About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 382503, 5 pages
http://dx.doi.org/10.1155/2013/382503
Research Article

Dynamic Shear Characteristic and Fracture Feature of Inconel 690 Alloy under Different High Strain Rates and Temperatures

Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung 807, Taiwan

Received 13 September 2013; Accepted 6 October 2013

Academic Editor: Jacques Huot

Copyright © 2013 Tao-Hsing Chen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J.-K. Hong, I.-S. Kim, C.-Y. Park, and E.-S. Kim, “Microstructural effects on the fretting wear of Inconel 690 steam generator tube,” Wear, vol. 259, no. 1–6, pp. 349–355, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. V. Venkatesh and H. J. Rack, “Elevated temperature hardening of INCONEL 690,” Mechanics of Materials, vol. 30, no. 1, pp. 69–81, 1998. View at Scopus
  3. Y. F. Yin and R. G. Faulkner, “Model predictions of grain boundary chromium depletion in Inconel 690,” Corrosion Science, vol. 49, no. 5, pp. 2177–2197, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Zhu, C.-W. Kim, and D. E. Day, “Corrosion behavior of Inconel 690 and 693 in an iron phosphate melt,” Journal of Nuclear Materials, vol. 336, no. 1, pp. 47–53, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. V. Venkatesh and H. J. Rack, “A neural network approach to elevated temperature creep-fatigue life prediction,” International Journal of Fatigue, vol. 21, no. 3, pp. 225–234, 1999. View at Publisher · View at Google Scholar · View at Scopus
  6. J. M. Boursier, D. Desjardins, and F. Vaillant, “The influence of the strain-rate on the stress corrosion cracking of alloy 600 in high temperature primary water,” Corrosion Science, vol. 37, no. 3, pp. 493–508, 1995. View at Scopus
  7. J. J. Kai and M. N. Liu, “The effects of heat treatment on the carbide evolution and the chromium depletion along grain boundary of inconel 690 alloy,” Scripta Metallurgica, vol. 23, no. 1, pp. 17–22, 1989. View at Scopus
  8. S. Guo, D. Li, H. Pen, Q. Guo, and J. Hu, “Hot deformation and processing maps of Inconel 690 superalloy,” Journal of Nuclear Materials, vol. 410, no. 1–3, pp. 52–58, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. H.-B. Park, Y.-H. Kim, B.-W. Lee, and K.-S. Rheem, “Effect of heat treatment on fatigue crack growth rate of Inconel 690 and Inconel 600,” Journal of Nuclear Materials, vol. 231, no. 3, pp. 204–212, 1996. View at Publisher · View at Google Scholar · View at Scopus
  10. M.-K. Lim, S.-D. Oh, and Y.-Z. Lee, “Friction and wear of Inconel 690 and Inconel 600 for steam generator tube in room temperature water,” Nuclear Engineering and Design, vol. 226, no. 2, pp. 97–105, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. W.-S. Lee, C.-Y. Liu, and T.-N. Sun, “Dynamic impact response and microstructural evolution of inconel 690 superalloy at elevated temperatures,” International Journal of Impact Engineering, vol. 32, no. 1–4, pp. 210–223, 2006. View at Publisher · View at Google Scholar · View at Scopus
  12. W.-S. Lee and H.-C. Shen, “Comparisons of deformation and fracture behaviour of PC/ABS blend and ABS copolymer under dynamic shear loading,” Materials Science and Technology, vol. 20, no. 1, pp. 8–15, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. W.-S. Lee, T.-H. Chen, and Q.-J. Gong, “Dynamic shear behaviour of unweldable aluminum-scandium (Al-Sc) alloy,” Materials Transactions, vol. 48, no. 3, pp. 500–509, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. S. S. Ezz, Y. Q. Sun, and P. B. Hirsch, “Strain rate dependence of the flow stress and work hardening of γ′,” Materials Science and Engineering A, vol. 192-193, no. 1, pp. 45–52, 1995. View at Scopus
  15. W.-S. Lee and Y.-C. Lin, “Strain rate and temperature dependence of dynamic shear properties of Al-Sc alloy,” Materials Science and Technology, vol. 22, no. 5, pp. 571–582, 2006. View at Publisher · View at Google Scholar · View at Scopus