About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 457186, 6 pages
http://dx.doi.org/10.1155/2013/457186
Research Article

The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining

1Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
2Department of Mechanical Engineering, Majlesi Branch, Islamic Azad University, Isfahan 86316-56451, Iran

Received 12 January 2013; Accepted 31 January 2013

Academic Editor: S. Miyazaki

Copyright © 2013 Ali Akbar LotfiNeyestanak and Saeed Daneshmand. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Ali Akbar LotfiNeyestanak and Saeed Daneshmand, “The Effect of Operational Cutting Parameters on Nitinol-60 in Wire Electrodischarge Machining,” Advances in Materials Science and Engineering, vol. 2013, Article ID 457186, 6 pages, 2013. doi:10.1155/2013/457186