Journal Menu
- About this Journal
- Abstracting and Indexing
- Aims and Scope
- Article Processing Charges
- Articles in Press
- Author Guidelines
- Bibliographic Information
- Citations to this Journal
- Contact Information
- Editorial Board
- Editorial Workflow
- Free eTOC Alerts
- Publication Ethics
- Reviewers Acknowledgment
- Submit a Manuscript
- Subscription Information
- Table of Contents
Advances in Tribology
Volume 2012 (2012), Article ID 723919, 12 pages
doi:10.1155/2012/723919
Research Article
Surface Layer Properties after Successive EDM or EDA and Then Superficial Roto-Peen Machining
Institute of Manufacturing Technology, Warsaw University of Technology, 02-524 Warsaw, Poland
Received 19 December 2011; Revised 3 April 2012; Accepted 3 April 2012
Academic Editor: J. Paulo Davim
Copyright © 2012 Agnieszka Dmowska et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
How to Cite this Article
Agnieszka Dmowska, Bogdan Nowicki, and Anna Podolak-Lejtas, “Surface Layer Properties after Successive EDM or EDA and Then Superficial Roto-Peen Machining,” Advances in Tribology, vol. 2012, Article ID 723919, 12 pages, 2012. doi:10.1155/2012/723919