About this Journal Submit a Manuscript Table of Contents
Advances in Materials Science and Engineering
Volume 2014 (2014), Article ID 576052, 7 pages
http://dx.doi.org/10.1155/2014/576052
Research Article

Computational and Simulation Analysis of Pull-Out Fiber Reinforced Concrete

1School of Transportation, Wuhan University of Technology, Wuhan 430070, China
2Binzhou Polytechnic, Binzhou 256603, China

Received 26 November 2013; Revised 15 January 2014; Accepted 16 January 2014; Published 3 April 2014

Academic Editor: Konstantinos I. Tserpes

Copyright © 2014 Xia Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. F. M. Lea, The Chemistry of Cement and Concrete, Edward Arnold, London, UK, 3rd edition, 1976.
  2. H. F. W. Taylor, Cement Chemistry, Thomas Telford, London, UK, 2nd edition, 1998.
  3. B. M. Wang, Y. Zhang, and S. Liu, “Influence of carbon nanofibers on the mechanical performance and microstructure of cement-based materials,” Nanoscience and Nanotechnology Letters, vol. 5, no. 10, pp. 1112–1118, 2013.
  4. Z. S. Metaxa, M. S. Konsta-Gdoutos, and S. P. Shah, “Carbon nanofiber cementitious composites: effect of debulking procedure ondispersion and reinforcing efficiency,” Cement and Concrete Composites, vol. 36, pp. 25–32, 2013.
  5. T. C. Triantafillou, “Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites,” ACI Structural Journal, vol. 95, no. 2, pp. 107–115, 1998. View at Scopus
  6. R. El-Hacha and S. H. Rizkalla, “Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures,” ACI Structural Journal, vol. 101, no. 5, pp. 717–726, 2004. View at Scopus
  7. L. Lam and J. G. Teng, “Strength models for fiber-reinforced plastic-confined concrete,” Journal of Structural Engineering, vol. 128, no. 5, pp. 612–623, 2002. View at Publisher · View at Google Scholar · View at Scopus
  8. L. Koutas and T. C. Triantafillou, “Use of anchors in shear strengthening of reinforced concrete T-beams with FRP,” Journal of Composites for Construction, vol. 17, no. 1, pp. 101–107, 2013.
  9. H. Wang and A. Belarbi, “Ductility characteristics of fiber-reinforced-concrete beams reinforced with FRP rebars,” Construction and Building Materials, vol. 25, no. 5, pp. 2391–2401, 2011. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Ma, H. Li, and Z. Duan, “Repair effects and acoustic emission technique-based fracture evaluation for predamaged concrete columns confined with fiber-reinforced polymers,” Journal of Composites for Construction, vol. 16, no. 6, pp. 626–639, 2012.
  11. H.-T. Hu, F.-M. Lin, and Y.-Y. Jan, “Nonlinear finite element analysis of reinforced concrete beams strengthened by fiber-reinforced plastics,” Composite Structures, vol. 63, no. 3-4, pp. 271–281, 2004. View at Publisher · View at Google Scholar · View at Scopus
  12. A. M. Malek and H. Saadatmanesh, “Analytical study of reinforced concrete beams strengthened with web-bonded fiber reinforced plastic plates or fabrics,” ACI Structural Journal, vol. 95, no. 3, pp. 343–352, 1998. View at Scopus
  13. J. W. Tedesco, J. M. Stallings, and M. El-Mihilmy, “Finite element method analysis of a concrete bridge repaired with fiber reinforced plastic laminates,” Computers and Structures, vol. 72, no. 1, pp. 379–407, 1999. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Cosenza, G. Manfredi, and R. Realfonzo, “Behavior and modeling of bond of FRP rebars to concrete,” Journal of Composites for Construction, vol. 1, no. 2, pp. 40–51, 1997. View at Scopus
  15. C. Na and H.-G. Kwak, “A numerical tension-stiffening model for ultra high strength fiber-reinforced concrete beams,” Computers and Concrete, vol. 8, no. 1, pp. 1–22, 2011. View at Scopus
  16. H. Hu and W. C. Schnobrich, “Constitutive modeling of concrete by using nonassociated plasticity,” Journal of Materials in Civil Engineering, vol. 1, no. 4, pp. 199–216, 1989.
  17. B. Ferracuti, M. Savoia, and C. Mazzotti, “A numerical model for FRP-concrete delamination,” Composites B: Engineering, vol. 37, no. 4-5, pp. 356–364, 2006. View at Publisher · View at Google Scholar · View at Scopus
  18. S. K. Padmarajaiah and A. Ramaswamy, “A finite element assessment of flexural strength of prestressed concrete beams with fiber reinforcement,” Cement and Concrete Composites, vol. 24, no. 2, pp. 229–241, 2002. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Samaan, A. Mirmiran, and M. Shahawy, “Model of concrete confined by fiber composites,” Journal of Structural Engineering, vol. 124, no. 9, pp. 1025–1031, 1998. View at Scopus
  20. X. Z. Lu, L. P. Ye, J. G. Teng, and J. J. Jiang, “Meso-scale finite element model for FRP sheets/plates bonded to concrete,” Engineering Structures, vol. 27, no. 4, pp. 564–575, 2005. View at Publisher · View at Google Scholar · View at Scopus
  21. J. F. Chen and J. G. Teng, “Anchorage strength models for FRP and steel plates bonded to concrete,” Journal of Structural Engineering, vol. 127, no. 7, pp. 784–791, 2001. View at Publisher · View at Google Scholar · View at Scopus
  22. J. G. Teng, J. W. Zhang, and S. T. Smith, “Interfacial stresses in reinforced concrete beams bonded with a soffit plate: a finite element study,” Construction and Building Materials, vol. 16, no. 1, pp. 1–14, 2002. View at Publisher · View at Google Scholar · View at Scopus
  23. R. S. Y. Wong and F. J. Vecchio, “Towards modeling of reinforced concrete members with externally bonded fiber-reinforced polymer composites,” ACI Structural Journal, vol. 100, no. 1, pp. 47–55, 2003. View at Scopus
  24. X. Z. Lu and J. J. Jiang, “A concrete constitutive relationship with various damage models,” China Civil Engineering Journal, vol. 36, no. 11, pp. 70–74, 2003.
  25. L. Skarzynśki and J. Tejchman, “Determination of representative volume element in concrete under tensile deformation,” Computers and Concrete, vol. 9, no. 1, pp. 35–50, 2012. View at Scopus
  26. X. Z. Lu, J. G. Teng, L. P. Ye, and J. J. Jiang, “Bond-slip models for FRP sheets/plates bonded to concrete,” Engineering Structures, vol. 27, no. 6, pp. 920–937, 2005. View at Publisher · View at Google Scholar · View at Scopus
  27. L. Lam and J. G. Teng, “Strength models for fiber-reinforced plastic-confined concrete,” Journal of Structural Engineering, vol. 128, no. 5, pp. 612–623, 2002. View at Publisher · View at Google Scholar · View at Scopus
  28. M. N. Youssef, M. Q. Feng, and A. S. Mosallam, “Stress-strain model for concrete confined by FRP composites,” Composites B: Engineering, vol. 38, no. 5-6, pp. 614–628, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. T. Jiang and J. G. Teng, “Analysis-oriented stress-strain models for FRP-confined concrete,” Engineering Structures, vol. 29, no. 11, pp. 2968–2986, 2007. View at Publisher · View at Google Scholar · View at Scopus
  30. M. R. Spoelstra and G. Monti, “FRP-confined concrete model,” Journal of Composites for Construction, vol. 3, no. 3, pp. 143–150, 1999. View at Publisher · View at Google Scholar · View at Scopus
  31. Z. M. Wu, J. J. Zheng, and X. Wu, “Modeling of debonding and fracture process of FRP-strengthened concrete beams via fracture mechanics approach,” Journal of Reinforced Plastics and Composites, vol. 32, no. 28, pp. 1–13., 2013.
  32. K. Benzarti, F. Freddi, and M. Frémond, “A damage model to predict the durability of bonded assemblies. Part I: debonding behavior of FRP strengthened concrete structures,” Construction and Building Materials, vol. 25, no. 2, pp. 547–555, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. C. Carloni, K. V. Subramaniam, M. Savoia, and C. Mazzotti, “Experimental determination of FRP-concrete cohesive interface properties under fatigue loading,” Composite Structures, vol. 94, no. 4, pp. 1288–1296, 2012. View at Publisher · View at Google Scholar · View at Scopus
  34. X. Zhang, H. Li, X. Feng, et al., “Mechanical behavior of steel-encased concrete filled prefabricated FRP tubes short column under axial compression based on ABAQUS,” Applied Mechanics and Materials, vol. 256–259, no. 12, pp. 749–753, 2012.
  35. J. Song, H. Yan, Z. Guo, et al., “Nonlinear finite element analysis and simulation of nacelle-cover of MW-class wind turbine based on ABAQUS,” Machine Building & Automation, vol. 39, no. 6, pp. 122–125, 2010.
  36. C. E. Todeschini, A. C. Bianchini, and C. E. Kesler, “Behavior of concrete columns reinforced with high strength steels,” Aci Materials Journal, vol. 61, pp. 701–716, 1964.
  37. J. F. Chen and Y. Tao, Finite Element Modeling of FRP-to-Concrete Bond Behavior Using the Concrete Damage Plasticity Theory Combined with a plastic degradation Model, Springer, Beijing, China, 5th edition, 2010.
  38. R. Seracino, N. M. Jones, M. S. M. Ali, M. W. Page, and D. J. Oehlers, “Bond strength of near-surface mounted FRP strip-to-concrete joints,” Journal of Composites for Construction, vol. 11, no. 4, pp. 401–409, 2007. View at Publisher · View at Google Scholar · View at Scopus
  39. R. Seracino, D. J. Oehlers, and S. Raizal, “Towards a generic model of the intermediate crack debonding resistance of plates adhesively bonded to concrete,” in Proceedings of the International Symposium on bond behavior of FRP in Structures, International Institute of FRP in Construction, 2005.
  40. G. V. G. Rao, P. Mahajan, and N. Bhatnagar, “Micro-mechanical modeling of machining of FRP composites-cutting force analysis,” Composites Science and Technology, vol. 67, no. 3-4, pp. 579–593, 2007. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Lesani, M. R. Bahaari, and M. M. Shokrieh, “Numerical investigation of FRP-strengthened tubular T-joints under axial compressive loads,” Composite Structures, vol. 100, pp. 71–78, 2013.