Mechanical Characterization of Cryomilled Al Powder Consolidated by High-Frequency Induction Heat Sintering

<table>True stress strain response in simple compression for consolidated samples from the 7 hrs cryomilled powders. The heating rate used for this sample was 800°C/min. Also shown in the figure are the true stress strain responses for as-received powder consolidated at 500°C for 3 min., and an ECAPed specimen [<a href="/journals/amse/2013/397351/#B16">16</a>].</table>

Advances in Materials Science and Engineering

fig11

Figure 11

Figure 11: Mechanical Characterization of Cryomilled Al Powder Consolidated by High-Frequency Induction Heat Sintering 