- About this Journal ·
- Abstracting and Indexing ·
- Advance Access ·
- Aims and Scope ·
- Article Processing Charges ·
- Articles in Press ·
- Author Guidelines ·
- Bibliographic Information ·
- Citations to this Journal ·
- Contact Information ·
- Editorial Board ·
- Editorial Workflow ·
- Free eTOC Alerts ·
- Publication Ethics ·
- Reviewers Acknowledgment ·
- Submit a Manuscript ·
- Subscription Information ·
- Table of Contents
International Journal of Biomaterials
Volume 2013 (2013), Article ID 354125, 6 pages
Plasma Treatment Maintains Surface Energy of the Implant Surface and Enhances Osseointegration
1Department of Biomaterials and Biomimetics, College of Dentistry, New York University, Room 813a, 345 East 24th Street, New York, NY 10010, USA
2Department of Surgery and Integrated Clinic, São Paulo State University, 16015 Araçatuba, SP, Brazil
3Department of Postgraduate Dentistry, UNIGRANRIO, 25071 Duque de Caxias, RJ, Brazil
4Department of Prosthodontics, Faculty of Odontology, Malmö University, 205 06 Malmö, Sweden
5Department of Oral & Maxillofacial Surgery and Implantology, University of Uberlândia, 38408 Uberlândia, MG, Brazil
Received 31 October 2012; Accepted 25 November 2012
Academic Editor: Carlos Nelson Elias
Copyright © 2013 Fernando P. S. Guastaldi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
- P. G. Coelho, J. M. Granjeiro, G. E. Romanos et al., “Basic research methods and current trends of dental implant surfaces,” Journal of Biomedical Materials Research B, vol. 88, no. 2, pp. 579–596, 2009.
- R. Jimbo, T. Sawase, Y. Shibata et al., “Enhanced osseointegration by the chemotactic activity of plasma fibronectin for cellular fibronectin positive cells,” Biomaterials, vol. 28, no. 24, pp. 3469–3477, 2007.
- P. G. Coelho, G. Giro, H. S. Teixeira, et al., “Argon-based atmospheric pressure plasma enhances early bone response to rough titanium surfaces,” Journal of Biomedical Materials Research A, vol. 100, pp. 1901–1906, 2012.
- T. Albrektsson and A. Wennerberg, “Oral implant surfaces: part 1-review focusing on topographic and chemical properties of different surfaces and in vivo responses to them,” International Journal of Prosthodontics, vol. 17, no. 5, pp. 536–543, 2004.
- T. Albrektsson and A. Wennerberg, “Oral implant surfaces: part 2-review focusing on clinical knowledge of different surfaces,” International Journal of Prosthodontics, vol. 17, no. 5, pp. 544–564, 2004.
- A. Wennerberg and T. Albrektsson, “On implant surfaces: a review of current knowledge and opinions,” The International Journal of Oral & Maxillofacial Implants, vol. 25, no. 1, pp. 63–74, 2010.
- T. Albrektsson, D. Buser, and L. Sennerby, “on crestal/marginal bone loss around dental implants,” The International Journal of Oral & Maxillofacial Implants, vol. 27, pp. 736–738, 2012.
- T. Albrektsson, D. Buser, and L. Sennerby, “On crestal/marginal bone loss around dental implants,” The International Journal of Prosthodontics, vol. 25, pp. 320–322, 2012.
- A. Göransson, A. Arvidsson, F. Currie et al., “An in vitro comparison of possibly bioactive titanium implant surfaces,” Journal of Biomedical Materials Research A, vol. 88, no. 4, pp. 1037–1047, 2009.
- B. S. Kang, Y. T. Sul, S. J. Oh, H. J. Lee, and T. Albrektsson, “XPS, AES and SEM analysis of recent dental implants,” Acta Biomaterialia, vol. 5, no. 6, pp. 2222–2229, 2009.
- R. Jimbo, J. Sotres, C. Johansson, K. Breding, F. Currie, and A. Wennerberg, “The biological response to three different nanostructures applied on smooth implant surfaces,” Clinical Oral Implants Research, vol. 23, no. 6, pp. 706–712, 2012.
- T. Sawase, R. Jimbo, K. Baba, Y. Shibata, T. Ikeda, and M. Atsuta, “Photo-induced hydrophilicity enhances initial cell behavior and early bone apposition,” Clinical Oral Implants Research, vol. 19, no. 5, pp. 491–496, 2008.
- R. E. Baier, A. E. Meyer, and J. R. Natiella, “Surface properties determine bioadhesive outcomes: methods and results,” Journal of Biomedical Materials Research, vol. 18, no. 4, pp. 337–355, 1984.
- L. V. Carlsson, T. Alberktsson, and C. Berman, “Bone response to plasma-cleaned titanium implants,” The International Journal of Oral & Maxillofacial Implants, vol. 4, no. 3, pp. 199–204, 1989.
- D. Buser, N. Broggini, M. Wieland et al., “Enhanced bone apposition to a chemically modified SLA titanium surface,” Journal of Dental Research, vol. 83, no. 7, pp. 529–533, 2004.
- O. Santos, I. E. Svendsen, L. Lindh, and T. Arnebrant, “Adsorption of HSA, IgG and laminin-1 on model titania surfaces—effects of glow discharge treatment on competitively adsorbed film composition,” Biofouling, vol. 27, pp. 1003–1015, 2011.
- R. Jimbo, M. Ivarsson, A. Koskela, Y.-T Sul, and C. B. Johansson, “Protein adsorption to surface chemistry and crystal structure modification of titanium surfaces,” Journal of Oral & Maxillofacial Research, vol. 1, no. 3, article e3, 2010.
- R. Jimbo, T. Sawase, K. Baba, T. Kurogi, Y. Shibata, and M. Atsuta, “Enhanced initial cell responses to chemically modified anodized titanium,” Clinical Implant Dentistry and Related Research, vol. 10, no. 1, pp. 55–61, 2008.
- M. Hayashi, R. Jimbo, L. Lindh, et al., “In vitro characterization and osteoblast responses to nanostructured photocatalytic TiO2 coated surfaces,” Acta Biomaterialia, vol. 8, pp. 2411–2416, 2012.
- J. Karlsson, R. Jimbo, H. M. Fathali, et al., “In vivo biomechanical stability of osseointegrating mesoporous TiO2 implants,” Acta Biomaterialia, vol. 8, no. 12, pp. 4438–4446, 2012.
- R. Foest, E. Kindel, A. Ohl, M. Stieber, and K. D. Weltmann, “Non-thermal atmospheric pressure discharges for surface modification,” Plasma Physics and Controlled Fusion, vol. 47, no. 12, pp. B525–B536, 2005.
- R. Foest, M. Schmidt, and K. Becker, “Microplasmas, an emerging field of low-temperature plasma science and technology,” International Journal of Mass Spectrometry, vol. 248, no. 3, pp. 87–102, 2006.
- K. Duske, I. Koban, E. Kindel, et al., “Atmospheric plasma enhances wettability and cell spreading on dental implant metals,” Journal of Clinical Periodontology, vol. 39, pp. 400–407, 2012.
- T. Albrektsson, “Hydroxyapatite-coated implants: a case against their use,” Journal of Oral and Maxillofacial Surgery, vol. 56, no. 11, pp. 1312–1326, 1998.
- A. Quaranta, G. Iezzi, A. Scarano et al., “A histomorphometric study of nanothickness and plasma-sprayed calcium-phosphorous-coated implant surfaces in rabbit bone,” Journal of Periodontology, vol. 81, no. 4, pp. 556–561, 2010.
- M. Laroussi and T. Akan, “Arc-free atmospheric pressure cold plasma jets: a review,” Plasma Processes and Polymers, vol. 4, no. 9, pp. 777–788, 2007.
- B. Eliasson and U. Kogelschatz, “Modeling and applications of silent discharge plasmas,” IEEE Transactions on Plasma Science, vol. 19, no. 2, pp. 309–323, 1991.
- T. Sawase, R. Jimbo, A. Wennerberg, N. Suketa, Y. Tanaka, and M. Atsuta, “A novel characteristic of porous titanium oxide implants,” Clinical Oral Implants Research, vol. 18, no. 6, pp. 680–685, 2007.
- M. J. Stachowski, J. Medige, and R. E. Baier, “Methodology for testing the mechanical properties of the bone/titanium implant interface,” in Environmental Degradation of Engineering Materials, vol. 3, pp. 493–500, University Park: Pensilvania State University, 1987.
- R. J. Good and C. J. van Oss, Modern Approaches to Wettability: Theory and Applications, Edited by M. E. Schrader, G.I. Loeb, Plenum Press, New York, NY, USA, 1992.
- P. G. Coelho, M. Suzuki, M. V. Guimaraes et al., “Early bone healing around different implant bulk designs and surgical techniques: a study in dogs,” Clinical Implant Dentistry and Related Research, vol. 12, no. 3, pp. 202–208, 2010.
- C. Marin, R. Granato, M. Suzuki et al., “Biomechanical and histomorphometric analysis of etched and non-etched resorbable blasting media processed implant surfaces: an experimental study in dogs,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 3, no. 5, pp. 382–391, 2010.
- G. Leonard, P. Coelho, I. Polyzois, L. Stassen, and N. Claffey, “A study of the bone healing kinetics of plateau versus screw root design titanium dental implants,” Clinical Oral Implants Research, vol. 20, no. 3, pp. 232–239, 2009.
- P. G. Coelho and J. E. Lemons, “Physico/chemical characterization and in vivo evaluation of nanothickness bioceramic depositions on alumina-blasted/acid-etched Ti-6Al-4V implant surfaces,” Journal of Biomedical Materials Research A, vol. 90, no. 2, pp. 351–361, 2009.
- D. Staack, A. Fridman, A. Gutsol, Y. Gogotsi, and G. Friedman, “Nanoscale corona discharge in liquids, enabling nanosecond optical emission spectroscopy,” Angewandte Chemie, vol. 47, no. 42, pp. 8020–8024, 2008.
- P. G. Coelho, C. Marin, R. Granato, G. Giro, M. Suzuki, and E. A. Bonfante, “Biomechanical and histologic evaluation of non-washed resorbable blasting media and alumina-blasted/acid-etched surfaces,” Clinical Oral Implants Research, vol. 23, pp. 132–135, 2012.
- G. Giro, N. Tovar, L. Witek, et al., “Osseointegration assessment of chairside argon-based nonthermal plasma-treated Ca-P coated dental implants,” Journal of Biomedical Materials Research A, vol. 101, no. 1, pp. 98–103, 2013.
- Y. Hirakawa, R. Jimbo, Y. Shibata, I. Watanabe, A. Wennerberg, and T. Sawase, “Accelerated bone formation on photo-induced hydrophilic titanium implants: an experimental study in the dog mandible,” Clinical Oral Implants Research. In press.
- R. Jimbo, D. Ono, Y. Hirakawa, T. Odatsu, T. Tanaka, and T. Sawase, “Accelerated photo-induced hydrophilicity promotes osseointegration: an animal study,” Clinical Implant Dentistry and Related Research, vol. 13, pp. 79–85, 2011.
- H. S. Teixeira, C. Marin, L. Witek, et al., “Assessment of a chair-side argon-based non-thermal plasma treatment on the surface characteristics and integration of dental implants with textured surfaces,” Journal of the Mechanical Behavior of Biomedical Materials, vol. 9, pp. 45–49, 2012.