Formation of Composite Surface during Friction Surfacing of Steel with Aluminium

Table 1

Processing parameters for various samples and quality of the deposition.

Trial no.	Tool travel speed (mm/min)	Load (kN)	Spindle speed (rpm)	Quality of the deposition
T1	35	3	200	Powdery deposition,
T2	35	3	400	Deposition better than T1, still powdery
T3	35	4	200	Discontinuous and varying width.
T4	35	4	400	Good (uniform, continuous) deposition
T5	35	5	200	Continuous, varying width
T6	35	5	400	Good deposition, Width more than T4