About this Journal Submit a Manuscript Table of Contents
Advances in Tribology
Volume 2013 (2013), Article ID 492858, 16 pages
http://dx.doi.org/10.1155/2013/492858
Research Article

Effect of Nitrogen Implantation on Metal Transfer during Sliding Wear under Ambient Conditions

Department of Chemical, Materials and Biomolecular Engineering, Institute of Materials Science, University of CT, Storrs, CT 06269, USA

Received 21 September 2012; Accepted 3 December 2012

Academic Editor: Patrick De Baets

Copyright © 2013 Luke Autry and Harris Marcus. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. Wallin, An investigation of friction graphs ranking ability regarding the galling phenomenon in dry SOFS contact [Thesis], Faculty of Technology and Science Department of Material Science Karlstad University.
  2. J. T. Burwell and C. D. Strang, “Metallic Wear,” Proceedings of the Royal Society of London A, vol. 212, Mathematical and Physical Sciences, no. 1111, pp. 470–477, 1952.
  3. ASTM G98-02, 2009, Standard test method for galling resistance of materials.
  4. T. Sasada and S. Norose, “Formation and growth of wear particles through mutual material transfer,” in Proceedings of the JSLE-ASLE International Lubrication Conference, pp. 82–91, American Elsevier Publishing, New York, NY, USA, 1976.
  5. A. Hase and H. Mishina, “Wear elements generated in the elementary process of wear,” Tribology International, vol. 42, no. 11-12, pp. 1684–1690, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Gåård, P. Krakhmalev, and J. Bergström, “Wear mechanisms in galling: cold work tool materials sliding against high-strength carbon steel sheets,” Tribology Letters, vol. 33, no. 1, pp. 45–53, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. S. R. Hummel and B. Partlow, “Comparison of threshold galling results from two testing methods,” Tribology International, vol. 37, no. 4, pp. 291–295, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. S. R. Hummel, “Development of a galling resistance test method with a uniform stress distribution,” Tribology International, vol. 41, no. 3, pp. 175–180, 2008. View at Publisher · View at Google Scholar · View at Scopus
  9. U. Wiklund and I. M. Hutchings, “Investigation of surface treatments for galling protection of titanium alloys,” Wear, vol. 251, no. 1–12, pp. 1034–1041, 2001. View at Scopus
  10. S. R. Hummel, “An application of frictional criteria for determining galling thresholds in line contact tests,” Tribology International, vol. 35, no. 12, pp. 801–807, 2002. View at Publisher · View at Google Scholar · View at Scopus
  11. I. L. Singer, “Surface analysis, ion implantation and tribological processes affecting steels,” Applied Surface Science, vol. 18, no. 1-2, pp. 28–62, 1984. View at Scopus
  12. J. K. Hirvonen, C. A. Carosella, R. A. Kant, I. Singer, R. Vardiman, and B. B. Rath, “Improvement of metal properties by ion implantation,” Thin Solid Films, vol. 63, no. 1, pp. 5–10, 1979. View at Scopus
  13. T. Fujihana, Y. Okabe, and M. Iwaki, “Effects of implantation temperature on the hardness of iron nitrides formed with high nitrogen dose,” Nuclear Instruments and Methods in Physics Research Section B, vol. 39, no. 1–4, pp. 548–551, 1989. View at Scopus
  14. T. Fujihana, A. Sekiguchi, Y. Okabe, K. Takahashi, and M. Iwaki, “Effects of room temperature carbon, nitrogen and oxygen implantation on the surface hardening and corrosion protection of iron,” Surface and Coatings Technology, vol. 51, no. 1–3, pp. 19–23, 1992. View at Scopus
  15. H. Dimigen, K. Kobs, R. Leutenecker, H. Ryssel, and P. Eichinger, “Wear resistance of nitrogen-implanted steels,” Materials Science and Engineering, vol. 69, no. 1, pp. 181–190, 1985. View at Scopus
  16. A. A. Youssef, P. Budzynski, J. Filiks, A. P. Kobzev, and J. Sielanko, “Improvement of wear and hardness of steel by nitrogen implantation,” Vacuum, vol. 77, no. 1, pp. 37–45, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. W. C. Oliver, R. Hutchings, and J. B. Pethica, “The wear behavior of nitrogen-implanted metals,” Metallurgical and Materials Transactions A, vol. 15, no. 12, pp. 2221–2229, 1984. View at Scopus
  18. P. Tarkowski, P. Budzynski, and W. Kasietczuk, “Adhesive character of wear processes in nitrogen-implanted iron,” Vacuum, vol. 78, no. 2–4, pp. 679–683, 2005. View at Publisher · View at Google Scholar · View at Scopus
  19. R. Wei, P. J. Wilbur, W. S. Sampath, D. L. Williamson, and J. L. Wang, “Effects of Ion implantation conditions on the tribology of ferrous surfaces,” Tribology, vol. 113, pp. 166–173, 1991. View at Publisher · View at Google Scholar
  20. I. M. Feng, “Metal transfer and wear,” Journal of Applied Physics, vol. 23, no. 9, pp. 1011–1019, 1952. View at Publisher · View at Google Scholar · View at Scopus
  21. D. A. Rigney, “The roles of hardness in the sliding behavior of materials,” Wear, vol. 175, no. 1-2, pp. 63–69, 1994. View at Scopus
  22. C. C. Viáfara and A. Sinatora, “Influence of hardness of the harder body on wear regime transition in a sliding pair of steels,” Wear, vol. 267, no. 1–4, pp. 425–432, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. D. W. Borland and S. Bian, “Unlubricated sliding wear of steels: towards an alternative wear equation,” Wear, vol. 209, no. 1-2, pp. 171–178, 1997. View at Scopus
  24. D. Tabor, “Junction growth in metallic friction: the role of combined stresses and surface contamination,” Proceedings of the Royal Society of London A, vol. 251, no. 1266, pp. 378–393, 1959. View at Publisher · View at Google Scholar
  25. D. Rafaja, “X-ray diffraction and X-ray reflectivity applied to the investigation of thin films,” Advances in Solid State Physics, vol. 41, pp. 275–286, 2001. View at Publisher · View at Google Scholar
  26. M. Kopcewicz and J. Jagielski, “Phase transformations in nitrogen-implanted α-iron,” Journal of Applied Physics, vol. 71, no. 9, pp. 4217–4226, 1992. View at Publisher · View at Google Scholar
  27. A. A. Youssef, P. Budzynski, J. Filiks, A. P. Kobzev, and J. Sielanko, “Improvement of wear and hardness of steel by nitrogen implantation,” Vacuum, vol. 77, no. 1, pp. 37–45, 2004. View at Publisher · View at Google Scholar · View at Scopus
  28. G. Bhargava, I. Gouzman, C. M. Chun, T. A. Ramanarayanan, and S. L. Bernasek, “Characterization of the “native” surface thin film on pure polycrystalline iron: a high resolution XPS and TEM study,” Applied Surface Science, vol. 253, no. 9, pp. 4322–4329, 2007. View at Publisher · View at Google Scholar · View at Scopus
  29. N. P. Suh, N. Saka, and S. Jahanmir, “Implications of the delamination theory on wear minimization,” Wear, vol. 44, no. 1, pp. 127–134, 1977. View at Scopus
  30. T. Kayaba, K. Kato, and K. Hokkirigawa, “Theoretical analysis of the plastic yielding of a hard asperity sliding on a soft flat surface,” Wear, vol. 87, no. 2, pp. 151–161, 1983. View at Scopus
  31. M. Fishkis, “Metal transfer in the sliding process,” Wear, vol. 127, no. 1, pp. 101–110, 1988. View at Scopus
  32. R. L. Jackson and I. Green, “A finite element study of elasto-plastic hemispherical contact against a rigid flat,” Journal of Tribology, vol. 127, no. 2, pp. 343–354, 2005. View at Publisher · View at Google Scholar · View at Scopus
  33. L. Kogut and I. Etsion, “A finite element based elastic-plastic model for the contact of rough surfaces,” Tribology Transactions, vol. 46, no. 3, pp. 383–390, 2003. View at Scopus
  34. M. Antler, “Processes of metal transfer and wear,” Wear, vol. 7, no. 2, pp. 181–203, 1964. View at Scopus
  35. M. Antler, “Wear, friction, and electrical noise phenomena in severe sliding systems,” ASLE Transactions, vol. 5, no. 2, pp. 297–307, 1962. View at Publisher · View at Google Scholar
  36. A. D. Berman, W. A. Ducker, and J. N. Israelachvili, “Origin and characterization of different stick-slip friction mechanisms,” Langmuir, vol. 12, no. 19, pp. 4559–4562, 1996. View at Scopus
  37. T. Sasada, M. Oike, and N. Emori, “The effect of abrasive grain size on the transition between abrasive and adhesive wear,” Wear, vol. 97, no. 3, pp. 291–302, 1984. View at Scopus
  38. D. A. Rigney, L. H. Chen, M. G. S. Naylor, and A. R. Rosenfield, “Wear processes in sliding systems,” Wear, vol. 100, no. 1–3, pp. 195–219, 1984. View at Scopus
  39. D. A. Rigney, “Sliding wear of metals,” Annual Review of Materials Science, vol. 18, pp. 141–163, 1988. View at Publisher · View at Google Scholar
  40. J. Jiang, F. H. Stott, and M. M. Stack, “A mathematical model for sliding wear of metals at elevated temperatures,” Wear, vol. 181–183, no. 1, pp. 20–31, 1995. View at Scopus
  41. R. L. Deuis, C. Subramanian, and J. M. Yellup, “Dry sliding wear of aluminium composites—a review,” Composites Science and Technology, vol. 57, no. 4, pp. 415–435, 1997. View at Scopus
  42. I. M. Hutchings, Tribology: Friction and Wear of Engineering Materials, Arnold, London, UK, 1992.
  43. H. J. Kim, A. Emge, S. Karthikeyan, and D. A. Rigney, “Effects of tribooxidation on sliding behavior of aluminum,” Wear, vol. 259, no. 1–6, pp. 501–505, 2005. View at Publisher · View at Google Scholar · View at Scopus
  44. P. Budzynski, A. A. Youssef, Z. Surowiec, and R. Paluch, “Nitrogen ion implantation for improvement of the mechanical surface properties of aluminum,” Vacuum, vol. 81, no. 10, pp. 1154–1158, 2007. View at Publisher · View at Google Scholar · View at Scopus
  45. A. Galerie, M. Caillet, and M. Pons, “Oxidation of ion-implanted metals,” Materials Science and Engineering, vol. 69, no. 2, pp. 329–340, 1985. View at Scopus
  46. G. Dearnaley, “The alteration of oxidation and related properties of metals by ion implantation,” Nuclear Instruments and Methods, vol. 182-183, no. 2, pp. 899–914, 1981. View at Scopus
  47. K. M. Jasim and E. S. Dwarakadasa, “SEM studies of wear debris in Al-Si alloys,” Journal of Materials Science Letters, vol. 8, no. 11, pp. 1285–1287, 1989. View at Publisher · View at Google Scholar · View at Scopus
  48. H. J. Cho, W. J. Wei, H. C. Kao, and C. K. Cheng, “Wear behavior of UHMWPE sliding on artificial hip arthroplasty materials,” Materials Chemistry and Physics, vol. 88, no. 1, pp. 9–16, 2004. View at Publisher · View at Google Scholar · View at Scopus
  49. K. M. Jasim and E. S. Dwarakadasa, “Effect of sliding speed on adhesive wear of binary Al-Si alloys,” Journal of Materials Science Letters, vol. 12, no. 9, pp. 650–653, 1993. View at Publisher · View at Google Scholar · View at Scopus
  50. U. Beerschwinger, T. Albrecht, D. Mathieson, R. L. Reuben, S. J. Yang, and M. Taghizadeh, “Wear at microscopic scales and light loads for MEMS applications,” Wear, vol. 181–183, no. 1, pp. 426–435, 1995. View at Scopus