Research Article
New Measurement Method and Uncertainty Estimation for Plate Dimensions and Surface Quality
Table 9
The classification results of tile third sample using new measurement method in mm.
(a) |
| Test no. | Measured values of , mm | Measured values of , mm | Measured values of , mm | at | at | at | at | at | at |
| 1 | 0.7413 | 0.6448 | 0.6227 | 0.6896 | 0.1307 | 0.1626 | 2 | 0.7403 | 0.6450 | 0.6224 | 0.6895 | 0.1307 | 0.1629 | 3 | 0.7399 | 0.6445 | 0.6212 | 0.6894 | 0.1306 | 0.1627 | 4 | 0.7400 | 0.6448 | 0.6212 | 0.6892 | 0.1309 | 0.1630 | 5 | 0.7392 | 0.6449 | 0.6208 | 0.6883 | 0.1309 | 0.1629 |
| Average | 0.7401 | 0.6448 | 0.6217 | 0.6892 | 0.1308 | 0.1628 | Maximum | 0.7413 | 0.6896 | 0.1630 |
|
|
(b) |
| Specific calculated parameters, %
| | | |
| 0.12 | 0.13 | 0.03 |
|
|