New Configurations of Low-Cost Dual-Polarized Printed Antennas for UWB Arrays
Figure 2
Geometry of the radiating element under analysis in Section 4, based on another rhombic element printed on the top layer, and a rhombic element printed on the second layer. (a) 3D view of the antenna. (b) Upper view of the structure. Same three-layer configuration as in Figure 1. Geometrical parameters of the patches of the upper element: mm, mm, mm, mm, mm, mm, mm, and mm. The diameter of the probes feeding the upper element is mm. Geometrical parameters of the patches of the lower element: mm, mm, mm, mm, mm, mm, mm, and mm. ( and are the width and the length of the th patch, resp.) The diameter of the probes feeding the lower element is mm. The size of the box is 40 mm.
