Research Article
New Measurement Method and Uncertainty Estimation for Plate Dimensions and Surface Quality
Table 7
The classification results of tile first specimen using new measurement method in mm.
(a) |
| Test no. | Measured values of ΔC | Measured values of | Measured values of | at | at | at | at | at | at |
| 1 | 0.7321 | 0.8357 | 0.7713 | 0.8275 | 0.2141 | 0.3453 | 2 | 0.7318 | 0.8359 | 0.7715 | 0.8272 | 0.2140 | 0.3456 | 3 | 0.7322 | 0.8361 | 0.7715 | 0.8270 | 0.2139 | 0.3458 | 4 | 0.7319 | 0.8359 | 0.7714 | 0.8267 | 0.2138 | 0.3462 | 5 | 0.7320 | 0.8356 | 0.7706 | 0.8261 | 0.2137 | 0.3461 |
| Average | 0.7320 | 0.8358 | 0.7713 | 0.8269 | 0.2139 | 0.3458 | Maximum | 0.8361 | 0.8275 | 0.3462 |
|
|
(b) |
| Specific calculated parameters, % | | | |
| 0.14 | 0.16 | 0.06 |
|
|