Research Article
Evaluation of Sintering Behavior of Premix Al-Zn-Mg-Cu Alloy Powder
Table 2
Elemental analysis of Alumix 431D after T6 heat treatment from Figure
9(b).
| Number | Al (wt%) | Zn (wt%) | Mg (wt%) | Cu (wt%) | O (wt%) |
| 1 | 79.65 | 5.54 | 1.82 | 1.57 | 0.35 | 2 | 78.96 | 5.88 | 1.91 | 1.74 | 0.34 | 3 | 76.66 | 5.81 | 2.42 | 1.83 | 0.85 | 4 | 78.1 | 5.68 | 1.88 | 1.69 | 0.32 | 5 | 78.25 | 5.76 | 1.9 | 1.74 | 0.32 |
|
|