About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2012 (2012), Article ID 151629, 14 pages
http://dx.doi.org/10.1155/2012/151629
Review Article

Recent Advances in the Deposition of Diamond Coatings on Co-Cemented Tungsten Carbides

1Dipartimento di Scienze e Tecnologie Chimiche, Università degli Studi di Roma Tor Vergata, Via della Ricerca Scientifica, 00133 Roma, Italy
2Dipartimento di Ingegneria Meccanica, Università degli Studi di Roma Tor Vergata, Via del Politecnico, 00133 Roma, Italy

Received 2 June 2012; Accepted 13 August 2012

Academic Editor: Pavel Lejcek

Copyright © 2012 R. Polini et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. X. Chen and J. Narayan, “Effect of the chemical nature of transition-metal substrates on chemical-vapor deposition of diamond,” Journal of Applied Physics, vol. 74, no. 6, pp. 4168–4173, 1993. View at Publisher · View at Google Scholar · View at Scopus
  2. K. Shibuki, M. Yagi, K. Saijo, and S. Takatsu, “Adhesion strength of diamond films on cemented carbide substrates,” Surface and Coatings Technology, vol. 36, no. 1-2, pp. 295–302, 1988. View at Scopus
  3. J. Oakes, X. X. Pan, R. Haubner, and B. Lux, “Chemical vapour deposition diamond coatings on cemented carbide tools,” Surface and Coatings Technology, vol. 47, no. 1–3, pp. 600–607, 1991. View at Scopus
  4. I. Y. Konyashin and M. B. Guseva, “Thin films comparable with WC-Co cemented carbides as underlayers for hard and superhard coatings: the state of the art,” Diamond and Related Materials, vol. 5, no. 3–5, pp. 575–579, 1996. View at Scopus
  5. I. Endler, A. Leonhardt, H. J. Scheibe, and R. Born, “Interlayers for diamond deposition on tool materials,” Diamond and Related Materials, vol. 5, no. 3–5, pp. 299–303, 1996. View at Scopus
  6. X. Xiao, B. W. Sheldon, E. Konca, L. C. Lev, and M. J. Lukitsch, “The failure mechanism of chromium as the interlayer to enhance the adhesion of nanocrystalline diamond coatings on cemented carbide,” Diamond and Related Materials, vol. 18, no. 9, pp. 1114–1117, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Saijo, M. Yagi, K. Shibuki, and S. Takatsu, “Improvements in adhesive strength and cutting performance of diamond-coated tools,” Surface and Coatings Technology, vol. 47, no. 1–3, pp. 646–653, 1991. View at Scopus
  8. R. K. Singh, D. R. Gilbert, J. Fitz-Gerald, S. Harkness, and D. G. Lee, “Engineered interfaces for adherent diamond coatings on large thermal-expansion coefficient mismatched substrates,” Science, vol. 272, no. 5260, pp. 396–398, 1996. View at Scopus
  9. S. Kubelka, R. Haubner, B. Lux, R. Steiner, G. Stingeder, and M. Grasserbauer, “Influences of WC-Co hard metal substrate pre-treatments with boron and silicon on low pressure diamond deposition,” Diamond and Related Materials, vol. 3, no. 11-12, pp. 1360–1369, 1994. View at Scopus
  10. T. Li, Q. Lou, J. Dong, Y. Wei, and J. Liu, “Modified surface morphology in surface ablation of cobalt-cemented tungsten carbide with pulsed UV laser radiation,” Applied Surface Science, vol. 172, no. 3-4, pp. 331–344, 2001. View at Publisher · View at Google Scholar · View at Scopus
  11. M. Barletta, G. Rubino, and A. Gisario, “Co removal and phase transformations during high power diode laser irradiation of cemented carbide,” Applied Surface Science, vol. 257, no. 9, pp. 4239–4245, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Barletta, G. Rubino, and A. Gisario, “Adhesion and wear resistance of CVD diamond coatings on laser treated WC-Co substrates,” Wear, vol. 271, no. 9-10, pp. 2016–2024, 2011. View at Publisher · View at Google Scholar · View at Scopus
  13. N. M. Everitt, R. F. Silva, J. Vieira, C. A. Rego, C. R. Henderson, and P. W. May, “Friction measurements on hot filament CVD diamond films deposited on etched tungsten carbide surfaces,” Diamond and Related Materials, vol. 4, no. 5-6, pp. 730–734, 1995. View at Scopus
  14. M. G. Peters and R. H. Cummings, European Patent 0519587 A1, 1992.
  15. J. Miao, J. Song, Y. Xue, Y. Tong, W. Tang, and F. Lu, “Effect of a two-step pretreatment method on adhesion of CVD diamond coatings on cemented carbide substrates,” Surface and Coatings Technology, vol. 187, no. 1, pp. 33–36, 2004. View at Publisher · View at Google Scholar · View at Scopus
  16. R. Polini, F. P. Mantini, M. Barletta, R. Valle, and F. Casadei, “Hot filament chemical vapour deposition and wear resistance of diamond films on WC-Co substrates coated using PVD-arc deposition technique,” Diamond and Related Materials, vol. 15, no. 9, pp. 1284–1291, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. S. K. Sarangi, A. Chattopadhyay, and A. K. Chattopadhyay, “Effect of pretreatment, seeding and interlayer on nucleation and growth of HFCVD diamond films on cemented carbide tools,” International Journal of Refractory Metals and Hard Materials, vol. 26, no. 3, pp. 220–231, 2008. View at Publisher · View at Google Scholar · View at Scopus
  18. G. Cabral, J. Gäbler, J. Lindner, J. Grácio, and R. Polini, “A study of diamond film deposition on WC-Co inserts for graphite machining: effectiveness of SiC interlayers prepared by HFCVD,” Diamond and Related Materials, vol. 17, no. 6, pp. 1008–1014, 2008. View at Publisher · View at Google Scholar · View at Scopus
  19. F. Fendrych, A. Taylor, L. Peksa et al., “Growth and characterization of nanodiamond layers prepared using the plasma-enhanced linear antennas microwave CVD system,” Journal of Physics D, vol. 43, no. 37, Article ID 374018, 2010. View at Publisher · View at Google Scholar
  20. S. D. Wolter, J. T. Glass, and B. R. Stoner, “Bias induced diamond nucleation studies on refractory metal substrates,” Journal of Applied Physics, vol. 77, no. 10, pp. 5119–5124, 1995. View at Publisher · View at Google Scholar · View at Scopus
  21. E. R. Kupp, W. R. Drawl, and K. E. Spear, “Interlayers for diamond-coated cutting tools,” Surface and Coatings Technology, vol. 68-69, pp. 378–383, 1994. View at Scopus
  22. C. R. Lin, C. T. Kuo, and R. M. Chang, “Improvement in adhesion of diamond films on cemented WC substrate with Ti-Si interlayers,” Diamond and Related Materials, vol. 7, no. 11-12, pp. 1628–1632, 1998. View at Scopus
  23. K. Saijo, M. Yagi, K. Shibuki, and S. Takatsu, “Improvements in adhesive strength and cutting performance of diamond-coated tools,” Surface and Coatings Technology, vol. 47, no. 1–3, pp. 646–653, 1991. View at Scopus
  24. E. J. Oles, A. Inspektor, and C. E. Bauer, “The new diamond-coated carbide cutting tools,” Diamond and Related Materials, vol. 5, no. 6–8, pp. 617–624, 1996. View at Scopus
  25. T. Sato, Y. Hosokawa, S. Ito, and K. Akashi, “Plasma carbonitriding of cemented carbide substrate as an effective pretreatment process for diamond CVD,” Surface and Coatings Technology, vol. 112, no. 1–3, pp. 189–193, 1999. View at Scopus
  26. W. D. Man, J. H. Wang, Z. B. Ma, and C. X. Wang, “Plasma boronitriding of WC(Co) substrate as an effective pretreatment process for diamond CVD,” Surface and Coatings Technology, vol. 171, no. 1–3, pp. 241–246, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. D. G. Lee, J. M. Fitz-Gerald, and R. K. Singh, “Novel method for adherent diamond coatings on cemented carbide substrates,” Surface and Coatings Technology, vol. 100-101, no. 1–3, pp. 187–191, 1998. View at Scopus
  28. T. Li, Q. Lou, J. Dong, Y. Wei, and J. Liu, “Selective removal of cobalt binder in surface ablation of tungsten carbide hardmetal with pulsed UV laser,” Surface and Coatings Technology, vol. 145, no. 1–3, pp. 16–23, 2001. View at Publisher · View at Google Scholar · View at Scopus
  29. L. Tiejun, L. Qihong, D. Jingxing et al., “Improved adhesion of diamond coating on cobalt-cemented tungsten carbide hardmetal by using pulsed-UV-laser substrate surface pretreatment,” Applied Surface Science, vol. 193, no. 1–4, pp. 102–119, 2002. View at Publisher · View at Google Scholar · View at Scopus
  30. P. C. Jindal, D. T. Quinto, and G. J. Wolfe, “Adhesion measurements of chemically vapor deposited and physically vapor deposited hard coatings on WCCo substrates,” Thin Solid Films, vol. 154, no. 1-2, pp. 361–375, 1987. View at Scopus
  31. R. Polini, P. D'Antonio, S. Lo Casto, V. F. Ruisi, and E. Traversa, “Cutting performance and indentation behaviour of diamond films on Co-cemented tungsten carbide,” Surface and Coatings Technology, vol. 123, no. 1, pp. 78–83, 2000. View at Scopus
  32. C. Wild, N. Herres, and P. Koidl, “Texture formation in polycrystalline diamond films,” Journal of Applied Physics, vol. 68, no. 3, pp. 973–978, 1990. View at Publisher · View at Google Scholar · View at Scopus
  33. T. Schuelke, T. Witke, H. J. Scheibe et al., “Comparison of DC and AC arc thin film deposition techniques,” Surface and Coatings Technology, vol. 120-121, pp. 226–232, 1999. View at Publisher · View at Google Scholar · View at Scopus
  34. R. Polini, M. Santarelli, and E. Traversa, “Nucleation and adhesion of diamond films on Co cemented tungsten carbide,” Journal of the Electrochemical Society, vol. 146, no. 12, pp. 4490–4498, 1999. View at Scopus
  35. R. Polini, M. Barletta, and M. Delogu, “Fluidized bed micro-machining and HFCVD of diamond films onto Co-cemented tungsten carbide (WC-Co) hardmetal slabs,” Thin Solid Films, vol. 515, no. 1, pp. 87–94, 2006. View at Publisher · View at Google Scholar · View at Scopus