Table of Contents for Year 2011 [17 articles]

• Wear-Related Phenomena in Advanced Materials, Alexander Tsouknidas, Luca Settineri, Pedro Arrazola, and Nikolaos Michailidis
  Volume 2011 (2011), Article ID 842686, 2 pages
• Development of New PM Iron-Based Materials for Self-Lubricating Bearings, Cristina Teisanu and Stefan Gheorghe
  Volume 2011 (2011), Article ID 248037, 11 pages
• A Characterization Method for Al Recovery from Dross Based on Compression at Elevated Temperatures, S. Maropoulos, D. Kountouras, X. Voulgaraki, S. Papanikolaou, and I. Sanaidis
  Volume 2011 (2011), Article ID 395716, 5 pages
• Friction of Polymers Sliding on Smooth Surfaces, Virginio Quaglini and Paolo Dubini
  Volume 2011 (2011), Article ID 178943, 8 pages
• Model of Fracture, Friction, and Wear Phenomena of Porous Iron, A. A. Shatsov, I. V. Ryaposov, and D. M. Larinin
  Volume 2011 (2011), Article ID 810254, 16 pages
• Characterization of Tool Wear in High-Speed Milling of Hardened Powder Metallurgical Steels, Fritz Klocke, Kristian Arntz, Gustavo Francisco Cabral, Martin Stolorz, and Marc Busch
  Volume 2011 (2011), Article ID 906481, 13 pages
• Tribological Effects of Mineral-Oil Lubricant Contamination with Biofuels: A Pin-on-Disk Tribometry and Wear Study, S. M. Shanta, G. J. Molina, and V. Soloiu
  Volume 2011 (2011), Article ID 820795, 7 pages
• Dynamic Mechanical Properties of Oxide Films Formed on Metallic Surfaces as Measured Using a Tribological Approach at High Temperature, Yoshinori Isomoto Oka and Toshinori Tsumura
  Volume 2011 (2011), Article ID 974065, 12 pages
• Wear Behavior and Its Correlation with Mechanical Properties of TiB₂ Reinforced Aluminium-Based Composites, N. B. Dhokey and K. K. Rane
  Volume 2011 (2011), Article ID 837469, 8 pages
• Combustion Synthesis of TiC-TiB₂-Based Cermets from Elemental Powders, Jun Yu, Kiyotaka Matsuura, and Munekazu Ohno
  Volume 2011 (2011), Article ID 105258, 8 pages
• Friction Induced Wear of Rapid Prototyping Generated Materials: A Review, A. Tsouknidas
  Volume 2011 (2011), Article ID 746270, 7 pages
• The Effects of Wear upon the Axial Profile of a Grinding Wheel in the Construction of Innovative Grinding Wheels for Internal Cylindrical Grinding, K. Nadolny and B. Słowiński
  Volume 2011 (2011), Article ID 516202, 11 pages
• Integrated Approach for a Knowledge-Based Process Layout for Simultaneous 5-Axis Milling of Advanced Materials, F. Klocke, T. Bergs, M. Busch, L. Rohde, M. Witty, and G. F. Cabral
  Volume 2011 (2011), Article ID 742360, 7 pages
• Friction Experiments for Dynamical Coefficient Measurement, J. J. Arnoux, G. Sutter, G. List, and A. Molinari
  Volume 2011 (2011), Article ID 613581, 6 pages
• Transfer Layers: A Comparison across SWNTs, DWNTs, Graphite, and an Ionic Fluid, Randy L. Vander Wal, Kenneth W. Street Jr., and Kazuhisa Miyoshi
  Volume 2011 (2011), Article ID 929642, 6 pages
• Sensing and Identification of Nonlinear Dynamics of Slider with Clearance in Sub-5 Nanometer Regime, Gang Sheng
  Volume 2011 (2011), Article ID 282839, 11 pages
• Running Characteristics of Aerodynamic Bearing with Self-Lifting Capability at Low Rotational Speed, Tadeusz Adam Stolarski
  Volume 2011 (2011), Article ID 973740, 10 pages