Research Letters in Materials Science
Volume 2008 (2008), Article ID 186427, 4 pages
doi:10.1155/2008/186427
Research Letter

Calibrated Pulse-Thermography Procedure for Inspecting HDPE

Mohammed A. Omar,1 Yi Zhou,2 Rohit Parvataneni,2 and Eric Planting2

1International Center for Automotive Research (CU-ICAR), Clemson University, 340 Campbell Jr. Graduate Engineering Center (CGEC), Greenville, SC 29607, USA
2Department of Mechanical Engineering, Clemson University, Clemson, SC 29634, USA

Received 11 September 2008; Accepted 2 December 2008

Academic Editor: Rui Vilar

Copyright © 2008 Mohammed A. Omar et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Mohammed A. Omar, Yi Zhou, Rohit Parvataneni, and Eric Planting, “Calibrated Pulse-Thermography Procedure for Inspecting HDPE,” Research Letters in Materials Science, vol. 2008, Article ID 186427, 4 pages, 2008. doi:10.1155/2008/186427