Research Article
Cutting Force in Stone Machining by Diamond Disk
Table 3
Experimental plan.
| Factors | no. Levels | Levels |
| Cutting depth (mm) | 14 | 0.01-0.02-0.03-0.04-0.05-0.06- | 0.07-0.08-0.09-0.1-0.2-0.3-0.4-0.5 | Feed speed (mm/min) | 3 | 200-400-600 | Cutting speed (rpm) | 1 | 2000 | Replications | 3 | |
| Total cuts | 126 | |
|
|