- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Advances in Materials Science and Engineering
Volume 2013 (2013), Article ID 869075, 10 pages
http://dx.doi.org/10.1155/2013/869075
Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials
1Center for Durability and Structural Integrity of Materials (CISDEM-UPM/CSIC), Universidad Politécnica de Madrid, C/Ronda Valencia, 3-28015 Madrid, Spain
2Research Group on Degradation and Corrosion of Materials, Universidad de Cantabria, c/Gamazo, 1-39004 Santander, Spain
Received 16 November 2012; Revised 15 January 2013; Accepted 22 January 2013
Academic Editor: Luigi Nicolais
Copyright © 2013 Cristina Alia et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Cristina Alia, María V. Biezma, Paz Pinilla, José M. Arenas, and Juan C. Suárez, “Degradation in Seawater of Structural Adhesives for Hybrid Fibre-Metal Laminated Materials,” Advances in Materials Science and Engineering, vol. 2013, Article ID 869075, 10 pages, 2013. doi:10.1155/2013/869075