- About this Journal ·
- Abstracting and Indexing ·
- Advance Access ·
- Aims and Scope ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
Advances in Optical Technologies
Volume 2012 (2012), Article ID 976868, 8 pages
Fabrication and Evaluation of Large Area Mo/Si Soft X-Ray Multilayer Mirrors at Indus SR Facilities
X-ray Optics Section, Indus Synchrotrons Utilization Division, Raja Ramanna Centre for Advanced Technology,
Received 30 April 2012; Accepted 6 July 2012
Academic Editor: Yong Zhao
Copyright © 2012 P. N. Rao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- E. Spiller, Soft X-Ray Optics, SPIE, Bellingham, Wash, USA, 1994.
- D. G. Stearns, R. S. Rosen, and S. P. Vernon, “Multilayer mirror technology for soft-X-ray projection lithography,” Applied Optics, vol. 32, no. 34, pp. 6952–6960, 1993.
- H. Takenaka, T. Kawamura, T. Haga, H. Kinoshita, and Y. Ishii, “Evaluation of large-area Mo/Si multilayer soft X-ray mirrors fabricated by RF magnetron sputtering,” Japanese Journal of Applied Physics, Part 1, vol. 34, no. 9 A, pp. 5027–5031, 1995.
- D. L. Windit and W. K. Waskiewicz, “Multilayer facilities required for extreme-ultraviolet lithography,” Journal of Vacuum Science and Technology B, vol. 12, no. 6, pp. 3826–3832, 1994.
- C. Montcalm, R. F. Grabner, R. M. Hudyma et al., “Atomic-precision multilayer coating of the first set of optics for an extreme-ultraviolet lithography prototype system,” Applied Optics, vol. 41, no. 16, pp. 3262–3269, 2002.
- J. B. Kortright, E. M. Gullikson, and P. E. Denham, “Masked deposition techniques for achieving multilayer period variations required for short-wavelength (68-Å) soft-X-ray imaging optics,” Applied Optics, vol. 32, no. 34, pp. 6961–6968, 1993.
- C. K. Malek, T. Moreno, R. Barchewitz, R. Rivoira, and Y. Lepêtre, “Performances of large multilayer mirrors for the 0.5–1.5 nm range,” Review of Scientific Instruments, vol. 63, no. 9, pp. 4102–4107, 1992.
- J. F. MacKay, D. W. Pearson, B. E. Nelms, P. M. DeLuca Jr., M. N. Gould, and M. G. Lagally, “A double mirror W/C multilayer monochromator for radiation biology applications,” Medical Physics, vol. 25, no. 5, pp. 773–779, 1998.
- Ch. Morawe and J. C. Peffen, “Thickness control of large area X-ray multilayers,” in Advances in X-Ray/EUV Optics and Components IV, vol. 7448 of Proceedings of SPIE, San Diego, Calif, USA, August 2009, 74480H.
- K. D. Joensen, P. Hoghoj, F. E. Christensen et al., “Multilayered supermirror structures for hard x-ray synchrotron and astrophysics instrumentation,” in Multilayer and Grazing Incidence X-Ray/EUV Optics II, vol. 2011 of Proceedings of SPIE, pp. 360–372, July 1993.
- L. Golub, G. Nystrom, E. Spiller, and J. Wilczynski, “Construction of multilayered X-ray telescope for solar coronal studies from space,” in Application of Thin-Film Multilayered Structures to Figured X-ray Optics, vol. 563 of Proceedings of SPIE, pp. 266–275, 1985.
- E. Spiller and L. Golub, “Fabrication and testing of large area multilayer coated x-ray optics,” Applied Optics, vol. 28, no. 14, pp. 2969–2974, 1989.
- M. Wohlschlägel, T. U. Schülli, B. Lantz, and U. Welzel, “Application of a single-reflection collimating multilayer optic for X-ray diffraction experiments employing parallel-beam geometry,” Journal of Applied Crystallography, vol. 41, no. 1, pp. 124–133, 2008.
- P. Gawlitza, S. Braun, S. Lipfert, and A. Lesen, “Ion beam sputter deposition of x-ray multilayer optics on large areas,” in Advances in X-Ray/EUV Optics, Components, and Applications, vol. 6317 of Proceedings of SPIE, San Diego, Calif, USA, August 2006, 63170G.
- H. Tsuruta, S. Brennan, Z. U. Rek, T. C. Irving, W. H. Tompkins, and K. O. Hodgson, “A wide-bandpass multilayer monochromator for biological small-angle scattering and fiber diffraction studies,” Journal of Applied Crystallography, vol. 31, no. 5, pp. 672–682, 1998.
- R. Dietsch, Th. Holz, D. Weißbach, and R. Scholz, “Large area PLD of nanometer-multilayers,” Applied Surface Science, vol. 197-198, pp. 169–174, 2002.
- M. Nayak, P. N. Rao, and G. S. Lodha, “Magnetron sputtering based X-ray multilayer deposition system at Indus SR facility,” Asian Journal of Physics, vol. 19, no. 2, pp. 1–14.
- R. V. Nandedkar, K. J. S. Sawhney, G. S. Lodha et al., “First results on the reflectometry beamline on Indus-1,” Current Science, vol. 82, no. 3, pp. 298–304, 2002.
- L. G. Parratt, “Surface studies of solids by total reflection of X-rays,” Physical Review, vol. 95, no. 2, pp. 359–369, 1954.
- Y. G. Shen, Y. W. Mai, Q. C. Zhang, D. R. McKenzie, W. D. McFall, and W. E. McBride, “Residual stress, microstructure, and structure of tungsten thin films deposited by magnetron sputtering,” Journal of Applied Physics, vol. 87, no. 1, pp. 177–187, 2000.
- R. R. Kola, D. L. Windt, W. K. Waskiewicz et al., “Stress relaxation in Mo/Si multilayer structures,” Applied Physics Letters, vol. 60, no. 25, pp. 3120–3122, 1992.
- S. Yulin, T. Feigl, T. Kuhlmann et al., “Interlayer transition zones in Mo/Si superlattices,” Journal of Applied Physics, vol. 92, no. 3, pp. 1216–1220, 2002.
- R. F. Bunshah, Handbook of Deposition Technologies for Films and Coatings, chapter 5, Noyes Publications, 1994.
- E. Louis, A. E. Yakshin, P. C. Gorts et al., “Progress in Mo/Si multilayer coating technology for EUVL optics,” in Emerging Lithographic Technologies IV, vol. 3997 of Proceeding of SPIE, pp. 406–411, February 2000.