Copyright © 2008 S. Benali et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

1. M. Alexandre and Ph. Dubois, “Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials,” Materials Science and Engineering R, vol. 28, no. 1, pp. 1–63, 2000. View at Publisher · View at Google Scholar
2. Y. Komori and K. Kuroda, “Layered silicate-polymer interlocation composites varieties in host materials and properties,” in Polymer-Clay Nanocomposites, T. J. Pinnavaia and G. W. Beall, Eds., pp. 3–18, John Wiley & Sons, New York, NY, USA, 2001.
3. M. Biswas and S. S. Ray, “Recent progress in synthesis and evaluation of polymer-montmorillonite nanocomposites,” Advances in Polymer Science, vol. 155, pp. 167–221, 2001. View at Publisher · View at Google Scholar
4. S. C. Tjong, “Structural and mechanical properties of polymer nanocomposites,” Materials Science and Engineering R, vol. 53, no. 3-4, pp. 73–197, 2006. View at Publisher · View at Google Scholar
5. J. W. Gilman, “Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites,” Applied Clay Science, vol. 15, no. 1-2, pp. 31–49, 1999. View at Publisher · View at Google Scholar
6. S. Peeterbroeck, B. Lepoittevin, E. Pollet, et al., “Polymer layered silicate/carbon nanotube nanocomposites: the catalyzed polymerization approach,” Polymer Engineering and Science, vol. 46, no. 8, pp. 1022–1030, 2006. View at Publisher · View at Google Scholar
7. M. Zanetti, G. Camino, R. Thomann, and R. Mülhaupt, “Synthesis and thermal behaviour of layered silicate-EVA nanocomposites,” Polymer, vol. 42, no. 10, pp. 4501–4507, 2001. View at Publisher · View at Google Scholar
8. B. N. Jang and C. A. Wilkie, “The effects of clay on the thermal degradation behavior of poly(styrene-co-acrylonitirile),” Polymer, vol. 46, no. 23, pp. 9702–9713, 2005. View at Publisher · View at Google Scholar
9. S. Bourbigot, D. L. Vanderhart, J. W. Gilman, et al., “Investigation of nanodispersion in polystyrene-montmorillonite nanocomposites by solid-state NMR,” Journal of Polymer Science Part B, vol. 41, no. 24, pp. 3188–3213, 2003. View at Publisher · View at Google Scholar
10. S. Bourbigot, D. L. Vanderhart, J. W. Gilman, S. Bellayer, H. Stretz, and D. R. Paul, “Solid state NMR characterization and flammability of styrene-acrylonitrile copolymer montmorillonite nanocomposite,” Polymer, vol. 45, no. 22, pp. 7627–7638, 2004. View at Publisher · View at Google Scholar
11. G. Gorrasi, M. Tortora, V. Vittoria, et al., “Vapor barrier properties of polycaprolactone montmorillonite nanocomposites: effect of clay dispersion,” Polymer, vol. 44, no. 8, pp. 2271–2279, 2003. View at Publisher · View at Google Scholar
12. K. Yano, A. Usuki, and A. Okada, “Synthesis and properties of polyimide-clay hybrid films,” Journal of Polymer Science Part A, vol. 35, no. 11, pp. 2289–2294, 1997. View at Publisher · View at Google Scholar
13. B. Lepoittevin, N. Pantoustier, M. Alexandre, C. Calberg, R. Jérôme, and Ph. Dubois, “Polyester layered silicate nanohybrids by controlled grafting polymerization,” Journal of Materials Chemistry, vol. 12, no. 12, pp. 3528–3532, 2002. View at Publisher · View at Google Scholar
14. B. Lepoittevin, N. Pantoustier, M. Devalckenaere, et al., “Polymer/layered silicate nanocomposites by combined intercalative polymerization and melt intercalation: a masterbatch process,” Polymer, vol. 44, no. 7, pp. 2033–2040, 2003. View at Publisher · View at Google Scholar
15. S. Benali, S. Peeterbroeck, P. Brocorens, et al., “Chlorinated polyethylene nanocomposites using PCL/clay nanohybrid masterbatches,” European Polymer Journal, vol. 44, no. 6, pp. 1673–1685, 2008. View at Publisher · View at Google Scholar
16. P. Brocorens, S. Benali, C. Broekaert, et al., “Microscopic morphology of chlorinated polyethylene-based nanocomposites synthesized from poly($\epsilon$-caprolactone)/clay masterbatches,” Langmuir, vol. 24, no. 5, pp. 2072–2080, 2008. View at Publisher · View at Google Scholar · View at PubMed
17. B. Lepoittevin, N. Pantoustier, M. Devalckenaere, et al., “Poly($\epsilon$-caprolactone)/clay nanocomposites by in-situ intercalative polymerization catalyzed by dibutyltin dimethoxide,” Macromolecules, vol. 35, no. 22, pp. 8385–8390, 2002. View at Publisher · View at Google Scholar
18. H. A. Stretz, D. R. Paul, R. Li, H. Keskkula, and P. E. Cassidy, “Intercalation and exfoliation relationships in melt-processed poly(styrene-co-acrylonitrile)/montmorillonite nanocomposites,” Polymer, vol. 46, no. 8, pp. 2621–2637, 2005. View at Publisher · View at Google Scholar
19. L.-L. Chu, S. K. Anderson, J. D. Harris, M. W. Beach, and A. B. Morgan, “Styrene-acrylonitrile (SAN) layered silicate nanocomposites prepared by melt compounding,” Polymer, vol. 45, no. 12, pp. 4051–4061, 2004. View at Publisher · View at Google Scholar
20. M. B. Ko, “Effects of acrylonitrile content on the properties of clay-dispersed poly(styrene-co-acrylonitrile) copolymer nanocomposite,” Polymer Bulletin, vol. 45, no. 2, pp. 183–190, 2000. View at Publisher · View at Google Scholar
21. H. A. Stretz and D. R. Paul, “Properties and morphology of nanocomposites based on styrenic polymers—part I: styrene-acrylonitrile copolymers,” Polymer, vol. 47, no. 24, pp. 8123–8136, 2006. View at Publisher · View at Google Scholar
22. S. W. Kim, W. H. Jo, M. S. Lee, M. B. Ko, and J. Y. Jho, “Preparation of clay-dispersed poly(styrene-co-acrylonitrile) nanocomposites using poly($\epsilon$-caprolactone) as a compatibilizer,” Polymer, vol. 42, no. 24, pp. 9837–9842, 2001. View at Publisher · View at Google Scholar
23. A. Kiersnowski and J. Pigłowski, “Polymer-layered silicate nanocomposites based on poly($\epsilon$-caprolactone),” European Polymer Journal, vol. 40, no. 6, pp. 1199–1207, 2004. View at Publisher · View at Google Scholar
24. H. A. Stretz, D. R. Paul, and P. E. Cassidy, “Poly(styrene-co-acrylonitrile)/montmorillonite organoclay mixtures: a model system for ABS nanocomposites,” Polymer, vol. 46, no. 11, pp. 3818–3830, 2005. View at Publisher · View at Google Scholar
25. A. Grand, “Heat release calorimetry evaluation of fire retardant polymer systems,” in Proceedings of the 42nd International SAMPE Symposium and Exhibition, vol. 5, Anaheim, Calif, USA, May 1997.
26. M. J. Scudmore, P. J. Briggs, and F. H. Prager, “Cone calorimetry—a review of tests carried out on plastics for the association of plastic manufacturers in Europe,” Fire and Materials, vol. 15, no. 2, pp. 65–84, 1991. View at Publisher · View at Google Scholar
27. V. Babrauskas, “Development of cone calorimeter—a bench scale rate of heat release based on oxygen consumption,” NBS-IR, National Bureau of Standards, Gaithersburg, Md, USA, 1982.
28. O. Persenaire, M. Alexandre, Ph. Degée, and Ph. Dubois, “Mechanisms and kinetics of thermal degradation of poly($\epsilon$-caprolactone),” Biomacromolecules, vol. 2, no. 1, pp. 288–294, 2001. View at Publisher · View at Google Scholar
29. H. Abe, N. Takahshi, K. J. Kim, M. Mochizuki, and Y. Doi, “Effects of residual zinc compounds and chain-end structure on thermal degradation of poly($\epsilon$-caprolactone),” Biomacromolecules, vol. 5, no. 4, pp. 1480–1488, 2004. View at Publisher · View at Google Scholar · View at PubMed
30. J. W. Gilman, C. L. Jackson, A. B. Morgan, et al., “Flammability properties of polymer—layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites,” Chemistry of Materials, vol. 12, no. 7, pp. 1866–1873, 2000. View at Publisher · View at Google Scholar
31. G. Camino, G. Tartaglione, A. Frache, C. Manferti, and G. Costa, “Thermal and combustion behaviour of layered silicate-epoxy nanocomposites,” Polymer Degradation and Stability, vol. 90, no. 2, pp. 354–362, 2005. View at Publisher · View at Google Scholar
32. O. Gain, E. Espuche, E. Pollet, M. Alexandre, and Ph. Dubois, “Gas barrier properties of poly($\epsilon$-caprolactone)/clay nanocomposites: influence of the morphology and polymer/clay interactions,” Journal of Polymer Science Part B, vol. 43, no. 2, pp. 205–214, 2005. View at Publisher · View at Google Scholar
33. J. S. Chiou and D. R. Paul, “Gas permeation in miscible homopolymer-copolymer blends. I. Poly(methyl methacrylate) and styrene/acrylonitrile copolymers,” Journal of Applied Polymer Science, vol. 34, no. 3, pp. 1037–1056, 1987. View at Publisher · View at Google Scholar
34. S. Wang, H. Nishide, and E. Tsuchida, “Oxygen permeability of biodegradable copolycaprolactones,” Polymers for Advanced Technologies, vol. 10, no. 5, pp. 282–286, 1999. View at Publisher · View at Google Scholar
35. J. S. Chiou and D. R. Paul, “Gas permeation in miscible homopolymer-copolymer blends: II. Tetramethyl bisphenol-A polycarbonate and a styrene/acrylonitrile copolymer,” Journal of Applied Polymer Science, vol. 34, no. 4, pp. 1503–1520, 1987. View at Publisher · View at Google Scholar