Journal Menu
- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Active and Passive Electronic Components
Volume 15 (1993), Issue 3-4, Pages 155-163
doi:10.1155/1993/80269
The Properties of Screen Printed (Bi,Pb)-Sr-Ca-Cu-O Thick Films Based On Decomposed Oxalate Powders
Microelectronics and Material Physics Laboratories, University of Oulu, Oulu SF-90570, Finland
Received 15 November 1992; Accepted 16 December 1992
Copyright © 1993 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
J. Hagberg, “The Properties of Screen Printed (Bi,Pb)-Sr-Ca-Cu-O Thick Films Based On Decomposed Oxalate Powders,” Active and Passive Electronic Components, vol. 15, no. 3-4, pp. 155-163, 1993. doi:10.1155/1993/80269