Research Article
Multiobjective Optimization of Turning Cutting Parameters for J-Steel Material
Table 2
Design variables values in five-level full-factorial matrix.
| Level | Cutting speed (m/min) | Depth of cut (mm) | Feed rate (mm/rev) |
| 1 | 150 | 0.10 | 0.050 | 2 | 175 | 0.15 | 0.075 | 3 | 200 | 0.20 | 0.100 | 4 | 250 | 0.30 | 0.150 | 5 | 300 | 0.40 | 0.200 |
|
|