About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 382635, 10 pages
http://dx.doi.org/10.1155/2013/382635
Research Article

A Study on the Influence of the Forming Strategy on the Main Strains, Thickness Reduction, and Forces in a Single Point Incremental Forming Process

Lucian Blaga University of Sibiu, Faculty of Engineering, Victoriei Boulevard 10, 550024 Sibiu, Romania

Received 25 May 2013; Revised 17 August 2013; Accepted 18 August 2013

Academic Editor: Tao Zhang

Copyright © 2013 Adrian Blaga and Valentin Oleksik. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Adrian Blaga and Valentin Oleksik, “A Study on the Influence of the Forming Strategy on the Main Strains, Thickness Reduction, and Forces in a Single Point Incremental Forming Process,” Advances in Materials Science and Engineering, vol. 2013, Article ID 382635, 10 pages, 2013. doi:10.1155/2013/382635