Microstructure of Al-Si Slurry Coatings on Austenitic High-Temperature Creep Resisting Cast Steel

<div>Microstructure (BEI) of Al-Si coating on sample (a) number 16 (surface after grinding), (b) with a rough cast surface (technological parameters in both cases: 900°C, 7.5 h, Al/Si = 9; central point of the experiment).</div>

Advances in Materials Science and Engineering

fig2

Figure 2

Figure 2: Microstructure of Al-Si Slurry Coatings on Austenitic High-Temperature Creep Resisting Cast Steel 