- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
ElectroComponent Science and Technology
Volume 5 (1978), Issue 1, Pages 41-43
doi:10.1155/APEC.5.41
Thin Resistive Thick-Film Layers Based on Precious Metal Resinate/Glass Systems
N. V. Philips, Eindhoven, The Netherlands
Received 16 August 1977
Copyright © 1978 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Abstract
This paper describes the preparation and results obtained with a ruthenium-resinate/glass resistive system prepared by firing on to a 96% alumina substrate. The results have been compared with a gold/rhodium-resinate/glass system. It is found in the ruthenium system that the particle size is about 200 Å and because of this, conduction occurs at a very low volume percent conduction phase. Temperature Coefficient of Resistance behaviour of the ruthenium based system is still anomalous.