Copyright © 2008 Katsuyoshi Kondoh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

1. T. Masumoto and R. Maddin, “The mechanical properties of palladium 20 a/o silicon alloy quenched from the liquid state,” Acta Metallurgica, vol. 19, no. 7, pp. 725–741, 1971. View at Publisher · View at Google Scholar
2. R. Maddin and T. Masumoto, “The deformation of amorphous palladium-20 at.% silicon,” Materials Science and Engineering, vol. 9, pp. 153–162, 1972. View at Publisher · View at Google Scholar
3. C. A. Pampillo, “Flow and fracture in amorphous alloys,” Journal of Materials Science, vol. 10, no. 7, pp. 1194–1227, 1975. View at Publisher · View at Google Scholar
4. H. S. Chen and D. E. Polk, “Mechanical properties of Ni-Fe based alloy glasses,” Journal of Non-Crystalline Solids, vol. 15, pp. 174–178, 1979.
5. U. Koster, J. Meinhardt, S. Roos, and H. Liebertz, “Formation of quasicrystals in bulk glass forming Zr-Cu-Ni-Al alloys,” Applied Physics Letters, vol. 69, no. 2, pp. 179–181, 1996. View at Publisher · View at Google Scholar
6. Y. Kawamura, H. Kato, A. Inoue, and T. Masumoto, “Full strength compacts by extrusion of glassy metal powder at the supercooled liquid state,” Applied Physics Letters, vol. 67, no. 14, pp. 2008–2010, 1995. View at Publisher · View at Google Scholar
7. Y. Kawamura, T. Shibata, A. Inoue, and T. Masumoto, “Superplastic deformation of ${\text{Zr}}_{65}{\text{Al}}_{10}{\text{Ni}}_{10}{\text{Cu}}_{15}$ metallic glass,” Scripta Materialia, vol. 37, no. 4, pp. 431–436, 1997. View at Publisher · View at Google Scholar
8. V. Schroeder, C. J. Gilbert, and R. O. Ritchie, “Comparison of the corrosion behavior of a bulk amorphous metal, ${\text{Zr}}_{41.2}{\text{Ti}}_{13.8}{\text{Cu}}_{12.5}{\text{Ni}}_{10}{\text{Be}}_{22.5}$, with its crystallized form,” Scripta Materialia, vol. 38, no. 10, pp. 1481–1485, 1998. View at Publisher · View at Google Scholar
9. A. Inoue, T. Zhang, and T. Masumoto, “Production of amorphous cylinder and sheet of ${\text{La}}_{55}{\text{Al}}_{25}{\text{Ni}}_{20}$ alloy by a metallic mold casting method,” Materials Transactions, vol. 31, no. 5, pp. 425–428, 1990.
10. A. Inoue, T. Zhang, and T. Masumoto, “Preparation of bulky amorphous Zr-Al-Co-Ni-Cu alloys by copper mold casting and their thermal and mechanical properties,” Materials Transactions, vol. 36, no. 3, pp. 391–398, 1995.
11. A. Peker and W. L. Johnson, “A highly processable metallic glass: ${\text{Zr}}_{41.2}{\text{Ti}}_{13.8}{\text{Cu}}_{12.5}{\text{Ni}}_{10.0}{\text{Be}}_{22.5}$,” Applied Physics Letters, vol. 63, no. 17, pp. 2342–2344, 1993. View at Publisher · View at Google Scholar
12. A. Inoue, T. Negishi, H. M. Kimura, T. Zhang, and A. R. Yavari, “High packing density of Zr- and Pd-based bulk amorphous alloys,” Materials Transactions, vol. 39, no. 2, pp. 318–321, 1998.
13. T. Serikawa, M. Henmi, T. Yamaguchi, H. Oginuma, and K. Kondoh, “Depositions and microstructures of Mg-Si thin film by ion beam sputtering,” Surface and Coatings Technology, vol. 200, no. 14-15, pp. 4233–4239, 2006. View at Publisher · View at Google Scholar
14. M. F. de Oliveira, C. S. Kiminami, and W. J. Botta Filho, “Effect of oxide particles on the crystallization behavior of ${\text{Zr}}_{55}{\text{Al}}_{10}{\text{Ni}}_5{\text{Cu}}_{30}$ alloy,” Materials Science and Engineering A, vol. 304–306, pp. 665–669, 2001. View at Publisher · View at Google Scholar
15. J. Zhang, Y. H. Wei, K. Q. Qiu, H. F. Zhang, M. X. Quan, and Z. Q. Hu, “Crystallization kinetics and pressure effect on crystallization of ${\text{Zr}}_{55}{\text{Al}}_{10}{\text{Ni}}_5{\text{Cu}}_{30}$ bulk metallic glass,” Materials Science and Engineering A, vol. 357, no. 1-2, pp. 386–391, 2003. View at Publisher · View at Google Scholar