Influence of pH and Fluoride Species on the Corrosion Behavior of Ti-xNb-13Zr Alloys in Ringer’s Solution

<table>Ranges of OCP values measured after 3 h exposure in Ringer’s solution of pH 2, 5, and 7.5 without fluoride and containing 1000 ppm F at 37°C.</table>

Advances in Materials Science and Engineering

fig2

Figure 2

Figure 2: Influence of pH and Fluoride Species on the Corrosion Behavior of Ti-xNb-13Zr Alloys in Ringer’s Solution 