Research Article
Miniaturized Printed Inverted-F Antenna for Internet of Things: A Design on PCB with a Meandering Line and Shorting Strip
Table 3
Comparison between proposed PIFA, Walsin [
12], and Murata antennas [
14].
| Antenna | Type | Volume (include the matching network) | Extra components |
| Proposed PIFA | PCB | 15 × 6.0 × 0.035 mm3 | No extra cost required | Walsin | LTCC | 12 × 5.0 × 1.2 mm3 | 1 antenna and 2 passive components | Murata | LTCC | 12 × 5.0 × 1.2 mm3 | 1 antenna and 2 passive components |
|
|