Research Article
New Measurement Method and Uncertainty Estimation for Plate Dimensions and Surface Quality
Table 8
The classification results of tile second sample using new measurement method in mm.
(a) |
| Test no. | Measured values of | Measured values of | Measured values of | at | at | at | at | at | at |
| 1 | 0.7814 | 0.8375 | 0.6773 | 0.9625 | 0.1453 | 0.2481 | 2 | 0.7812 | 0.8377 | 0.6767 | 0.9625 | 0.1451 | 0.2478 | 3 | 0.7812 | 0.8377 | 0.6771 | 0.9626 | 0.1454 | 0.2480 | 4 | 0.7808 | 0.8377 | 0.6772 | 0.9623 | 0.1453 | 0.2478 | 5 | 0.7805 | 0.8374 | 0.6768 | 0.9625 | 0.1453 | 0.2477 |
| Average | 0.7810 | 0.8376 | 0.6770 | 0.9625 | 0.1453 | 0.2479 | Maximum | 0.8377 | 0.9626 | 0.2481 |
|
|
(b) |
| Specific calculated parameters, % | | | |
| 0.14 | 0.18 | 0.04 |
|
|