Research Article
Molding Properties of Inconel 718 Feedstocks Used in Low-Pressure Powder Injection Molding
Table 2
Rheological parameters of feedstocks.
| Feedstock | Temperature (°C) | (Pa·s) | | (kJ/mol) |
| 40PW | 70 | 0.29 | 0.59 | 24.5 | 80 | 0.27 | 0.60 | 24.5 | 90 | 0.20 | 0.57 | 24.5 | 100 | 0.15 | 0.54 | 24.5 |
| 40BW | 70 | 0.61 | 0.56 | 28.3 | 80 | 0.45 | 0.52 | 28.3 | 90 | 0.33 | 0.51 | 28.3 | 100 | 0.28 | 0.57 | 28.3 |
| 35PW-5SA | 70 | 0.14 | 0.41 | 29.5 | 80 | 0.11 | 0.39 | 29.5 | 90 | 0.08 | 0.37 | 29.5 | 100 | 0.06 | 0.36 | 29.5 |
| 35PW-5EVA | 70 | 6.11 | 0.92 | 25.8 | 80 | 4.59 | 0.91 | 25.8 | 90 | 3.67 | 0.91 | 25.8 | 100 | 2.94 | 0.90 | 25.8 |
|
|