Table of Contents for Year 2013 [47 articles]

• Improvement of Dispersion and Color Effect of Organic Pigments in Polymeric Films via Microencapsulation by the Miniemulsion Technique, Dongming Qi, Zhijie Chen, Lei Yang, Zhihai Cao, and Minghua Wu
  Volume 2013 (2013), Article ID 790321, 6 pages
• Effect of Ground Waste Concrete Powder on Cement Properties, Xianwei Ma and Zhenyu Wang
  Volume 2013 (2013), Article ID 918294, 5 pages
• The Behavior of Masonry Walls with Reinforced Plaster Mortar, Hakan Basaran, Ali Demir, and Muhiddin Bagci
  Volume 2013 (2013), Article ID 436946, 9 pages
• Study on Thixojoining Process Using Partial Remelting Method, M. N. Mohammed, M. Z. Omar, M. S. Salleh, and K. S. Alhawari
  Volume 2013 (2013), Article ID 251472, 8 pages
• The Effect of Annealing on the Structural and Optical Properties of Titanium Dioxide Films Deposited by Electron Beam Assisted PVD, Yaser M. Abdulraheem, Sahar Ghoraishi, Lidia Arockia-Thai, Suji K. Zachariah, and Moustafa Ghannam
  Volume 2013 (2013), Article ID 574738, 10 pages
• Biopolymer Doped with Titanium Dioxide Superhydrophobic Photocatalysis as Self-Clean Coating for Lightweight Composite, Anika Zafiah M. Rus, S. R. Mohid, S. Nurulsaidatulsyida, and N. Marsi
  Volume 2013 (2013), Article ID 486253, 9 pages
• Pressure Dependence of the Electrical Resistivity in Polymer Polyaniline, Daihui Huang, Dong Xie, Jingjing Gao, Wangchun Lv, and Shiming Hong
  Volume 2013 (2013), Article ID 124365, 5 pages
• Mechanical Properties of Palm Fibre Reinforced Recycled HDPE, B. Aldousiri, M. Alajmi, and A. Shalwan
  Volume 2013 (2013), Article ID 508179, 7 pages
• Wood versus Plant Fibers: Similarities and Differences in Composite Applications, Bo Madsen and E. Kristofer Gamstedt
  Volume 2013 (2013), Article ID 564346, 14 pages
• Structural and Morphological Characterization of Micro and Nanofibers Produced by Electrospinning and Solution Blow Spinning: A Comparative Study, Juliano E. Oliveira, Luiz H. C. Mattoso, William J. Orts, and Eliton S. Medeiros
  Volume 2013 (2013), Article ID 409572, 14 pages
• Study on Tensile Properties of Nanoreinforced Epoxy Polymer: Macroscopic Experiments and Nanoscale FEM Simulation Prediction, Zhenqing Wang, Fang Liu, Wenyan Liang, and Limin Zhou
  Volume 2013 (2013), Article ID 392450, 8 pages
• Stay-in-Place Formwork of TRC Designed as Shear Reinforcement for Concrete Beams, S. Verbruggen, O. Remy, J. Wastiels, and T. Tysmans
  Volume 2013 (2013), Article ID 648943, 9 pages
• Reinforcement of Recycled Foamed Asphalt Using Short Polypropylene Fibers, Yongjoo Kim and Tae-Soon Park
  Volume 2013 (2013), Article ID 903236, 9 pages
• Structural and Optical Properties of Chemical Bath Deposited Silver Oxide Thin Films: Role of Deposition Time, A. C. Nwanya, P. E. Ugwuoke, B. A. Ezekoye, R. U. Osuji, and F. I. Ezema
  Volume 2013 (2013), Article ID 450820, 8 pages
• Microstructural Study of Neodmium Nickelate Doped with Strontium Synthesized by Gelatin Method, R. M. P. B. Oliveira, P. M. Pimentel, J. H. Araújo, D. M. A. Melo, M. A. F. Melo, and A. E. Martinelli
  Volume 2013 (2013), Article ID 926540, 5 pages
• Effects of Fiber Orientation and Material Isotropy on the Analytical Elastic Solution of a Stiffened Orthotropic Panel Subjected to a Combined Loading, S. K. Deb Nath
  Volume 2013 (2013), Article ID 710143, 13 pages
• Investigation of Rock Failure Pattern in Creep by Digital Speckle Correlation Method, Yunliang Tan, Yanchun Yin, and Tongbin Zhao
  Volume 2013 (2013), Article ID 916069, 9 pages
• The Production of Nickel-Chromium-Molybdenum Alloy with Open Pore Structure as an Implant and the Investigation of Its Biocompatibility In Vivo, Yusuf Er and Emine Unsaldi
  Volume 2013 (2013), Article ID 568479, 7 pages
• Improved Surface Wettability of Water by Applying SiC/Ti6Al4V Coatings on Carbon/Carbon Composites, Lei-Lei Zhang, He-Jun Li, Ke-Zhi Li, Yu-Lei Zhang, Jin-Hua Lu, Sheng Cao, Xue-Ni Zhao, and Zi-Bo He
  Volume 2013 (2013), Article ID 703610, 5 pages
• Behavior of HPC with Fly Ash after Elevated Temperature, Huai-Shuai Shang and Ting-Hua Yi
  Volume 2013 (2013), Article ID 478421, 7 pages
• Viscoelastic-Viscoplastic Modelling of the Scratch Response of PMMA, G. Kermouche, N. Aleksy, and J. M. Bergheau
  Volume 2013 (2013), Article ID 289698, 10 pages
• Synthesis of Hollow Silica Nanospheres by Sacrificial Polystyrene Templates for Thermal Insulation Applications, Linn Ingunn C. Sandberg, Tao Gao, Bjørn Petter Jelle, and Arild Gustavsen
  Volume 2013 (2013), Article ID 483651, 6 pages
• Feasibility of Pulverized Oyster Shell as a Cementing Material, Chou-Fu Liang and Hung-Yu Wang
  Volume 2013 (2013), Article ID 809247, 7 pages
• Geotechnical and Physico-Chemical Characterization of Low Lime Fly Ashes, Arif Ali Baig Moghal
  Volume 2013 (2013), Article ID 674306, 11 pages
• Reduction of Postfire Properties of High-Strength Concrete, Neno Torić, Ivica Boko, and Bernardin Peroš
  Volume 2013 (2013), Article ID 712953, 9 pages
• Modelling the Shear-Tension Coupling of Woven Engineering Fabrics, F. Abdiwi, P. Harrison, and W. R. Yu
  Volume 2013 (2013), Article ID 786769, 9 pages
• Sensitivity Analysis of the Artificial Neural Network Outputs in Friction Stir Lap Joining of Aluminum to Brass, Mohammad Hasan Shojaeefard, Mostafa Akbari, Mojtaba Tahani, and Foad Farhani
  Volume 2013 (2013), Article ID 574914, 7 pages
• Interfacial Reaction of Sn-Ag-Cu Lead-Free Solder Alloy on Cu: A Review, Liu Mei Lee and Ahmad Azmin Mohamad
  Volume 2013 (2013), Article ID 123697, 11 pages
• Impact Behavior of Recycled Aggregate Concrete Based on Split Hopkinson Pressure Bar Tests, Yubin Lu, Xing Chen, Xiao Teng, and Shu Zhang
  Volume 2013 (2013), Article ID 391957, 8 pages
• Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials, Cristina Alia, María V. Biezma, Paz Pinilla, José M. Arenas, and Juan C. Suárez
  Volume 2013 (2013), Article ID 869075, 10 pages
• Curing Pressure Influence of Out-of-Autoclave Processing on Structural Composites for Commercial Aviation, Vasileios M. Drakonakis, James C. Seferis, and Charalambos C. Doumanidis
  Volume 2013 (2013), Article ID 356824, 14 pages
• Behavior of Concrete Columns Repaired with Polymer Mortar and Epoxy Fiber Panel, Sungnam Hong and Sun-Kyu Park
  Volume 2013 (2013), Article ID 748294, 13 pages
• The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining, Ali Akbar LotfiNeyestanak and Saeed Daneshmand
  Volume 2013 (2013), Article ID 457186, 6 pages
• Reduction of Maximum and Residual Drifts on Posttensioned Steel Frames with Semirigid Connections, Arturo López-Barraza, Edén Bojórquez, Sonia E. Ruiz, and Alfredo Reyes-Salazar
  Volume 2013 (2013), Article ID 192484, 11 pages
• Terahertz Wave Approach and Application on FRP Composites, Kwang-Hee Im, David K. Hsu, Chien-Ping Chiou, Daniel J. Barnard, Jong-An Jung, and In-Young Yang
  Volume 2013 (2013), Article ID 563962, 10 pages
• Evaluation of PE Films Having NIR-Reflective Additives for Greenhouse Applications in Arid Regions, Syed K. H. Gulrez, Ahmed M. Abdel-Ghany, Ibrahim M. Al-Helal, Saeed M. Al-Zaharani, and Abdullah A. Alsadon
  Volume 2013 (2013), Article ID 575081, 8 pages
• Processing and Validation of Whey-Protein-Coated Films and Laminates at Semi-Industrial Scale as Novel Recyclable Food Packaging Materials with Excellent Barrier Properties, E. Bugnicourt, M. Schmid, O. Mc. Nerney, J. Wildner, L. Smykala, A. Lazzeri, and P. Cinelli
  Volume 2013 (2013), Article ID 496207, 10 pages
• A Review of Structural Performance of Oil Palm Empty Fruit Bunch Fiber in Polymer Composites, Reza Mahjoub, Jamaludin Bin Mohamad Yatim, and Abdul Rahman Mohd Sam
  Volume 2013 (2013), Article ID 415359, 9 pages
• Investigations of Physical and Rheological Properties of Aged Rubberised Bitumen, Asim Hassan Ali, Nuha S. Mashaan, and Mohamed Rehan Karim
  Volume 2013 (2013), Article ID 239036, 7 pages
• Study on Microchannel Design and Burst Frequency Detection for Centrifugal Microfluidic System, Yaw-Jen Chang, Shia-Chung Chen, and Cheng-Li Hsu
  Volume 2013 (2013), Article ID 137347, 9 pages
• Thermal and Cure Kinetics of Epoxy Molding Compounds Cured with Thermal Latency Accelerators, Chean-Cheng Su, Chien-Huan Wei, and Bo-Ching Li
  Volume 2013 (2013), Article ID 391267, 9 pages
• On the Inertia Term of Projectile's Penetration Resistance, Yu Shan, Haijun Wu, Fenglei Huang, and Jinzhu Li
  Volume 2013 (2013), Article ID 525391, 6 pages
• Effect of Cobalt Fillers on Polyurethane Segmentations Investigated by Synchrotron Small Angle X-Ray Scattering, Krit Koyvanich, Chitnarong Sirisathitkul, and Supagorn Rugmai
  Volume 2013 (2013), Article ID 493867, 8 pages
• Calculated Changes in the Elastic Properties of MgCNi₃ at the Superconducting Transition, R. Abd-Shukor
  Volume 2013 (2013), Article ID 247393, 3 pages
• Effects of Clay and Moisture Content on Direct Shear Tests for Clay-Sand Mixtures, Muawia A. Dafalla
  Volume 2013 (2013), Article ID 562726, 8 pages
• Compression of Multilayered Composite Electrospun Scaffolds: A Novel Strategy to Rapidly Enhance Mechanical Properties and Three Dimensionality of Bone Scaffolds, Parthasarathy A. Madurantakam, Isaac A. Rodriguez, Koyal Garg, Jennifer M. McCool, Peter C. Moon, and Gary L. Bowlin
  Volume 2013 (2013), Article ID 561273, 9 pages
• Numerical Tools for Composite Woven Fabric Preforming, Abel Cherouat and Houman Bourouchaki
  Volume 2013 (2013), Article ID 709495, 18 pages