About this Journal Submit a Manuscript Table of Contents
BioMed Research International
Volume 2013 (2013), Article ID 762132, 15 pages
http://dx.doi.org/10.1155/2013/762132
Review Article

Engineering Parameters in Bioreactor’s Design: A Critical Aspect in Tissue Engineering

1Department of Chemical Engineering, Faculty of Engineering, University of Tehran, P.O. Box 11365-4563, Tehran, Iran
2Department of Biomedical Engineering, Research Center for New Technologies in Life Science Engineering, University of Tehran, P.O. Box 14395-1374, Tehran, Iran
3Institute of Physiology, Medical Faculty, RWTH Aachen University, 52074 Aachen, Germany
4National Cell Bank, Pasteur Institute of Iran, P.O. Box 1316943551, Tehran, Iran
5Gustav Mahlerlaan 3004, 1081 LA Amsterdam, The Netherlands

Received 9 April 2013; Revised 27 June 2013; Accepted 1 July 2013

Academic Editor: Kacey Gribbin Marra

Copyright © 2013 Nasim Salehi-Nik et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. Pörtner, S. Nagel-Heyer, C. Goepfert, P. Adamietz, and N. M. Meenen, “Bioreactor design for tissue engineering,” Journal of Bioscience and Bioengineering, vol. 100, no. 3, pp. 235–245, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. M. Ellis, M. Jarman-Smith, and J. B. Chaudhuri, “Bioreactor systems for tissue engineering: a four-dimensional challenge,” in Bioreactors For Tissue Engineering: Principles, Design and Operation, M. Al-Rubeai and J. B. Chaudhuri, Eds., pp. 1–18, Springer, 2005.
  3. B. G. Sengers, M. Taylor, C. P. Please, and R. O. C. Oreffo, “Computational modelling of cell spreading and tissue regeneration in porous scaffolds,” Biomaterials, vol. 28, no. 10, pp. 1926–1940, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Radisic, H. Park, and G. Vunjak-Novakovic, “Cardiac-tissue engineering,” in Principles of Tissue Engineering, R. Lanza, R. Langer, and J. P. Vacanti, Eds., Academic Press, 3rd edition, 2008.
  5. J. J. Pancrazio, F. Wang, and C. A. Kelley, “Enabling tools for tissue engineering,” Biosensors and Bioelectronics, vol. 22, no. 12, pp. 2803–2811, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. R. I. Freshney, B. Obradovic, W. Grayson, C. Cannizzaro, and G. Vunjak-Novakovic, “Principles of tissue culture and bioreactor design,” in Principles of Tissue Engineering, R. Lanza, R. Langer, and J. P. Vacanti, Eds., Academic Press, 3rd edition, 2008.
  7. Y. I. Yang, D. L. Seol, H. I. Kim, M. H. Cho, and S. J. Lee, “Continuous perfusion culture for generation of functional tissue-engineered soft tissues,” Current Applied Physics, vol. 7, no. 1, pp. e80–e84, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. R. Pörtner and C. Giese, “An overview on bioreactor design, prototyping and process control for reproducible three-dimensional tissue culture,” in Culture of Cells For Tissue Engineering, G. Vunjack-Novakovic and R. Ian Freshney, Eds., pp. 53–78, John Wiley & Sons, 2006.
  9. I. Martin, D. Wendt, and M. Heberer, “The role of bioreactors in tissue engineering,” Trends in Biotechnology, vol. 22, no. 2, pp. 80–86, 2004. View at Publisher · View at Google Scholar · View at Scopus
  10. Y. Martin and P. Vermette, “Bioreactors for tissue mass culture: design, characterization, and recent advances,” Biomaterials, vol. 26, no. 35, pp. 7481–7503, 2005. View at Publisher · View at Google Scholar · View at Scopus
  11. A. J. El Haj, M. A. Wood, P. Thomas, and Y. Yang, “Controlling cell biomechanics in orthopaedic tissue engineering and repair,” Pathologie Biologie, vol. 53, no. 10, pp. 581–589, 2005. View at Publisher · View at Google Scholar · View at Scopus
  12. E. M. Bueno, B. Bilgen, R. L. Carrier, and G. A. Barabino, “Increased rate of chondrocyte aggregation in a wavy-walled bioreactor,” Biotechnology and Bioengineering, vol. 88, no. 6, pp. 767–777, 2004. View at Publisher · View at Google Scholar · View at Scopus
  13. H.-C. Chen and Y.-C. Hu, “Bioreactors for tissue engineering,” Biotechnology Letters, vol. 28, no. 18, pp. 1415–1423, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. H. Tabesh, G. Amoabediny, N. S. Nik et al., “The role of biodegradable engineered scaffolds seeded with Schwann cells for spinal cord regeneration,” Neurochemistry International, vol. 54, no. 2, pp. 73–83, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Y. Kannan, H. J. Salacinski, K. Sales, P. Butler, and A. M. Seifalian, “The roles of tissue engineering and vascularisation in the development of micro-vascular networks: a review,” Biomaterials, vol. 26, no. 14, pp. 1857–1875, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. B. J. Lawrence, M. Devarapalli, and S. V. Madihally, “Flow dynamics in bioreactors containing tissue engineering scaffolds,” Biotechnology and Bioengineering, vol. 102, no. 3, pp. 935–947, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Wendt, N. Timmins, J. Malda, F. Janssen, A. Ratcliffe, G. Vunjak-Novakovic, et al., “Bioreactors for tissue engineering,” in Tissue Engineering, C. van Blitterswijk, P. Thomsen, J. Hubbell, R. Cancedda, J. D. de Bruijn, A. Lindahl, et al., Eds., pp. 484–506, 2008.
  18. P. Rolfe, “Sensing in tissue bioreactors,” Measurement Science and Technology, vol. 17, no. 3, pp. 578–583, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. G. F. Muschler, C. Nakamoto, and L. G. Griffith, “Engineering principles of clinical cell-based tissue engineering,” Journal of Bone and Joint Surgery A, vol. 86, no. 7, pp. 1541–1558, 2004. View at Scopus
  20. S. J. Wang and J. J. Zhong, “Bioreactor engineering,” in Bioprocessing For Value-Added Products From Renewable Resources, S. T. Yang, Ed., Elsevier, 2007.
  21. R. Depprich, J. Handschel, H.-P. Wiesmann, J. Jäsche-Meyer, and U. Meyer, “Use of bioreactors in maxillofacial tissue engineering,” British Journal of Oral and Maxillofacial Surgery, vol. 46, no. 5, pp. 349–354, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Eibl, D. Eibl, R. Portner, G. Catapano, and P. Czermak, Cell and Tissue Reaction Engineering, Springer, New York, NY, USA, 2008.
  23. I. Rivera-Solorio and S. J. Kleis, “Model of the mass transport to the surface of animal cells cultured in a rotating bioreactor operated in micro gravity,” Biotechnology and Bioengineering, vol. 94, no. 3, pp. 495–504, 2006. View at Publisher · View at Google Scholar · View at Scopus
  24. J. Malda, M. Radisic, S. Levenberg et al., “Cell nutrition,” in Tissue Engineering, C. van Blitterswijk, P. Thomsen, J. Hubbell et al., Eds., pp. 328–362, 2008.
  25. F. Garcia-Ochoa and E. Gomez, “Bioreactor scale-up and oxygen transfer rate in microbial processes: an overview,” Biotechnology Advances, vol. 27, no. 2, pp. 153–176, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. R. Hermann, M. Lehmann, and J. Büchs, “Characterization of gas-liquid mass transfer phenomena in microtiter plates,” Biotechnology and Bioengineering, vol. 81, no. 2, pp. 178–186, 2003. View at Publisher · View at Google Scholar · View at Scopus
  27. S. Suresh, V. C. Srivastava, and I. M. Mishra, “Techniques for oxygen transfer measurement in bioreactors: a review,” Journal of Chemical Technology and Biotechnology, vol. 84, pp. 1091–1103, 2009.
  28. D. A. V. Marques, B. R. Torres, A. L. F. Porto, A. Pessoa-Júnior, and A. Converti, “Comparison of oxygen mass transfer coefficient in simple and extractive fermentation systems,” Biochemical Engineering Journal, vol. 47, no. 1–3, pp. 122–126, 2009. View at Publisher · View at Google Scholar · View at Scopus
  29. H. Tabesh, G. Amoabediny, N. Salehi-Nik, K. Esfahani, H. Derakhshanfar, and B. Zandieh Doulabi, “Use of computerized simulation of engineering parameters in tissue-engineering bioreactors,” European Spine Journal, vol. 19, Article ID 1408, 2010.
  30. A. B. Yeatts and J. P. Fisher, “Bone tissue engineering bioreactors: dynamic culture and the influence of shear stress,” Bone, vol. 48, no. 2, pp. 171–181, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. N. Sakamoto, N. Saito, X. Han, T. Ohashi, and M. Sato, “Effect of spatial gradient in fluid shear stress on morphological changes in endothelial cells in response to flow,” Biochemical and Biophysical Research Communications, vol. 395, no. 2, pp. 264–269, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. M. B. Simmers, A. W. Pryor, and B. R. Blackman, “Arterial shear stress regulates endothelial cell-directed migration, polarity, and morphology in confluent monolayers,” The American Journal of Physiology, vol. 293, no. 3, pp. H1937–H1946, 2007. View at Publisher · View at Google Scholar · View at Scopus
  33. R. J. McCoy and F. J. O'Brien, “Influence of shear stress in perfusion bioreactor cultures for the development of three-dimensional bone tissue constructs: a review,” Tissue Engineering B, vol. 16, no. 6, pp. 587–601, 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. S. D. Waldman, D. C. Couto, M. D. Grynpas, R. M. Pilliar, and R. A. Kandel, “Multi-axial mechanical stimulation of tissue engineered cartilage: review,” European Cells and Materials, vol. 13, pp. 66–73, 2007. View at Scopus
  35. R. G. Bacabac, T. H. Smit, J. J. W. A. Van Loon, B. Z. Doulabi, M. Helder, and J. Klein-Nulend, “Bone cell responses to high-frequency vibration stress: does the nucleus oscillate within the cytoplasm?” FASEB Journal, vol. 20, no. 7, pp. 858–864, 2006. View at Publisher · View at Google Scholar · View at Scopus
  36. G. Lemon, J. R. King, H. M. Byrne, O. E. Jensen, and K. M. Shakesheff, “Mathematical modelling of engineered tissue growth using a multiphase porous flow mixture theory,” Journal of Mathematical Biology, vol. 52, no. 5, pp. 571–594, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. A. Vatsa, T. H. Smit, and J. Klein-Nulend, “Extracellular NO signalling from a mechanically stimulated osteocyte,” Journal of Biomechanics, vol. 40, no. 1, pp. S89–S95, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. R. G. Bacabac, D. Mizuno, C. F. Schmidt et al., “Round versus flat: bone cell morphology, elasticity, and mechanosensing,” Journal of Biomechanics, vol. 41, pp. 1590–1598, 2008. View at Publisher · View at Google Scholar · View at Scopus
  39. H. J. Henzler, “Particle stress in bioreactors,” Advances in Biochemical Engineering/Biotechnology, vol. 67, pp. 35–82, 2000. View at Scopus
  40. B. J. H. Zoro, S. Owen, R. A. L. Drake, and M. Hoare, “The impact of process stress on suspended anchorage-dependent mammalian cells as an indicator of likely challenges for regenerative medicines,” Biotechnology and Bioengineering, vol. 99, no. 2, pp. 468–474, 2008. View at Publisher · View at Google Scholar · View at Scopus
  41. V. Bayati, Y. Sadeghi, M. A. Shokrgozar et al., “The evaluation of cyclic uniaxial strain on myogenic differentiation of adipose-derived stem cells,” Tissue and Cell, vol. 43, no. 6, pp. 359–366, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. J. Hatami, M. Tafazzoli-Shadpour, N. Haghighipour, and M. A. Shokrgozar, “Evaluation of Effects of cyclic loading on structural properties of cultured endothelial cell,” Modares Journal of Medical Sciences, vol. 12, no. 4, pp. 19–30, 2010.
  43. N. Haghighipour, M. Tafazzoli-Shadpour, M. A. Shokrgozar, S. Amini, A. Amanzadeh, and M. T. Khorasani, “Topological remodeling of cultured endothelial cells by characterized cyclic strains,” MCB Molecular and Cellular Biomechanics, vol. 4, no. 4, pp. 189–199, 2007. View at Scopus
  44. N. Haghighipour, M. Tafazzoli-Shadpour, and A. Avolio, “Residual stress distribution in a lamellar model of the arterial wall,” Journal of Medical Engineering and Technology, vol. 34, no. 7-8, pp. 422–428, 2010. View at Publisher · View at Google Scholar · View at Scopus
  45. N. Haghighipour, M. Tafazzoli-Shadpour, M. A. Shokrgozar, and S. Amini, “Effects of cyclic stretch waveform on endothelial cell morphology using fractal analysis,” Artificial Organs, vol. 34, no. 6, pp. 481–490, 2010. View at Publisher · View at Google Scholar · View at Scopus
  46. F. Safshekan, M. Tafazzoli Shadpour, M. A. Shokrgozar, N. Haghighipour, R. Mahdian, and A. Hemmati, “Intermittent hydrostatic pressure enhances growth factor-induced chondroinduction of human adipose-derived mesenchymal stem cells,” Artificial Organs, vol. 36, no. 12, pp. 1065–1071, 2012.
  47. A. D. Bakker, K. Soejima, J. Klein-Nulend, and E. H. Burger, “The production of nitric oxide and prostaglandin E2 by primary bone cells is shear stress dependent,” Journal of Biomechanics, vol. 34, no. 5, pp. 671–677, 2001. View at Publisher · View at Google Scholar · View at Scopus
  48. H. ] Kaur, R. Carriveau, and B. Mutus, “A simple parallel plate flow chamber to study effects of shear stress on endothelial cells,” The American Journal of Biomedical Sciences, vol. 4, no. 1, pp. 70–78, 2012.
  49. H. Kang, Y. Fan, and X. Deng, “Vascular smooth muscle cell glycocalyx modulates shear-induced proliferation, migration, and NO production responses,” The American Journal of Physiology, vol. 300, no. 1, pp. H76–H83, 2011. View at Publisher · View at Google Scholar · View at Scopus
  50. B. C. Isenberg, C. Williams, and R. T. Tranquillo, “Small-diameter artificial arteries engineered in vitro,” Circulation Research, vol. 98, no. 1, pp. 25–35, 2006. View at Publisher · View at Google Scholar · View at Scopus
  51. S. E. Diamantouros, L. G. Hurtado-Aguilar, T. Schmitz-Rode, P. Mela, and S. Jockenhoevel, “Pulsatile perfusion bioreactor system for durability testing and compliance estimation of tissue engineered vascular grafts,” Annals of Biomedical Engineering, 2013. View at Publisher · View at Google Scholar
  52. M. S. Hahn, M. K. McHale, E. Wang, R. H. Schmedlen, and J. L. West, “Physiologic pulsatile flow bioreactor conditioning of poly(ethylene glycol)-based tissue engineered vascular grafts,” Annals of Biomedical Engineering, vol. 35, no. 2, pp. 190–200, 2007. View at Publisher · View at Google Scholar · View at Scopus
  53. M. T. Zaucha, J. Raykin, W. Wan et al., “A novel cylindrical biaxial computer-controlled bioreactor and biomechanical testing device for vascular tissue engineering,” Tissue Engineering A, vol. 15, no. 11, pp. 3331–3340, 2009. View at Publisher · View at Google Scholar · View at Scopus
  54. N. Haghighipour, S. Heidarian, M. A. Shokrgozar, and N. Amirizadeh, “Differential effects of cyclic uniaxial stretch on human mesenchymal stem cell into skeletal muscle cell,” Cell Biology International, vol. 36, no. 7, pp. 669–675, 2012.
  55. M. Petrović, D. Mitraković, B. Bugarski, D. Vonwil, I. Martin, and B. Obradović, “A novel bioreactor with mechanical stimulation for skeletal tissue engineering,” Chemical Industry and Chemical Engineering Quarterly, vol. 15, no. 1, pp. 41–44, 2009. View at Publisher · View at Google Scholar · View at Scopus
  56. N. Tandon, A. Marsano, R. Maidhof et al., “Surface-patterned electrode bioreactor for electrical stimulation,” Lab on a Chip, vol. 10, no. 6, pp. 692–700, 2010. View at Publisher · View at Google Scholar · View at Scopus
  57. N. Tandon, A. Marsano, C. Cannizzaro, J. Voldman, and G. Vunjak-Novakovic, “Design of electrical stimulation bioreactors for cardiac tissue engineering,” Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, vol. 2008, pp. 3594–3597, 2008. View at Scopus
  58. M. Radisic, H. Park, H. Shing et al., “Functional assembly of engineered myocardium by electrical stimulation of cardiac myocytes cultured on scaffolds,” Proceedings of the National Academy of Sciences of the United States of America, vol. 101, no. 52, pp. 18129–18134, 2004. View at Publisher · View at Google Scholar · View at Scopus
  59. N. Tandon, A. Marsano, R. Maidhof, L. Wan, H. Park, and G. Vunjak-Novakovic, “Optimization of electrical stimulation parameters for cardiac tissue engineering,” Journal of Tissue Engineering and Regenerative Medicine, vol. 5, no. 6, pp. e115–e125, 2011. View at Publisher · View at Google Scholar · View at Scopus
  60. I. C. Liao, J. B. Liu, N. Bursac, and K. W. Leong, “Effect of electromechanical stimulation on the maturationofmyotubes on aligned electrospun fibers,” Cellular and Molecular Bioengineering, vol. 1, pp. 133–145, 2008.
  61. J. Malda, T. B. F. Woodfield, F. van der Vloodt et al., “The effect of PEGT/PBT scaffold architecture on the composition of tissue engineered cartilage,” Biomaterials, vol. 26, no. 1, pp. 63–72, 2005. View at Publisher · View at Google Scholar · View at Scopus
  62. A. Fernandes-Platzgummer, M. M. Diogo, R. P. Baptista, C. L. D. Silva, and J. M. S. Cabral, “Scale-up of mouse embryonic stem cell expansion in stirred bioreactors,” Biotechnology Progress, vol. 27, no. 5, pp. 1421–1432, 2011. View at Publisher · View at Google Scholar · View at Scopus
  63. S. Partap, N. A. Plunkett, and F. J. O’ Brien, “Bioreactors in tissue engineering,” in Tissue Engineering, D. Eberli, Ed., pp. 323–337, 2010.
  64. A. B. Yeatts and J. P. Fisher, “Bone tissue engineering bioreactors: dynamic culture and the influence of shear stress,” Bone, vol. 48, no. 2, pp. 171–181, 2011. View at Publisher · View at Google Scholar · View at Scopus
  65. E. Oragui, M. Nannaparaju, and W. S. Khan, “The role of bioreactors in tissue engineering for musculoskeletal applications,” The Open Orthopaedics Journal, vol. 5, pp. 267–270, 2011.
  66. X. Zhang, C.-A. Bürki, M. Stettler et al., “Efficient oxygen transfer by surface aeration in shaken cylindrical containers for mammalian cell cultivation at volumetric scales up to 1000 L,” Biochemical Engineering Journal, vol. 45, no. 1, pp. 41–47, 2009. View at Publisher · View at Google Scholar · View at Scopus
  67. L. A. Belfiore, W. Bonani, M. Leoni, and C. J. Belfiore, “Pressure-sensitive nutrient consumption via dynamic normal stress in rotational bioreactors,” Biophysical Chemistry, vol. 140, no. 1–3, pp. 99–107, 2009. View at Publisher · View at Google Scholar · View at Scopus
  68. D. Nesic, R. Whiteside, M. Brittberg, D. Wendt, I. Martin, and P. Mainil-Varlet, “Cartilage tissue engineering for degenerative joint disease,” Advanced Drug Delivery Reviews, vol. 58, no. 2, pp. 300–322, 2006. View at Publisher · View at Google Scholar · View at Scopus
  69. S. R. Khetani and S. N. Bhatia, “Engineering tissues for in vitro applications,” Current Opinion in Biotechnology, vol. 17, no. 5, pp. 524–531, 2006. View at Publisher · View at Google Scholar · View at Scopus
  70. X. Yu, E. A. Botchwey, E. M. Levine, S. R. Pollack, and C. T. Laurencin, “Bioreactor-based bone tissue engineering: the influence of dynamic flow on osteoblast phenotypic expression and matrix mineralization,” Proceedings of the National Academy of Sciences of the United States of America, vol. 101, no. 31, pp. 11203–11208, 2004. View at Publisher · View at Google Scholar · View at Scopus
  71. Z.-Y. Zhang, S. H. Teoh, W.-S. Chong et al., “A biaxial rotating bioreactor for the culture of fetal mesenchymal stem cells for bone tissue engineering,” Biomaterials, vol. 30, no. 14, pp. 2694–2704, 2009. View at Publisher · View at Google Scholar · View at Scopus
  72. S. Lotter and J. Büchs, “Utilization of specific power input measurements for optimization of culture conditions in shaking flasks,” Biochemical Engineering Journal, vol. 17, no. 3, pp. 195–203, 2004. View at Publisher · View at Google Scholar · View at Scopus
  73. T. Anderlei, W. Zang, M. Papaspyrou, and J. Büchs, “Online respiration activity measurement (OTR, CTR, RQ) in shake flasks,” Biochemical Engineering Journal, vol. 17, no. 3, pp. 187–194, 2004. View at Publisher · View at Google Scholar · View at Scopus
  74. S. A. Freyer, M. König, and A. Künkel, “Validating shaking flasks as representative screening systems,” Biochemical Engineering Journal, vol. 17, no. 3, pp. 169–173, 2004. View at Publisher · View at Google Scholar · View at Scopus
  75. A. Akgün, C. Müller, R. Engmann, and J. Büchs, “Application of an improved continuous parallel shaken bioreactor system for three microbial model systems,” Bioprocess and Biosystems Engineering, vol. 31, no. 3, pp. 193–205, 2008. View at Publisher · View at Google Scholar · View at Scopus
  76. M. Jamnongwong, K. Loubiere, N. Dietrich, and G. Hébrard, “Experimental study of oxygen diffusion coefficients in clean water containing salt, glucose or surfactant: consequences on the liquid-side mass transfer coefficients,” Chemical Engineering Journal, vol. 165, no. 3, pp. 758–768, 2010. View at Publisher · View at Google Scholar · View at Scopus
  77. J. J. Bellucci and K. H. Hamaker, “Evaluation of oxygen transfer rates in stirred-tank bioreactors for clinical manufacturing,” Biotechnology Progress, vol. 27, no. 2, pp. 368–376, 2011. View at Publisher · View at Google Scholar · View at Scopus
  78. W. A. Duetz and B. Witholt, “Oxygen transfer by orbital shaking of square vessels and deepwell microtiter plates of various dimensions,” Biochemical Engineering Journal, vol. 17, no. 3, pp. 181–185, 2004. View at Publisher · View at Google Scholar · View at Scopus
  79. S. D. Doig, S. C. R. Pickering, G. J. Lye, and F. Baganz, “Modelling surface aeration rates in shaken microtitre plates using dimensionless groups,” Chemical Engineering Science, vol. 60, no. 10, pp. 2741–2750, 2005. View at Publisher · View at Google Scholar · View at Scopus
  80. P. Therning and A. Rasmuson, “Mass transfer measurements in a non-isothermal bubble column using the uncatalyzed oxidation of sulphite to sulphate,” Chemical Engineering Journal, vol. 116, no. 2, pp. 97–103, 2006. View at Publisher · View at Google Scholar · View at Scopus
  81. D. Cascaval, A.-I. Galaction, E. Folescu, and M. Turnea, “Comparative study on the effects of n-dodecane addition on oxygen transfer in stirred bioreactors for simulated, bacterial and yeasts broths,” Biochemical Engineering Journal, vol. 31, no. 1, pp. 56–66, 2006. View at Publisher · View at Google Scholar · View at Scopus
  82. M. S. Puthli, V. K. Rathod, and A. B. Pandit, “Gas-liquid mass transfer studies with triple impeller system on a laboratory scale bioreactor,” Biochemical Engineering Journal, vol. 23, no. 1, pp. 25–30, 2005. View at Publisher · View at Google Scholar · View at Scopus
  83. J. M. Seletzky, U. Noack, J. Fricke, S. Hahn, and J. Büchs, “Metabolic activity of Corynebacterium glutamicum grown on L-lactic acid under stress,” Applied Microbiology and Biotechnology, vol. 72, no. 6, pp. 1297–1307, 2006. View at Publisher · View at Google Scholar · View at Scopus
  84. G. Amoabediny, M. P. H. Abbas, and J. Büchs, “Determination of CO2 sensitivity of micro-organisms in shaken bioreactors. II. Novel online monitoring method,” Biotechnology and Applied Biochemistry, vol. 57, no. 4, pp. 167–175, 2010. View at Publisher · View at Google Scholar · View at Scopus
  85. G. Amoabediny and J. Büchs, “Determination of CO2 sensitivity of micro-organisms in shaken bioreactors. I. Novel method based on the resistance of sterile closure,” Biotechnology and Applied Biochemistry, vol. 57, no. 4, pp. 157–166, 2010. View at Publisher · View at Google Scholar · View at Scopus
  86. J. M. Seletzky, U. Noack, S. Hahn, A. Knoll, G. Amoabediny, and J. Büchs, “An experimental comparison of respiration measuring techniques in fermenters and shake flasks: exhaust gas analyzer vs. RAMOS device vs. respirometer,” Journal of Industrial Microbiology and Biotechnology, vol. 34, no. 2, pp. 123–130, 2007. View at Publisher · View at Google Scholar · View at Scopus
  87. C. Peña, C. P. Peter, J. Büchs, and E. Galindo, “Evolution of the specific power consumption and oxygen transfer rate in alginate-producing cultures of Azotobacter vinelandii conducted in shake flasks,” Biochemical Engineering Journal, vol. 36, no. 2, pp. 73–80, 2007. View at Publisher · View at Google Scholar · View at Scopus
  88. M. Scheidle, J. Klinger, and J. Büchs, “Combination of on-line pH and oxygen transfer rate measurement in shake flasks by fiber optical technique and respiration activity monitoring system (RAMOS),” Sensors, vol. 7, pp. 3472–3480, 2007.
  89. A. R. C. Ortigara, P. Foladori, and G. Andreottola, “Kinetics of heterotrophic biomass and storage mechanism in wetland cores measured by respirometry,” Water Science and Technology, vol. 64, no. 2, pp. 409–415, 2011. View at Publisher · View at Google Scholar · View at Scopus
  90. P. Liovic, I. D. Šutalo, R. Stewart, V. Glattauer, and L. Meagher, “Fluid flow and stresses on microcarriers in spinner flask bioreactors,” in Proceedings of the 9th International Conference on CFD in the Minerals and Process Industries, Melbourne, VIC, Australia, 2012.
  91. M. Rossi, R. Lindken, P. Hierck B, and J. Westerweel, “Microfluidic system for the study of mechanical and biochemical response of endothelial cells to flow-induced mechanical stimuli,” in Proceedings of the 12th Conference on Miniaturized Systems for Chemistry and Life Sciences, 2008.
  92. M. Leong Ch, A. Voorhees, and G. B. Nackman T Wei, “Flow bioreactor design for quantitative measurements over endothelial cells using micro-particle image velocimetry,” Review of Scientific Instruments, vol. 84, Article ID 045109, 10 pages, 2013.
  93. C. V. Nguyen, J. Carberry, and A. Fouras, “Volumetric-correlation PIV to measure particle concentration and velocity of microflows,” Experiments in Fluids, vol. 52, no. 3, pp. 636–677, 2011. View at Publisher · View at Google Scholar · View at Scopus
  94. S. P. A. Higgins, C. R. Samarage, D. M. Paganin, and A. Fouras, “Holographic Correlation Velocimetry,” in Proceedings of the 9th international symposium on particle image velocimetry, Kobe, Japan, 2011.
  95. M. Z. Ismadi, S. Higgins, C. R. Samarage, D. Paganin, K. Hourigan, et al., “Optimisation of a stirred bioreactor through the use of a novel holographic correlation velocimetry flow measurement technique,” Plos ONE, vol. 8, no. 6, Article ID e65714, 14 pages, 2013.
  96. T. Ooms, W. Koek, and J. Westerweel, “Digital holographic particle image velocimetry: eliminating a sign-ambiguity error and a bias error from the measured particle field displacement,” Measurement Science and Technology, vol. 19, no. 7, Article ID 074003, 2008. View at Publisher · View at Google Scholar · View at Scopus
  97. N. G. Deen, B. H. Hjertager, and T. Solberg, “Comparison of PIV and LDA measurement methods applied to the gas-liquid flow in a bubble column,” in Proceedings of the10th International Symposium on Applications of Laser Techniques to Fluid Mechanics, Lisbon, Portugal, 2000.
  98. Y. Feng, J. Goree, and B. Liu, “Errors in particle tracking velocimetry with high-speed cameras,” Review of Scientific Instruments, vol. 82, no. 5, Article ID 053707, 2011. View at Publisher · View at Google Scholar · View at Scopus
  99. Z. Chara and V. Matousek, “Comparative study of ADV and LDA measuring techniques,” in Proceedings of the 6th International Symposium on Ultrasonic Doppler Methods for Fluid Mechanics and Fluid Engineering.
  100. H. Chanson, M. Trevethan, and S. I. Aoki, “Acoustic Doppler velocimetry (ADV) in a small estuarine system,” in IIAHR Congress, Republic of Korea, 2005.
  101. R. I. Abousleiman and V. I. Sikavitsas, “Bioreactors for tissues of the musculoskeletal system,” Advances in Experimental Medicine and Biology, vol. 585, pp. 243–259, 2006. View at Publisher · View at Google Scholar · View at Scopus
  102. E. Cimetta, M. Flaibani, M. Mella et al., “Enhancement of viability of muscle precursor cells on 3D scaffold in a perfusion bioreactor,” International Journal of Artificial Organs, vol. 30, no. 5, pp. 415–428, 2007. View at Scopus
  103. S. S. Kim, R. Penkala, and P. Abrahimi, “A perfusion bioreactor for intestinal tissue engineering,” Journal of Surgical Research, vol. 142, no. 2, pp. 327–331, 2007. View at Publisher · View at Google Scholar · View at Scopus
  104. V. I. Sikavitsas, G. N. Bancroft, J. J. Lemoine, M. A. K. Liebschner, M. Dauner, and A. G. Mikos, “Flow perfusion enhances the calcified matrix deposition of marrow stromal cells in biodegradable nonwoven fiber mesh scaffolds,” Annals of Biomedical Engineering, vol. 33, no. 1, pp. 63–70, 2005. View at Publisher · View at Google Scholar · View at Scopus
  105. M. Lovett, D. Rockwood, A. Baryshyan, and D. L. Kaplan, “Simple modular bioreactors for tissue engineering: a system for characterization of oxygen gradients, human mesenchymal stem cell differentiation, and prevascularization,” Tissue Engineering C, vol. 16, no. 6, pp. 1565–1573, 2010. View at Publisher · View at Google Scholar · View at Scopus
  106. C. Lee, S. Grad, M. Wimmer, and M. Alini, “The influence of mechanical stimuli on articular cartilage tissue engineering,” in Topics in Tissue Engineering, N. Ashammakhi and R. L. Reis, Eds., vol. 2, pp. 1–32, 2005.
  107. J. Cerulli, Perfusion Bioreactor for the Development of Tissue-Engineered Blood Vessels [Bachelor thesis], Worcester polytechnic Institute, 2011.
  108. M. Radisic, A. Marsano, R. Maidhof, Y. Wang, and G. Vunjak-Novakovic, “Cardiac tissue engineering using perfusion bioreactor systems,” Nature Protocols, vol. 3, no. 4, pp. 719–738, 2008. View at Publisher · View at Google Scholar · View at Scopus
  109. U. Meyer, A. Büchter, N. Nazer, and H. P. Wiesmann, “Design and performance of a bioreactor system for mechanically promoted three-dimensional tissue engineering,” British Journal of Oral and Maxillofacial Surgery, vol. 44, no. 2, pp. 134–140, 2006. View at Publisher · View at Google Scholar · View at Scopus
  110. C. A. Chung, C. P. Chen, T. H. Lin, and C. S. Tseng, “A compact computational model for cell construct development in perfusion culture,” Biotechnology and Bioengineering, vol. 99, no. 6, pp. 1535–1541, 2008. View at Publisher · View at Google Scholar · View at Scopus
  111. C. A. Chung, C. W. Yang, and C. W. Chen, “Analysis of cell growth and diffusion in a scaffold for cartilage tissue engineering,” Biotechnology and Bioengineering, vol. 94, no. 6, pp. 1138–1146, 2006. View at Publisher · View at Google Scholar · View at Scopus
  112. M. C. Lewis, B. D. MacArthur, J. Malda, G. Pettet, and C. P. Please, “Heterogeneous proliferation within engineered cartilaginous tissue: the role of oxygen tension,” Biotechnology and Bioengineering, vol. 91, no. 5, pp. 607–615, 2005. View at Publisher · View at Google Scholar · View at Scopus
  113. J. Malda, J. Rouwkema, D. E. Martens et al., “Oxygen gradients in tissue-engineered PEGT/PBT cartilaginous constructs: measurement and modeling,” Biotechnology and Bioengineering, vol. 86, no. 1, pp. 9–18, 2004. View at Publisher · View at Google Scholar · View at Scopus
  114. X. Yan, D. J. Bergstrom, and X. B. Chen, “Modeling of cell cultures in perfusion bioreactors,” IEEE Transactions on Biomedical Engineering, vol. 59, no. 9, pp. 2568–2575, 2012.
  115. R. D. O'Dea, S. L. Waters, and H. M. Byrne, “A two-fluid model for tissue growth within a dynamic flow environment,” European Journal of Applied Mathematics, vol. 19, no. 6, pp. 607–634, 2008. View at Publisher · View at Google Scholar · View at Scopus
  116. Y. Shi, “Numerical simulation of global hydro-dynamics in a pulsatile bioreactor for cardiovascular tissue engineering,” Journal of Biomechanics, vol. 41, no. 5, pp. 953–959, 2008. View at Publisher · View at Google Scholar · View at Scopus
  117. P. Sucosky, D. F. Osorio, J. B. Brown, and G. P. Neitzel, “Fluid mechanics of a spinner-flask bioreactor,” Biotechnology and Bioengineering, vol. 85, no. 1, pp. 34–46, 2004. View at Publisher · View at Google Scholar · View at Scopus
  118. M. Shakeel, Continuum modelling of cell growth andnutrient transport in a perfusion bioreactor [Ph.D. thesis], University of Nottingham, 2011.
  119. B. G. Sengers, C. C. van Donkelaar, C. W. J. Oomens, and F. P. T. Baaijens, “Computational study of culture conditions and nutrient supply in cartilage tissue engineering,” Biotechnology Progress, vol. 21, no. 4, pp. 1252–1261, 2005. View at Publisher · View at Google Scholar · View at Scopus
  120. C. A. Chung, C. W. Chen, C. P. Chen, and C. S. Tseng, “Enhancement of cell growth in tissue-engineering constructs under direct perfusion: modeling and simulation,” Biotechnology and Bioengineering, vol. 97, no. 6, pp. 1603–1616, 2007. View at Publisher · View at Google Scholar · View at Scopus
  121. F. Coletti, S. Macchietto, and N. Elvassore, “Mathematical modeling of three-dimensional cell cultures in perfusion bioreactors,” Industrial and Engineering Chemistry Research, vol. 45, no. 24, pp. 8158–8169, 2006. View at Publisher · View at Google Scholar · View at Scopus
  122. R. J. Whittaker, R. Booth, R. Dyson et al., “Mathematical modelling of fibre-enhanced perfusion inside a tissue-engineering bioreactor,” Journal of Theoretical Biology, vol. 256, no. 4, pp. 533–546, 2009. View at Publisher · View at Google Scholar · View at Scopus
  123. G. Amoabediny and J. Büchs, “Modelling and advanced understanding of unsteady-state gas transfer in shaking bioreactors,” Biotechnology and Applied Biochemistry, vol. 46, no. 1, pp. 57–67, 2007. View at Publisher · View at Google Scholar · View at Scopus
  124. T. Anderlei, C. Mrotzek, S. Bartsch, G. Amoabediny, C. P. Peter, and J. Büchs, “New method to determine the mass transfer resistance of sterile closures for shaken bioreactors,” Biotechnology and Bioengineering, vol. 98, no. 5, pp. 999–1007, 2007. View at Publisher · View at Google Scholar · View at Scopus
  125. M. Pisu, N. Lai, A. Cincotti, A. Concas, and G. Cao, “Modeling of engineered cartilage growth in rotating bioreactors,” Chemical Engineering Science, vol. 59, no. 22-23, pp. 5035–5040, 2004. View at Publisher · View at Google Scholar · View at Scopus
  126. N. S. Abdullah and D. B. Das, “Modelling nutrient transport in hollow fibre membrane bioreactor for growing bone tissue with consideration of multi-component interactions,” Chemical Engineering Science, vol. 62, no. 21, pp. 5821–5839, 2007. View at Publisher · View at Google Scholar · View at Scopus
  127. P. Yu, T. S. Lee, Y. Zeng, and H. T. Low, “A 3D analysis of oxygen transfer in a low-cost micro-bioreactor for animal cell suspension culture,” Computer Methods and Programs in Biomedicine, vol. 85, no. 1, pp. 59–68, 2007. View at Publisher · View at Google Scholar · View at Scopus
  128. M. Cioffi, F. Boschetti, M. T. Raimondi, and G. Dubini, “Modeling evaluation of the fluid-dynamic microenvironment in tissue-engineered constructs: a micro-CT based model,” Biotechnology and Bioengineering, vol. 93, no. 3, pp. 500–510, 2006. View at Publisher · View at Google Scholar · View at Scopus
  129. D. W. Hutmacher and H. Singh, “Computational fluid dynamics for improved bioreactor design and 3D culture,” Trends in Biotechnology, vol. 26, no. 4, pp. 166–172, 2008. View at Publisher · View at Google Scholar · View at Scopus
  130. B. Porter, R. Zauel, H. Stockman, R. Guldberg, and D. Fyhrie, “3-D computational modeling of media flow through scaffolds in a perfusion bioreactor,” Journal of Biomechanics, vol. 38, no. 3, pp. 543–549, 2005. View at Publisher · View at Google Scholar · View at Scopus
  131. H. Dubey, S. K. Das, and T. Panda, “Numerical simulation of a fully baffled biological reactor: the differential circumferential averaging mixing plane approach,” Biotechnology and Bioengineering, vol. 95, no. 4, pp. 754–766, 2006. View at Publisher · View at Google Scholar · View at Scopus
  132. H. Singh, S. A. Eng, T. T. Lim, and D. W. Hutmacher, “Flow modeling in a novel non-perfusion conical bioreactor,” Biotechnology and Bioengineering, vol. 97, no. 5, pp. 1291–1299, 2007. View at Publisher · View at Google Scholar · View at Scopus
  133. Y. Zeng, T.-S. Lee, P. Yu, P. Roy, and H.-T. Low, “Mass transport and shear stress in a microchannel bioreactor: numerical simulation and dynamic similarity,” Journal of Biomechanical Engineering, vol. 128, no. 2, pp. 185–193, 2006. View at Publisher · View at Google Scholar · View at Scopus
  134. C. Provin, K. Takano, Y. Sakai, T. Fujii, and R. Shirakashi, “A method for the design of 3D scaffolds for high-density cell attachment and determination of optimum perfusion culture conditions,” Journal of Biomechanics, vol. 41, no. 7, pp. 1436–1449, 2008. View at Publisher · View at Google Scholar · View at Scopus
  135. F. Boschetti, M. T. Raimondi, F. Migliavacca, and G. Dubini, “Prediction of the micro-fluid dynamic environment imposed to three-dimensional engineered cell systems in bioreactors,” Journal of Biomechanics, vol. 39, no. 3, pp. 418–425, 2006. View at Publisher · View at Google Scholar · View at Scopus
  136. B. Pouran, G. Amoabediny, S. Saghafinia, and M. P. Haji Abbas, “Characterization of interfacial hydrodynamics in a single cell of shaken microtiter plate bioreactors applying computational fluid dynamics technique,” Procedia Engineering, vol. 42, pp. 924–930, 2012.
  137. P. Yu, T. S. Lee, Y. Zeng, and H. T. Low, “Fluid dynamics of a micro-bioreactor for tissue engineering,” Fluid Dynamics and Materials Processing, vol. 1, pp. 235–246, 2005.
  138. B. Bilgen and G. A. Barabino, “Location of scaffolds in bioreactors modulates the hydrodynamic environment experienced by engineered tissues,” Biotechnology and Bioengineering, vol. 98, no. 1, pp. 282–294, 2007. View at Publisher · View at Google Scholar · View at Scopus
  139. H. O. Tabrizi, G. Amoabediny, B. Moshiri et al., “Novel dynamic model for aerated shaking bioreactors,” Biotechnology and Applied Biochemistry, vol. 58, no. 2, pp. 128–137, 2011. View at Publisher · View at Google Scholar · View at Scopus