- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Advances in Materials Science and Engineering
Volume 2011 (2011), Article ID 232640, 12 pages
doi:10.1155/2011/232640
The Fabrication of Automobile Components by Applying Electromagnetic Stirring in Semisolid Process
1Precision Manufacturing Systems Division, Pusan National University, Pusan 609-735, Republic of Korea
2School of Mechanical Engineering, Pusan National University, Pusan 609-735, Republic of Korea
Received 1 September 2010; Accepted 19 November 2010
Academic Editor: Shoujin Sun
Copyright © 2011 H. H. Kim and C. G. Kang. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
H. H. Kim and C. G. Kang, “The Fabrication of Automobile Components by Applying Electromagnetic Stirring in Semisolid Process,” Advances in Materials Science and Engineering, vol. 2011, Article ID 232640, 12 pages, 2011. doi:10.1155/2011/232640