About this Journal Submit a Manuscript Table of Contents
Advances in Power Electronics
Volume 2012 (2012), Article ID 327186, 9 pages
http://dx.doi.org/10.1155/2012/327186
Research Article

Comparative Studies of Different Control Strategies of a Dynamic Voltage Restorer Based on Matrix Converter

School of Electrical & Computer Engineering, University of Shiraz, Shiraz 7134851151, Iran

Received 17 May 2012; Accepted 10 September 2012

Academic Editor: Pavol Bauer

Copyright © 2012 Amin Shabanpour and Ali Reza Seifi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. D. Sabin, “An assessment of distribution system power quality,” Tech. Rep. TR-106294-V2, Electric Power Research Institute, Palo Alto, Calif, USA, 1996.
  2. IEEE STD 1159–1995, “IEEE Recommended Practice for Monitoring Electric Power Quality”.
  3. J. G. Nielsen and F. Blaabjerg, “A detailed comparison of system topologies for dynamic voltage restorers,” IEEE Transactions on Industry Applications, vol. 41, no. 5, pp. 1272–1280, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Venturini and A. Alesina, “Generalised transformer: a new bidirectional, sinusoidal waveform frequency converter with continuously adjustable input power factor,” in Proceedinds of the IEEE Power Electronics Specialists Conference (PESC '80), pp. 242–252, Atlanta, Ga, USA, June 1980. View at Scopus
  5. D. Casadei, G. Serra, A. Tani, and L. Zarri, “Matrix converter modulation strategies: a new general approach based on space-vector representation of the switch state,” IEEE Transactions on Industrial Electronics, vol. 49, no. 2, pp. 370–381, 2002. View at Publisher · View at Google Scholar · View at Scopus
  6. B. Wang and G. Venkataramanan, “Dynamic voltage restorer utilizing a matrix converter and flywheel energy storage,” in Proceedings of the IEEE Industry Applications Conference 42nd IAS Annual Meeting, pp. 208–215, September 2007. View at Scopus
  7. E. Babaei and M. F. Kangarlu, “A new topology for dynamic voltage restorers without dc link,” in Proceedinds of the IEEE Symposium on Industrial Electronics & Applications (ISIEA '09), pp. 1016–1021, October 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. J. M. Lozano, J. M. Ramirez, and R. E. Correa, “A novel dynamic voltage restorer based on matrix converters,” in Proceedings of the IEEE Proceedings Modern Electric Power Systems (MEPS '10), Wroclaw, Poland, 2010, paper 15.2.
  9. M. Jazayeri and H. Abdollahzadeh, “A novel DVR control system design for compensating all types of voltage sags based on pre-fault method,” European Journal of Scientific Research, vol. 33, no. 1, pp. 70–85, 2009. View at Scopus
  10. S. Zhe, G. ChunLin, X. YongHai, X. XiangNing, L. Yingying, and T. Shun, “A new analysis method for compensation strategy of DVR and minimum energy control,” in Proceedings of the 5th IEEE Conference on Industrial Electronics and Applications (ICIEA '10), pp. 1321–1325, June 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. J. G. Nielsen, F. Blaabjerg, and N. Mohan, “Control strategies for dynamic voltage restorer compensating voltage sags with phase jump,” in Proceedings of the16th Annual IEEE Applied Power Electronics Conference and Exposition (APEC '01), vol. 2, pp. 1267–1273, March 2001. View at Scopus
  12. R. Strzelecki and G. Benysek, “Control strategies and comparison of the dynamic voltage restorer,” in Proceedings of the 6th International Conference on Power Quality and Supply Reliability, pp. 79–82, August 2008. View at Publisher · View at Google Scholar · View at Scopus