About this Journal Submit a Manuscript Table of Contents
International Journal of Biomaterials
Volume 2013 (2013), Article ID 240631, 7 pages
http://dx.doi.org/10.1155/2013/240631
Research Article

Blends of Thermoplastic Polyurethane and Polydimethylsiloxane Rubber: Assessment of Biocompatibility and Suture Holding Strength of Membranes

1Department of Chemical Engineering Technology, Yanbu Industrial College, Royal Commission for Jubail and Yanbu, P.O. Box 30436, Yanbu Industrial City 21 477, Saudi Arabia
2Biomedical Technology Wing, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Poojapura, Thiruvananthapuram, Kerala 695 012, India
3Rubber Technology Centre, Indian Institute of Technology, Kharagpur 721302, India

Received 14 June 2013; Accepted 12 November 2013

Academic Editor: Bikramjit Basu

Copyright © 2013 Krishna Prasad Rajan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Krishna Prasad Rajan, Ahmed Al-Ghamdi, Ramesh Parameswar, and G. B. Nando, “Blends of Thermoplastic Polyurethane and Polydimethylsiloxane Rubber: Assessment of Biocompatibility and Suture Holding Strength of Membranes,” International Journal of Biomaterials, vol. 2013, Article ID 240631, 7 pages, 2013. doi:10.1155/2013/240631