eye Movements,” Advances in Mechanical Engineering, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Kittipong Boonlong, “Vibration-Based Damage Detection in Beams by Cooperative Coevolutionary Genetic Algorithm,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Mingjun Pang, Jinjia Wei, and Bo Yu, “Study on Liquid Turbulence Modulation by Microbubbles in Different Turbulence Layers,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Yang Sun, Guangming Xiong, Weilong Song, Jianwei Gong, and Huiyan Chen, “Test and Evaluation of Autonomous Ground Vehicles,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Francesco Marotti de Sciarra, “Mixed Variational Principles in Nondissipative Coupled Thermoelasticity,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Nitin V. Satpute, Shankar Singh, and S. M. Sawant, “Energy Harvesting Shock Absorber with Electromagnetic and Fluid Damping,” Advances in Mechanical Engineering, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • Daniel Garcia-Pozuelo, Antonio Gauchia, Ester Olmeda, and Vicente Diaz, “Bump Modeling and Vehicle Vertical Dynamics Prediction,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Dmitrii O. Glushkov, Genii V. Kuznetsov, and Pavel A. Strizhak, “Research of Macroscopic Regularities of Heat and Mass Transfer at the Ignition Condition of a Liquid High-Energy Material by an Immersed Source with a Limited Energy Capacity,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Yunfei Yan, Li Zhang, WenLi Pan, and Ge Pu, “Experimental Investigation of Atomizing Performance of Low Pressure Swirl Nozzle,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Wen-Tao Su, Xiao-Bin Li, Feng-Chen Li, Xian-Zhu Wei, Jin-Tao Liu, and Yu-Lin Wu, “On the Flow Instabilities and Turbulent Kinetic Energy of Large-Scale Francis Hydroturbine Model at Low Flow Rate Conditions,” Advances in Mechanical Engineering, vol. 2014, pp. 1–16, 2014. View at Publisher · View at Google Scholar
  • Bendong Liu, Fangzhou Zhang, Desheng Li, and Jiahui Yang, “Research on the Influence of Excitation Frequency on the Sensitivity in Metal Debris Detection with Inductor Sensor,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Jianzhong Zhou, Jian Xiao, Han Xiao, Weibo Zhang, Wenlong Zhu, and Chaoshun Li, “Multifault Diagnosis for Rolling Element Bearings Based on Intrinsic Mode Permutation Entropy and Ensemble Optimal Extreme Learning Machine,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Seung-Hun Lee, Chan-Joo Lee, Kyung-Hun Lee, Jung-Min Lee, Byung-Min Kim, and Dae-Cheol Ko, “Influence of Tool Shape on Hole Clinching for Carbon Fiber-Reinforced Plastic and SPRC440,” Advances in Mechanical Engineering, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • Zhi-geng Fan, and Li-xin Lu, “Effect of Fatigue Damage on Inner-Resonance Conditions of Precompressed Honeycomb Paperboard System,” Advances in Mechanical Engineering, vol. 2014, pp. 1–4, 2014. View at Publisher · View at Google Scholar
  • Takahiro Tsukahara, Masaaki Tanabe, and Yasuo Kawaguchi, “Effect of Fluid Viscoelasticity on Turbulence and Large-Scale Vortices behind Wall-Mounted Plates,” Advances in Mechanical Engineering, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • Han Zhang, Xuexun Guo, Lin Xu, Sanbao Hu, and Zhigang Fang, “Parameters Analysis of Hydraulic-Electrical Energy Regenerative Absorber on Suspension Performance,” Advances in Mechanical Engineering, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • Chunxiang Wang, Hengrun Zhang, Ming Yang, Xudong Wang, Lei Ye, and Chunzhao Guo, “Automatic Parking Based on a Bird’s Eye View Vision System,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Fan Zhang, Shouqi Yuan, Qiang Fu, Feng Hong, and Jianping Yuan, “Investigation of Transient Flow in a Centrifugal Charging Pump during Charging Operating Process,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Pavel Tomšič, and Jože Duhovnik, “Simultaneous Topology and Size Optimization of 2D and 3D Trusses Using Evolutionary Structural Optimization with regard to Commonly Used Topologies,” Advances in Mechanical Engineering, vol. 2014, pp. 1–13, 2014. View at Publisher · View at Google Scholar
  • Houguang Liu, Shirong Ge, Gang Cheng, Jianhua Yang, Zhushi Rao, and Xinsheng Huang, “Transducer Type and Design Influence on the Hearing Loss Compensation Behaviour of the Electromagnetic Middle Ear Implant in a Finite Element Analysis,” Advances in Mechanical Engineering, vol. 2014, pp. 1–11, 2014. View at Publisher · View at Google Scholar
  • A. B. Abdullah, S. M. Sapuan, and Z. Samad, “Profile Measurement Based on Focus Variation Method for Geometrical Defect Evaluation: A Case Study of Cold Forged Propeller Blade,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Panagiota Fokianou, Maria Samarakou, Dionisis Kandris, and Emmanouil D. Fylladitakis, “Star-Delta Switches Evaluation for Use in Grid-Connected Wind Farm Installations,” Advances in Mechanical Engineering, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • Peng Wang, Jixiang Li, and Yuan Zhang, “The Nonfragile Controller with Covariance Constraint for Stable Motion of Quadruped Search-Rescue Robot,” Advances in Mechanical Engineering, vol. 2014, pp. 1–10, 2014. View at Publisher · View at Google Scholar
  • Qiaorui Si, Jianping Yuan, Shouqi Yuan, Wenjie Wang, Lei Zhu, and Gérard Bois, “Numerical Investigation of Pressure Fluctuation in Centrifugal Pump Volute Based on SAS Model and Experimental Validation,” Advances in Mechanical Engineering, vol. 2014, pp. 1–12, 2014. View at Publisher · View at Google Scholar
  • E. Ruiz, V.R. Ferro, J. de Riva, D. Moreno, and J. Palomar, “Evaluation of ionic liquids as absorbents for ammonia absorption refrigeration cycles using COSMO-based process simulations,” Applied Energy, vol. 123, pp. 281–291, 2014. View at Publisher · View at Google Scholar
  • Peng Gao, Shaoze Yan, and Liyang Xie, “Dynamic fuzzy reliability models of degraded hold-down structures for folded solar array,” Applied Mathematical Modelling, 2014. View at Publisher · View at Google Scholar
  • Bin Zi, Jianbin Cao, Huabing Zhu, and Huihui Sun, “Comparative study of cable parallel manipulators with and without hybrid-driven planar five-bar mechanism,” Applied Mathematical Modelling, 2014. View at Publisher · View at Google Scholar
  • A. Heshmati, H.A. Mohammed, and A.N. Darus, “Mixed convection heat transfer of nanofluids over backward facing step having a slotted baffle,” Applied Mathematics and Computation, vol. 240, pp. 368–386, 2014. View at Publisher · View at Google Scholar
  • Dalibor Petković, Shahaboddin Shamshirband, Javed Iqbal, Nor Badrul Anuar, Nenad D. Pavlović, and Miss Laiha Mat Kiah, “Adaptive neuro-fuzzy prediction of grasping object weight for passively compliant gripper,” Applied Soft Computing, 2014. View at Publisher · View at Google Scholar
  • Yu Xu, and Xiande Fang, “Assessment of "comments on 'correlations of void fraction for two-phase refrigerant flow in pipes'",” Applied Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • M.M. Awad, “Comments on “Correlations of void fraction for two-phase refrigerant flow in pipes”,” Applied Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • Jifen Wang, Huaqing Xie, Zhixiong Guo, Lihui Guan, and Yang Li, “Improved thermal properties of paraffin wax by the addition of TiO2 nanoparticles,” Applied Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • Raquel H. Vaz, José M.C. Pereira, Ana R. Ervilha, and José C.F. Pereira, “Simulation and Uncertainty Quantification in High Temperature Microwave Heating,” Applied Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • T. Moreno, N. Pérez, C. Reche, V. Martins, E. de Miguel, M. Capdevila, S. Centelles, M.C. Minguillón, F. Amato, A. Alastuey, X. Querol, and W. Gibbons, “Subway platform air quality: assessing the influences of tunnel ventilation, train piston effect and station design,” Atmospheric Environment, 2014. View at Publisher · View at Google Scholar
  • M.K.H. Abdolbaqi, C.S.N. Azwadi, and R. Mamat, “Heat Transfer Augmentation in the Straight Channel by Using Nanofluids,” Case Studies in Thermal Engineering, 2014. View at Publisher · View at Google Scholar
  • P. Hajiani, and F. Larachi, “Magnetic-field assisted mixing of liquids using magnetic nanoparticles,” Chemical Engineering and Processing: Process Intensification, 2014. View at Publisher · View at Google Scholar
  • Mehdi Bahiraei, Seyed Mostafa Hosseinalipour, and Mahdi Saeedan, “ Prediction of Nusselt Number and Friction Factor of Water-Al 2 O 3 Nanofluid Flow in Shell-and-Tube Heat Exchanger with Helical Baffles ,” Chemical Engineering Communications, pp. 140604080336002, 2014. View at Publisher · View at Google Scholar
  • Akram Ghanem, Charbel Habchi, Thierry Lemenand, Dominique Della Valle, and Hassan Peerhossaini, “Mixing Performances of Swirl Flow and Corrugated Channel Reactors,” Chemical Engineering Research and Design, 2014. View at Publisher · View at Google Scholar
  • A. Abubakar, T. Al-Wahaibi, Y. Al-Wahaibi, A.R. Al-Hashmi, and A. Al-Ajmi, “Roles of drag reducing polymers in single- and multi-phase flows,” Chemical Engineering Research and Design, 2014. View at Publisher · View at Google Scholar
  • Liping Wei, Youjun Lu, and Jinjia Wei, “Flow Separation from a Spherical Particle in Supercritical Water,” Chemical Engineering Research and Design, 2014. View at Publisher · View at Google Scholar
  • Galal Ismail, and Rania Fathy, “Hydromagnetic flow of a Cu-water nanofluid past a moving wedge with viscous dissipation,” Chinese Physics B, vol. 23, no. 4, 2014. View at Publisher · View at Google Scholar
  • Sam Vasilevsky, Gilbert Greub, and Denise Nardelli-Haefliger, “Genital Chlamydia trachomatis: Understanding the Roles of Innate and Adapti ve Immunity in Vaccine Research,” Clinical Microbiology Reviews, vol. 27, no. 2, pp. 346–370, 2014. View at Publisher · View at Google Scholar
  • Dongdong Wang, and Pengjie Chen, “Quasi-convex reproducing kernel meshfree method,” Computational Mechanics, 2014. View at Publisher · View at Google Scholar
  • Ilya Valuev, and Sergey Belousov, “Implementation of the iterative finite-difference time-domain technique for simulation of periodic structures at oblique incidence,” Computer Physics Communications, vol. 185, no. 4, pp. 1273–1281, 2014. View at Publisher · View at Google Scholar
  • Mehrdad Khamooshi, Kiyan Parham, Fuat Egelioglu, Mortaza Yari, and Hana Salati, “Simulation and optimization of novel configurations of triple absorption heat transformers integrated to a water desalination system,” Desalination, vol. 348, pp. 39–48, 2014. View at Publisher · View at Google Scholar
  • Sheng Hong, Zheng Zhou, Enrico Zio, and Kan Hong, “Condition assessment for the performance degradation of bearing based on a combinatorial feature extraction method,” Digital Signal Processing, 2014. View at Publisher · View at Google Scholar
  • Qinmu Xie, Shoufeng Ma, Ning Jia, and Yang Gao, “Agent-Based Modeling and Simulation for the Bus-Corridor Problem in a Many-to-One Mass Transit System,” Discrete Dynamics in Nature and Society, vol. 2014, pp. 1–16, 2014. View at Publisher · View at Google Scholar
  • Xiangdong Liu, and Yongping Chen, “Fluid flow and heat transfer in flat-plate oscillating heat pipe,” Energy and Buildings, 2014. View at Publisher · View at Google Scholar
  • V. Costanzo, G. Evola, L. Marletta, and A. Gagliano, “Proper evaluation of the external convective heat transfer for the thermal analysis of cool roofs,” Energy and Buildings, 2014. View at Publisher · View at Google Scholar
  • I. Hernández-Pérez, G. Álvarez, J. Xamán, I. Zavala-Guillén, J. Arce, and E. Simá, “Thermal performance of reflective materials applied to exterior building components–A review,” Energy and Buildings, 2014. View at Publisher · View at Google Scholar
  • Wei Wu, Baolong Wang, Wenxing Shi, and Xianting Li, “Techno-economic Analysis of Air Source Absorption Heat Pump: Improving Economy from a Design Perspective,” Energy and Buildings, 2014. View at Publisher · View at Google Scholar
  • Vincenzo Bianco, Oronzio Manca, and Sergio Nardini, “Entropy generation analysis of turbulent convection flow of Al2O3–water nanofluid in a circular tube subjected to constant wall heat flux,” Energy Conversion and Management, vol. 77, pp. 306–314, 2014. View at Publisher · View at Google Scholar
  • Tabish Alam, R.P. Saini, and J.S. Saini, “Experimental investigation on heat transfer enhancement due to V-shaped perforated blocks in a rectangular duct of solar air heater,” Energy Conversion and Management, vol. 81, pp. 374–383, 2014. View at Publisher · View at Google Scholar
  • Mohamed A. Habib, Esmail M.A. Mokheimer, Sofihullahi Y. Sanusi, and Medhat A. Nemitallah, “Numerical investigations of combustion and emissions of syngas as compared to methane in a 200MW package boiler,” Energy Conversion and Management, vol. 83, pp. 296–305, 2014. View at Publisher · View at Google Scholar
  • Tabish Alam, R.P. Saini, and J.S. Saini, “Effect of circularity of perforation holes in V-shaped blockages on heat transfer and friction characteristics of rectangular solar air heater duct,” Energy Conversion and Management, vol. 86, pp. 952–963, 2014. View at Publisher · View at Google Scholar
  • Giorgio Olmigi, “An experimental investigation on a crack propagating from a geartrain housing in an asphalt milling machine,” Engineering Failure Analysis, 2014. View at Publisher · View at Google Scholar
  • Gabriel Fedorko, Vieroslav Molnar, Anna Grincova, Miroslav Dovica, Teodor Toth, Nikoleta Husakova, Vladimir Taraba, and Michal Kelemen, “Failure analysis of irreversible changes in the construction of rubber-textile conveyor belt damaged by sharp-edge material impact,” Engineering Failure Analysis, 2014. View at Publisher · View at Google Scholar
  • Hang Xu, and Ioan Pop, “Fully developed mixed convection flow in a horizontal channel filled by a nanofluid containing both nanoparticles and gyrotactic microorganisms,” European Journal of Mechanics - B/Fluids, 2014. View at Publisher · View at Google Scholar
  • B. Mehrjou, S. Zeinali Heris, and K. Mohamadifard, “Experimental study of CuO/water nanofluid turbulent convective heat transfer in square cross-section duct,” Experimental Heat Transfer, pp. 140423103241007, 2014. View at Publisher · View at Google Scholar
  • Janusz T. Cieśliński, and Katarzyna A. Krygier, “Sessile droplet contact angle of water-Al2O3, water-TiO2 and water-Cu nanofluids,” Experimental Thermal and Fluid Science, 2014. View at Publisher · View at Google Scholar
  • Rakhi N. Mehta, and Parimal A. Parikh, “Nanofuels: Combustion, engine performance and emissions,” Fuel, vol. 120, pp. 91–97, 2014. View at Publisher · View at Google Scholar
  • V. Arul Mozhi Selvan, R.B. Anand, and M. Udayakumar, “Effect of Cerium Oxide Nanoparticles and Carbon Nanotubes as fuel-borne additives in Diesterol blends on the performance, combustion and emission characteristics of a variable compression ratio engine,” Fuel, 2014. View at Publisher · View at Google Scholar
  • M. Kahani, S. Zeinali Heris, and S. M. Mousavi, “Experimental investigation of TiO2/water nanofluid laminar forced convective heat transfer through helical coiled tube,” Heat and Mass Transfer, 2014. View at Publisher · View at Google Scholar
  • Adnan M. Hussein, R. A. Bakar, K. Kadirgama, and K. V. Sharma, “Heat transfer augmentation of a car radiator using nanofluids,” Heat and Mass Transfer, 2014. View at Publisher · View at Google Scholar
  • M. Alipanah, A.A. Ranjbar, E. Farnad, and F. Alipanah, “ Entropy Generation of Natural Convection Heat Transfer in a Square Cavity Using Al 2 O 3 -Water Nanofluid ,” Heat Transfer-Asian Research, 2014. View at Publisher · View at Google Scholar