About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 142343, 12 pages
http://dx.doi.org/10.1155/2013/142343
Research Article

Modelling the Influence of Manufacturing Process Variables on Dimensional Changes of Porcelain Tiles

1Programa de Pós-Graduação em Ciência e Engenharia de Materiais (PGMAT), Universidade Federal de Santa Catarina (UFSC), 88040-900 Florianópolis, SC, Brazil
2Departamento de Ingeniería Química y Ambiental, Universidad Nacional de Colombia, 111321 Bogotá, Colombia
3Instituto de Tecnología Cerámica (ITC), Asociación de Investigación de las Industrias Cerámicas, Universitat Jaume I, 12006 Castellón, Spain

Received 24 February 2013; Revised 9 September 2013; Accepted 10 September 2013

Academic Editor: Augusto Deus

Copyright © 2013 Dolly Santos-Barbosa et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Dolly Santos-Barbosa, Dachamir Hotza, Juan Boix, and Gustavo Mallol, “Modelling the Influence of Manufacturing Process Variables on Dimensional Changes of Porcelain Tiles,” Advances in Materials Science and Engineering, vol. 2013, Article ID 142343, 12 pages, 2013. doi:10.1155/2013/142343