Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns

<div>Schematic representation of the measurement areas (indicated by Roman numerals) in a cross section of a lithium disilicate CAD/CAM crown. I: marginal area; II: chamfer area; III: axial area; IV: axioocclusal angle; V: occlusal area; CAD/CAM: computer-aided design/computer-aided manufacture.</div>

BioMed Research International

fig2

Figure 2

Figure 2: Effect of the Crystallization Process on the Marginal and Internal Gaps of Lithium Disilicate CAD/CAM Crowns 