Experimental and Numerical Investigation of the Effect of Process Conditions on Residual Wall Thickness and Cooling and Surface Characteristics of Water-Assisted Injection Molded Hollow Products

Table 3

Experiment design for WAIM.

Case		Melt temperature°C]	Melt temperature °C]	Water pressure MPa]	Delay time s]
Melt temperature °C]	Low	210	45	4.5	2.5
	Medium	230
	High	250
Melt temperature °C]	Low	230	35	4.5	2.5
	Medium		45
	High		55
Water pressure MPa]	Low	230	45	3.5	2.5
	Medium			4.5
	High			5.5
Delay time s]	Low	230	45	4.5	0.5
	Medium				2.5
	High				4.5