- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Advances in Materials Science and Engineering
Volume 2011 (2011), Article ID 767260, 6 pages
doi:10.1155/2011/767260
Influence of Welding Parameters on Weld Formation and Microstructure of Dual-Laser Beams Welded T-Joint of Aluminum Alloy
1Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiao Tong University, Shanghai 200240, China
2Shanghai Aircraft Manufacturing Co., Ltd. Shanghai 200436, China
Received 15 March 2011; Revised 24 May 2011; Accepted 26 May 2011
Academic Editor: J. Dutta Majumdar
Copyright © 2011 Min Li et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Min Li, Zhuguo Li, Yong Zhao, Hao Li, Yuhua Wang, and Jian Huang, “Influence of Welding Parameters on Weld Formation and Microstructure of Dual-Laser Beams Welded T-Joint of Aluminum Alloy,” Advances in Materials Science and Engineering, vol. 2011, Article ID 767260, 6 pages, 2011. doi:10.1155/2011/767260