About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [818 citations: 1–100 of 799 articles]

Articles published in International Journal of Biomaterials have been cited 818 times. The following is a list of the 799 articles that have cited the articles published in International Journal of Biomaterials.

  • Alice Cheng, Aiza Humayun, Barbara D. Boyan, and Zvi Schwartz, “Enhanced Osteoblast Response to Porosity and Resolution of Additively Manufactured Ti-6Al-4V Constructs with Trabeculae-Inspired Porosity,” 3D Printing and Additive Manufacturing, vol. 3, no. 1, pp. 10–21, 2016. View at Publisher · View at Google Scholar
  • Rahul Upadhyay, Sharmistha Naskar, Nitu Bhaskar, Suryasarathi Bose, and Bikramjit Basu, “Modulation of Protein Adsorption and Cell Proliferation on Polyethylene Immobilized Graphene Oxide Reinforced HDPE Bionanocomposites,” ACS Applied Materials & Interfaces, 2016. View at Publisher · View at Google Scholar
  • Scott T. Robinson, Alison M. Douglas, Tatiana Chadid, Katie Kuo, Ajai Rajabalan, Haiyan Li, Ian B. Copland, Thomas H. Barker, Jacques Galipeau, and Luke P. Brewster, “A novel platelet lysate hydrogel for endothelial cell and mesenchymal stem cell-directed neovascularization,” Acta Biomaterialia, vol. 36, pp. 86–98, 2016. View at Publisher · View at Google Scholar
  • Samantha Noel, Charles Fortier, Frederic Murschel, Antoine Belzil, Guillaume Gaudet, Mario Jolicoeur, and Gregory De Crescenzo, “Co-immobilization of adhesive peptides and VEGF within a dextran-based coating for vascular applications,” Acta Biomaterialia, 2016. View at Publisher · View at Google Scholar
  • Bei Chang, Wen Song, Tianxiao Han, Jun Yan, Fuping Li, Lingzhou Zhao, Hongchao Kou, and Yumei Zhang, “Influence of pore size of porous titanium fabricated by vacuum diffusion bonding of titanium meshes on cell penetration and bone ingrowth,” Acta Biomaterialia, 2016. View at Publisher · View at Google Scholar
  • Furqan A. Shah, Omar Omar, Felicia Suska, Anders Snis, Aleksandar Matic, Lena Emanuelsson, Birgitta Norlindh, Jukka Lausmaa, Peter Thomsen, and Anders Palmquist, “Long-term osseointegration of 3D printed CoCr constructs with an interconnected open-pore architecture prepared by electron beam melting,” Acta Biomaterialia, 2016. View at Publisher · View at Google Scholar
  • L. Calabrese, F. Fabiano, M. Currò, C. Borsellino, L. M. Bonaccorsi, V. Fabiano, R. Ientile, and E. Proverbio, “Hydroxyapatite Whiskers Based Resin Composite versus Commercial Dental Composites: Mechanical and Biocompatibility Characterization,” Advances in Materials Science and Engineering, vol. 2016, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • Anni Maattanen, Petri Ihalainen, Bjorn Torngren, Emil Rosqvist, Markus Pesonen, and Jouko Peltonen, “Hierarchically structured self-supported latex films for flexible and semi-transparent electronics,” Applied Surface Science, vol. 364, pp. 37–44, 2016. View at Publisher · View at Google Scholar
  • Cristian Covarrubias, Matías Mattmann, Alfredo Von Marttens, Pablo Caviedes, Cristián Arriagada, Francisco Valenzuela, Juan Pablo Rodríguez, and Camila Corral, “Osseointegration properties of titanium dental implants modified with a nanostructured coating based on ordered porous silica and bioactive glass nanoparticles,” Applied Surface Science, vol. 363, pp. 286–295, 2016. View at Publisher · View at Google Scholar
  • Miroslaw Bramowicz, Laurentiu Braic, Funda Ak Azem, Slawomir Kulesza, Isil Birlik, and Alina Vladescu, “Mechanical properties and fractal analysis of the surface texture of sputtered hydroxyapatite coatings,” Applied Surface Science, 2016. View at Publisher · View at Google Scholar
  • J. R. S. Martins, R. O. Araujo, R. A. Nogueira, and C. R. Grandini, “INTERNAL FRICTION AND MICROSTRUCTURE OF Ti AND Ti-Mo ALLOYS CONTAINING OXYGEN,” Archives Of Metallurgy And Materials, vol. 61, no. 1, pp. 25–30, 2016. View at Publisher · View at Google Scholar
  • Fawad Javed, Mohammad D. Al Amri, Sergio Varela Kellesarian, Mansour Al-Askar, Abdulaziz A. Al-Kheraif, and Georgios E. Romanos, “Laminin coatings on implant surfaces promote osseointegration: Fact or fiction?,” Archives of Oral Biology, vol. 68, pp. 153–161, 2016. View at Publisher · View at Google Scholar
  • Ita Junkar, Mukta Kulkarni, Barbara Drašler, Neža Rugelj, Anca Mazare, Ajda Flašker, Damjana Drobne, Petr Humpoliček, Matic Resnik, Patrik Schmuki, Miran Mozetič, and Aleš Iglič, “Influence of various sterilization procedures on TiO2 nanotubes used for biomedical devices,” Bioelectrochemistry, 2016. View at Publisher · View at Google Scholar
  • Laura Ruiz-Cantu, Andrew Gleadall, Callum Faris, Joel Segal, Kevin Shakesheff, and Jing Yang, “Characterisation of the surface structure of 3D printed scaffolds for cell infiltration and surgical suturing,” Biofabrication, vol. 8, no. 1, pp. 015016, 2016. View at Publisher · View at Google Scholar
  • Sjoerd Leendert Johannes Blok, Gerwin Erik Engels, and Willem van Oeveren, “In vitro hemocompatibility testing: The importance of fresh blood,” Biointerphases, vol. 11, no. 2, pp. 029802, 2016. View at Publisher · View at Google Scholar
  • Maksym Golub, Dieter Lott, Vasil M. Garamus, Daniel Laipple, Michael Stoermer, Erik B. Watkins, Andreas Schreyer, and Regine Willumeit-Römer, “Neutron study of phospholipids 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-ethanolamine spray coating on titanium implants,” Biointerphases, vol. 11, no. 1, pp. 011002, 2016. View at Publisher · View at Google Scholar
  • Jose Guillermo Torres-Rendon, Marius Köpf, David Gehlen, Andreas Blaeser, Horst Fischer, Laura De Laporte, and Andreas Walther, “Cellulose Nanofibril Hydrogel Tubes as Sacrificial Templates for Freestanding Tubular Cell Constructs,” Biomacromolecules, 2016. View at Publisher · View at Google Scholar
  • K. Fukushima, “Poly(trimethylene carbonate)-based polymers engineered for biodegradable functional biomaterials,” Biomater. Sci., vol. 4, no. 1, pp. 9–24, 2016. View at Publisher · View at Google Scholar
  • Xiaojian Wang, Shanqing Xu, Shiwei Zhou, Wei Xu, Martin Leary, Peter Choong, M. Qian, Milan Brandt, and Yi Min Xie, “Topological Design and Additive Manufacturing of Porous Metals for Bone Scaffolds and Orthopaedic Implants: A Review,” Biomaterials, 2016. View at Publisher · View at Google Scholar
  • Ahmet Koluman, Nejat Akar, Umit Y. Malkan, and Ibrahim C. Haznedaroglu, “Qualitative/Chemical Analyses of Ankaferd Hemostat and Its Antioxidant Content in Synthetic Gastric Fluids,” BioMed Research International, vol. 2016, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • Jiao Jiao Li, Seyed-Iman Roohani-Esfahani, Colin R Dunstan, Terrence Quach, Roland Steck, Siamak Saifzadeh, Peter Pivonka, and Hala Zreiqat, “Efficacy of novel synthetic bone substitutes in the reconstruction of large segmental bone defects in sheep tibiae,” Biomedical Materials, vol. 11, no. 1, pp. 015016, 2016. View at Publisher · View at Google Scholar
  • G. Stevenson, S. Rehman, E. Draper, E. Hernández-Nava, J. Hunt, and J.W. Haycock, “Combining 3D human in vitro methods for a 3Rs evaluation of novel titanium surfaces in orthopaedic applications,” Biotechnology and Bioengineering, vol. 113, no. 7, pp. 1586–1599, 2016. View at Publisher · View at Google Scholar
  • I. Aranaz, R. Harris, F. Navarro-García, A. Heras, and N. Acosta, “Chitosan based films as supports for dual antimicrobial release,” Carbohydrate Polymers, 2016. View at Publisher · View at Google Scholar
  • Samaneh Saber-Samandari, Saeed Saber-Samandari, Farnaz Ghonjizade-Samani, Jamshid Aghazadeh, and Ali Sadeghi, “Bioactivity evaluation of novel nanocomposite scaffolds for bone tissue engineering: The impact of hydroxyapatite,” Ceramics International, 2016. View at Publisher · View at Google Scholar
  • Sergey V. Dorozhkin, “Multiphasic calcium orthophosphate (CaPO4) bioceramics and their biomedical applications,” Ceramics International, 2016. View at Publisher · View at Google Scholar
  • Saverio Affatato, Alessandro Ruggiero, Jonathan Salvatore De Mattia, and Paola Taddei, “Does metal transfer affect the tribological behaviour of femoral heads? roughness and phase transformation analyses on retrieved zirconia and Biolox® delta composites,” Composites Part B: Engineering, 2016. View at Publisher · View at Google Scholar
  • Yan Jiao, Xin Pang, and Guangxi Zhai, “Advances in Hyaluronic Acid-Based Drug Delivery Systems,” Current Drug Targets, vol. 17, no. 6, pp. 720–730, 2016. View at Publisher · View at Google Scholar
  • Monica Andrea Serban, “Translational biomaterials—the journey from the bench to the market—think ‘product’,” Current Opinion in Biotechnology, vol. 40, pp. 31–34, 2016. View at Publisher · View at Google Scholar
  • Masako Tsukanaka, Shunsuke Fujibayashi, Mitsuru Takemoto, Tomiharu Matsushita, Tadashi Kokubo, Takashi Nakamura, Kiyoyuki Sasaki, and Shuichi Matsuda, “Bioactive treatment promotes osteoblast differentiation on titanium materials fabricated by selective laser melting technology,” Dental Materials Journal, vol. 35, no. 1, pp. 118–125, 2016. View at Publisher · View at Google Scholar
  • Tarek A. Ahmed, and Bader M. Aljaeid, “Preparation, characterization, and potential application of chitosan, chitosan derivatives, and chitosan metal nanoparticles in pharmaceutical drug de,” Drug Design Development And Therapy, vol. 10, pp. 483–507, 2016. View at Publisher · View at Google Scholar
  • Alexandra Partenhauser, and Andreas Bernkop-Schnürch, “Mucoadhesive polymers in the treatment of dry X syndrome,” Drug Discovery Today, 2016. View at Publisher · View at Google Scholar
  • Janki V. Andhariya, and Diane J. Burgess, “Recent advances in testing of microsphere drug delivery systems,” Expert Opinion on Drug Delivery, pp. 1–16, 2016. View at Publisher · View at Google Scholar
  • Thitirat Chaochai, Yusuke Imai, Tetsuya Furuike, and Hiroshi Tamura, “Preparation and Properties of Gelatin Fibers Fabricated by Dry Spinning,” Fibers, vol. 4, no. 1, pp. 2, 2016. View at Publisher · View at Google Scholar
  • Baozhen Sun, Haizhi Quan, and Fei Zhu, “Dietary chitosan nanoparticles protect crayfish Procambarus clarkii against white spot syndrome virus (WSSV) infection,” Fish & Shellfish Immunology, 2016. View at Publisher · View at Google Scholar
  • Daniele Tartarini, and Elisa Mele, “Adult Stem Cell Therapies for Wound Healing: Biomaterials and Computational Models,” Frontiers in Bioengineering and Biotechnology, vol. 3, 2016. View at Publisher · View at Google Scholar
  • Dominik Duscher, Janos Barrera, Victor W. Wong, Zeshaan N. Maan, Alexander J. Whittam, Michael Januszyk, and Geoffrey C. Gurtner, “Stem Cells in Wound Healing: The Future of Regenerative Medicine? A Mini-Review,” Gerontology, vol. 62, no. 2, pp. 216–225, 2016. View at Publisher · View at Google Scholar
  • Paulo G. Coelho, Ricardo A. Zavanelli, Marcos B. Salles, Sinem Yeniyol, Nick Tovar, and Ryo Jimbo, “Enhanced Bone Bonding to Nanotextured Implant Surfaces at a Short Healing Period,” Implant Dentistry, vol. 25, no. 3, pp. 322–327, 2016. View at Publisher · View at Google Scholar
  • Shifeng Zhang, Changlei Xia, Youming Dong, Yutao Yan, Jianzhang Li, Sheldon Q. Shi, and Liping Cai, “Soy protein isolate-based films reinforced by surface modified cellulose nanocrystal,” Industrial Crops and Products, vol. 80, pp. 207–213, 2016. View at Publisher · View at Google Scholar
  • Baboucarr Lowe, Jayachandran Venkatesan, Sukumaran Anil, Min Suk Shim, and Se-Kwon Kim, “Preparation and characterization of chitosan-natural nano hydroxyapatite-fucoidan nanocomposites for bone tissue engineering,” International Journal of Biological Macromolecules, 2016. View at Publisher · View at Google Scholar
  • Xu Wang, Peng Tang, Yuanwei Xu, Zhipeng Gu, Xu Yang, and Xixun Yu, “In vitro study of strontium doped calcium polyphosphate-modified arteries fixed by dialdehyde carboxymethyl cellulose for vascular scaffolds,” International Journal of Biological Macromolecules, 2016. View at Publisher · View at Google Scholar
  • Jeevithan Elango, Jingyi Zhang, Bin Bao, Krishnamoorthy Palaniyandi, Shujun Wang, Wu Wenhui, and Jeya Shakila Robinson, “Rheological, biocompatibility and osteogenesis assessment of fish collagen scaffold for bone tissue engineering,” International Journal of Biological Macromolecules, 2016. View at Publisher · View at Google Scholar
  • Srinivas Mutalik, Neelam A. Suthar, Renuka S. Managuli, Pallavi K. Shetty, Kiran Avadhani, Guruprasad Kalthur, Raghavendra V. Kulkarni, and Ranjeny Thomas, “Development and performance evaluation of novel nanoparticles of a grafted copolymer loaded with curcumin,” International Journal of Biological Macromolecules, 2016. View at Publisher · View at Google Scholar
  • Tarun Agarwal, Rajan Narayan, Somnath Maji, Shubhanath Behera, Senthilguru Kulanthaivel, Tapas Kumar Maiti, Indranil Banerjee, Kunal Pal, and Supratim Giri, “Gelatin/Carboxymethyl chitosan based scaffolds for dermal tissue engineering applications,” International Journal of Biological Macromolecules, 2016. View at Publisher · View at Google Scholar
  • Peter Panfilov, Dmitry Zaytsev, Olga V. Antonova, Victoria Alpatova, and Larissa P. Kiselnikova, “The Difference of Structural State and Deformation Behavior between Teenage and Mature Human Dentin,” International Journal of Biomaterials, vol. 2016, pp. 1–7, 2016. View at Publisher · View at Google Scholar
  • Davood Almasi, Nida Iqbal, Maliheh Sadeghi, Izman Sudin, Mohammed Rafiq Abdul Kadir, and Tunku Kamarul, “Preparation Methods for Improving PEEK’s Bioactivity for Orthopedic and Dental Application: A Review,” International Journal of Biomaterials, vol. 2016, pp. 1–12, 2016. View at Publisher · View at Google Scholar
  • Samy Tunchel, Alberto Blay, Roni Kolerman, Eitan Mijiritsky, and Jamil Awad Shibli, “3D Printing/Additive Manufacturing Single Titanium Dental Implants: A Prospective Multicenter Study with 3 Years of Follow-Up,” International Journal of Dentistry, vol. 2016, pp. 1–9, 2016. View at Publisher · View at Google Scholar
  • P. Kanmani, K. Kumaresan, J. Aravind, S. Karthikeyan, and R. Balan, “Enzymatic degradation of polyhydroxyalkanoate using lipase from Bacillus subtilis,” International Journal of Environmental Science and Technology, 2016. View at Publisher · View at Google Scholar
  • Bo Yin, Pei Ma, Jun Chen, Hai Wang, Gui Wu, Bo Li, Qiang Li, Zhifeng Huang, Guixing Qiu, and Zhihong Wu, “Hybrid Macro-Porous Titanium Ornamented by Degradable 3D Gel/nHA Micro-Scaffolds for Bone Tissue Regeneration,” International Journal of Molecular Sciences, vol. 17, no. 4, pp. 575, 2016. View at Publisher · View at Google Scholar
  • In-Hye Kim, Jun Sik Son, Bong Ki Min, Young Kyoung Kim, Kyo-Han Kim, and Tae-Yub Kwon, “A simple, sensitive and non-destructive technique for characterizing bovine dental enamel erosion: attenuated total reflection Fourier transform infrared spectroscopy,” International Journal of Oral Science, 2016. View at Publisher · View at Google Scholar
  • Shanka Walia, Supriya Sharma, Pankaj Markand Kulurkar, Vikram Patial, and Amitabha Acharya, “A bimodal molecular imaging probe based on chitosan encapsulated magneto-fluorescent nanocomposite offers biocompatibility, visualization of specific cancer cells in vitro and lung tissues in vivo,” International Journal of Pharmaceutics, vol. 498, no. 1-2, pp. 110–118, 2016. View at Publisher · View at Google Scholar
  • Chih-Hui Yang, Lung-Shuo Wang, Szu-Yu Chen, Mao-Chen Huang, Ya-Hua Li, Yun-Chul Lin, Pei-Fan Chen, Jei-Fu Shaw, and Keng-Shiang Huang, “Microfluidic assisted synthesis of silver nanoparticle-chitosan composite microparticles for antibacterial applications,” International Journal of Pharmaceutics, 2016. View at Publisher · View at Google Scholar
  • P. V. Mayuri, Bhatt Anugya, A. Sabareeswaran, and P. Ramesh, “A novel leukodepletion filter from electrospun poly(ethylene-vinyl alcohol) membranes and evaluation of its efficiency,” International Journal of Polymeric Materials and Polymeric Biomaterials, vol. 65, no. 4, pp. 183–190, 2016. View at Publisher · View at Google Scholar
  • Stefania Corvaglia, Sol Rodriguez, Giuseppe Bardi, Fernando G. Torres, and Daniel Lopez, “Chitin whiskers reinforced carrageenan films as low adhesion cell substrates,” International Journal Of Polymeric Materials And Polymeric Biomaterials, vol. 65, no. 11, pp. 574–580, 2016. View at Publisher · View at Google Scholar
  • A. Kumar, K. C. Nune, L. E. Murr, and R. D. K. Misra, “Biocompatibility and mechanical behaviour of three-dimensional scaffolds for biomedical devices: process-structure-property paradigm,” International Materials Reviews, vol. 61, no. 1, pp. 20–45, 2016. View at Publisher · View at Google Scholar
  • C. Körner, “Additive manufacturing of metallic components by selective electron beam melting — a review,” International Materials Reviews, pp. 1–17, 2016. View at Publisher · View at Google Scholar
  • Feng Zhou, Yu Hui, Yongde Xu, Hongen Lei, Bicheng Yang, Ruili Guan, Zhezhu Gao, Zhongcheng Xin, and Jianquan Hou, “Effects of adipose-derived stem cells plus insulin on erectile function in streptozotocin-induced diabetic rats,” International Urology and Nephrology, 2016. View at Publisher · View at Google Scholar
  • A Sharonova, K Loza, M Surmeneva, R Surmenev, O Prymak, and M Epple, “Synthesis of positively and negatively charged silver nanoparticles and their deposition on the surface of titanium,” IOP Conference Series: Materials Science and Engineering, vol. 116, pp. 012009, 2016. View at Publisher · View at Google Scholar
  • S. Deepthi, Amna A. Abdul Gafoor, A. Sivashanmugam, Shantikumar V. Nair, and R. Jayakumar, “Nanostrontium ranelate incorporated injectable hydrogel enhanced matrix production supporting chondrogenesis in vitro,” J. Mater. Chem. B, 2016. View at Publisher · View at Google Scholar
  • Settimio Pacelli, Vijayan Manoharan, Anna Desalvo, Nikita Lomis, Kartikeya Singh Jodha, Satya Prakash, and Arghya Paul, “Tailoring biomaterial surface properties to modulate host-implant interactions: implication in cardiovascular and bone therapy,” J. Mater. Chem. B, vol. 4, no. 9, pp. 1586–1599, 2016. View at Publisher · View at Google Scholar
  • Y. Y. Sun, S. Gulizia, C. H. Oh, D. Fraser, M. Leary, Y. F. Yang, and M. Qian, “The Influence of As-Built Surface Conditions on Mechanical Properties of Ti-6Al-4V Additively Manufactured by Selective Electron Beam Melting,” Jom, vol. 68, no. 3, pp. 791–798, 2016. View at Publisher · View at Google Scholar
  • M. Rai, A.P. Ingle, S. Gaikwad, I. Gupta, A. Gade, and S. Silvério da Silva, “Nanotechnology based anti-infectives to fight microbial intrusions,” Journal of Applied Microbiology, vol. 120, no. 3, pp. 527–542, 2016. View at Publisher · View at Google Scholar
  • Agnes Aruna John, Saravana Kumar Jaganathan, Eko Supriyanto, Ahmad Zahran Md Khudzari, and Ida Idayu Muhamad, “Novel green surface modification of metallocene polyethylene by steam to enhance its hemocompatible properties,” Journal of Applied Polymer Science, 2016. View at Publisher · View at Google Scholar
  • Francesca Dini, Giovanni Barsotti, Dario Puppi, Alessandra Coli, Angela Briganti, Elisabetta Giannessi, Vincenzo Miragliotta, Carlos Mota, Alessandro Pirosa, Maria R. Stornelli, Paolo Gabellieri, Fabio Carlucci, and Federica Chiellini, “Tailored star poly (epsilon-caprolactone) wet-spun scaffolds for in vivo regeneration of long bone critical size defects,” Journal Of Bioactive And Compatible Polymers, vol. 31, no. 1, pp. 15–30, 2016. View at Publisher · View at Google Scholar
  • Renata Orinakova, Andrej Orinak, Maria Giretova, L'ubomir Medvecky, Miriam Kupkova, Monika Hrubovcakova, Iveta Maskal'ova, Jan Macko, and Frantisek Kal'avsky, “A study of cytocompatibility and degradation of iron-based biodegradable materials,” Journal Of Biomaterials Applications, vol. 30, no. 7, pp. 1060–1070, 2016. View at Publisher · View at Google Scholar
  • Liqun Ning, Yitong Xu, Xiongbiao Chen, and David J. Schreyer, “Influence of mechanical properties of alginate-based substrates on the performance of Schwann cells in culture,” Journal of Biomaterials Science, Polymer Edition, pp. 1–18, 2016. View at Publisher · View at Google Scholar
  • Didarul B. Bhuiyan, John C. Middleton, Rina Tannenbaum, and Timothy M. Wick, “Mechanical properties and osteogenic potential of hydroxyapatite-PLGA-collagen biomaterial for bone regeneration,” Journal of Biomaterials Science, Polymer Edition, pp. 1–16, 2016. View at Publisher · View at Google Scholar
  • Shiuli Pujari-Palmer, Michael Pujari-Palmer, and Marjam Karlsson Ott, “Reduced oxidative stress in primary human cells by antioxidant released from nanoporous alumina,” Journal Of Biomedical Materials Research Part B-Applied Biomaterials, vol. 104, no. 3, pp. 568–575, 2016. View at Publisher · View at Google Scholar
  • Vítor E. Santo, Marta F. Estrada, Sofia P. Rebelo, Sofia C. Abreu, Inês M. Silva, Catarina Pinto, Susana C. Veloso, Ana Teresa Serra, Erwin Boghaert, Paula M. Alves, and Catarina Brito, “Adaptable stirred-tank culture strategies for large scale production of multicellular spheroid-based tumor cell models,” Journal of Biotechnology, 2016. View at Publisher · View at Google Scholar
  • Laurie R. Goodrich, Albert C. Chen, Natasha M. Werpy, Ashley A. Williams, John D. Kisiday, Alvin W. Su, Esther Cory, Paul S. Morley, C. Wayne McIlwraith, Robert L. Sah, and Constance R. Chu, “Addition of Mesenchymal Stem Cells to Autologous Platelet-Enhanced Fibrin Scaffolds in Chondral Defects Does It Enhance Repair?,” Journal Of Bone And Joint Surgery-American Volume, vol. 98A, no. 1, pp. 23–34, 2016. View at Publisher · View at Google Scholar
  • Amy L. Strong, Danielle K. Bennett, Elizabeth B. Spreen, Dhaval V. Adhvaryu, Jeffrey C. Littleton, and Ernest J. Mencer, “Fetal Bovine Collagen Matrix in the Treatment of a Full Thickness Burn Wound,” Journal of Burn Care & Research, vol. 37, no. 3, pp. e292–e297, 2016. View at Publisher · View at Google Scholar
  • Hinojal Zazo, Clara I. Colino, and José M. Lanao, “Current Applications of Nanoparticles in Infectious Diseases,” Journal of Controlled Release, 2016. View at Publisher · View at Google Scholar
  • Martin Baumers, Chris Tuck, Ricky Wildman, Ian Ashcroft, and Richard Hague, “Shape Complexity and Process Energy Consumption in Electron Beam Melting: A Case of Something for Nothing in Additive Manufacturing?,” Journal of Industrial Ecology, 2016. View at Publisher · View at Google Scholar
  • Marios Theodoridis, Dimitrios Dionysopoulos, Eugenia Koliniotou-Koumpia, Pavlos Dionysopoulos, and Paris Gerasimou, “Effect of preheating and shade on surface microhardness of silorane-based composites,” Journal of Investigative and Clinical Dentistry, 2016. View at Publisher · View at Google Scholar
  • Sabrina Royer, Mariana Henriques, Nayara Caroline Camilo, Maria Olívia Pereira, Rosineide Marques Ribas, Margarida Martins, Karinne Spirandelli Carvalho Naves, Rosário Oliveira, Paola Amaral de Campos, Cláudia Botelho, Bruna Fuga Araújo, Deivid William da Fonseca Batistão, and Paulo Pinto Gontijo-Filho, “Biofilm formation of Brazilian meticillin-resistant Staphylococcus aureus strains: prevalence of biofilm determinants and clonal profiles,” Journal of Medical Microbiology, vol. 65, no. 4, pp. 286–297, 2016. View at Publisher · View at Google Scholar
  • Yongjia Xin, Mark W. Bligh, Andrew S. Kinsela, and T. David Waite, “Effect of iron on membrane fouling by alginate in the absence and presence of calcium,” Journal Of Membrane Science, vol. 497, pp. 289–299, 2016. View at Publisher · View at Google Scholar
  • Ana Guadalupe Luque-Alcaraz, Mario Onofre Cortez-Rocha, Carlos Arturo Velázquez-Contreras, Ana Lilian Acosta-Silva, Hisila del Carmen Santacruz-Ortega, Armando Burgos-Hernández, Waldo Manuel Argüelles-Monal, and Maribel Plascencia-Jatomea, “ Enhanced Antifungal Effect of Chitosan/Pepper Tree ( Schinus molle ) Essential Oil Bionanocomposites on the Viability of Aspergillus parasiticus Spores ,” Journal of Nanomaterials, vol. 2016, pp. 1–10, 2016. View at Publisher · View at Google Scholar
  • Ui-Lyong Lee, Jae-Sung Kwon, Su-Heon Woo, and Young-Jun Choi, “Simultaneous Bimaxillary Surgery and Mandibular Reconstruction With a 3-Dimensional Printed Titanium Implant Fabricated by Electron Beam Melting: A Preliminary Mechanical Testing of the Printed Mandible,” Journal of Oral and Maxillofacial Surgery, 2016. View at Publisher · View at Google Scholar
  • Felicia Suska, Göran Kjeller, Peter Tarnow, Eduard Hryha, Lars Nyborg, Anders Snis, and Anders Palmquist, “Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report,” Journal of Oral and Maxillofacial Surgery, 2016. View at Publisher · View at Google Scholar
  • Ita Junkar, Mukta Kulkarni, Barbara Drašler, Neža Rugelj, Nina Recek, Damjana Drobne, Janez Kovač, Petr Humpolicek, Aleš Iglič, and Miran Mozetič, “ Enhanced biocompatibility of TiO 2 surfaces by highly reactive plasma ,” Journal of Physics D: Applied Physics, vol. 49, no. 24, pp. 244002, 2016. View at Publisher · View at Google Scholar
  • S. Ismail, A. S. Ahmed, Reddy Anr, and S. Hamdan, “Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell,” Journal of Renewable Energy, vol. 2016, pp. 1–8, 2016. View at Publisher · View at Google Scholar
  • E. Takematsu, K. Cho, J. Hieda, M. Nakai, K. Katsumata, K. Okada, M. Niinomi, and N. Matsushita, “Adhesive strength of bioactive oxide layers fabricated on TNTZ alloy by three different alkali-solution treatments,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • Widyasri Prananingrum, Yoritoki Tomotake, Yoshihito Naito, Jiyoung Bae, Kazumitsu Sekine, Kenichi Hamada, and Tetsuo Ichikawa, “Application of porous titanium in prosthesis production using a moldless process: Evaluation of physical and mechanical properties with various particle sizes, shapes, and mixing ratios,” Journal of the Mechanical Behavior of Biomedical Materials, 2016. View at Publisher · View at Google Scholar
  • Mehrnaz Namiri, Mohammad Kazemi Ashtiani, Omid Mashinchian, Mohammad Mahdi Hasani-Sadrabadi, Morteza Mahmoudi, Nasser Aghdami, and Hossein Baharvand, “Engineering natural heart valves: possibilities and challenges,” Journal of Tissue Engineering and Regenerative Medicine, 2016. View at Publisher · View at Google Scholar
  • Ahmad Oryan, Esmat Alemzadeh, and Ali Moshiri, “Biological Properties and Therapeutic Activities of Honey in Wound Healing: A narrative review and meta-analysis,” Journal of Tissue Viability, 2016. View at Publisher · View at Google Scholar
  • Yun-Jeong Oh, Soohwang Seok, Sang-Hyeok Lee, Kwang-Mahn Kim, Jae-Sung Kwon, and Bum-Soon Lim, “Evaluation of Physical Properties of Titanium Specimen Fabricated by 3D Printing Technique,” Korean Journal of Dental Materials, vol. 43, no. 1, pp. 29–42, 2016. View at Publisher · View at Google Scholar
  • Christian Pfeifer, Arne Berner, Matthias Koch, Werner Krutsch, Richard Kujat, Peter Angele, Michael Nerlich, and Johannes Zellner, “Higher Ratios of Hyaluronic Acid Enhance Chondrogenic Differentiation of Human MSCs in a Hyaluronic Acid–Gelatin Composite Scaffold,” Materials, vol. 9, no. 5, pp. 381, 2016. View at Publisher · View at Google Scholar
  • Giles Kirby, Lisa White, Roland Steck, Arne Berner, Kristofor Bogoevski, Omar Qutachi, Brendan Jones, Siamak Saifzadeh, Dietmar Hutmacher, Kevin Shakesheff, and Maria Woodruff, “Microparticles for Sustained Growth Factor Delivery in the Regeneration of Critically-Sized Segmental Tibial Bone Defects,” Materials, vol. 9, no. 4, pp. 259, 2016. View at Publisher · View at Google Scholar
  • N. Vanderesse, I. Ky, F. Quevedo González, N. Nuño, and P. Bocher, “Image analysis characterization of periodic porous materials produced by additive manufacturing,” Materials & Design, vol. 92, pp. 767–778, 2016. View at Publisher · View at Google Scholar
  • Volker Weißmann, Rainer Bader, Harald Hansmann, and Nico Laufer, “Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds,” Materials & Design, 2016. View at Publisher · View at Google Scholar
  • Clémence Petit, Eric Maire, Sylvain Meille, Jérôme Adrien, Shingo Kurosu, and Akihiko Chiba, “CoCrMo cellular structures made by Electron Beam Melting studied by local tomography and finite element modelling,” Materials Characterization, 2016. View at Publisher · View at Google Scholar
  • P U Kadakia, E Jain, K R Hixon, C T Eberlin, and S A Sell, “Sonication induced silk fibroin cryogels for tissue engineering applications,” Materials Research Express, vol. 3, no. 5, pp. 055401, 2016. View at Publisher · View at Google Scholar
  • Dimitrios Dionysopoulos, Kosmas Tolidis, and Paris Gerasimou, “The Effect of Composition, Temperature and Post-Irradiation Curing of Bulk Fill Resin Composites on Polymerization Efficiency,” Materials Research-Ibero-American Journal Of Materials, vol. 19, no. 2, pp. 466–473, 2016. View at Publisher · View at Google Scholar
  • Yan Liu, Guofeng Jiang, and Guo He, “Enhancement of entangled porous titanium by BisGMA for load-bearing biomedical applications,” Materials Science & Engineering C-Materials For Biological Applications, vol. 61, pp. 37–41, 2016. View at Publisher · View at Google Scholar
  • Min-Ho Kang, Tae-Sik Jang, Sung Won Kim, Hui-Sun Park, Juha Song, Hyoun-Ee Kim, Kyung-Hwan Jung, and Hyun-Do Jung, “MgF2-coated porous magnesium/alumina scaffolds with improved strength, corrosion resistance, and biological performance for biomedical applications,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Feven Mattews Michael, Mohammad Khalid, Rashmi Walvekar, Chantara Thevy Ratnam, Suganti Ramarad, Humaira Siddiqui, and M.D. Enamul Hoque, “Effect of nanofillers on the physico-mechanical properties of load bearing bone implants,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Divya Arora, Vandna Dhanwal, Debasis Nayak, Ankit Saneja, Hina Amin, Reyaz ur Rasool, Prem Narayan Gupta, and Anindya Goswami, “Preparation, characterization and toxicological investigation of copper loaded chitosan nanoparticles in human embryonic kidney HEK-293 cells,” Materials Science and Engineering: C, vol. 61, pp. 227–234, 2016. View at Publisher · View at Google Scholar
  • Chhavi Sharma, Amit Kumar Dinda, Pravin D. Potdar, Chia-Fu Chou, and Narayan Chandra Mishra, “Fabrication and characterization of novel nano-biocomposite scaffold of chitosan–gelatin–alginate–hydroxyapatite for bone tissue engineering,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Mohammad Mehrasa, Mohammad Ali Asadollahi, Bijan Nasri-Nasrabadi, Kamran Ghaedi, Hossein Salehi, Alireza Dolatshahi-Pirouz, and Ayyoob Arpanaei, “Incorporation of mesoporous silica nanoparticles into random electrospun PLGA and PLGA/gelatin nanofibrous scaffolds enhances mechanical and cell proliferation properties,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Erika S. Ogawa, Adaias O. Matos, Thamara Beline, Isabella S.V. Marques, Cortino Sukotjo, Mathew T. Mathew, Elidiane C. Rangel, Nilson C. Cruz, Marcelo F. Mesquita, Rafael X. Consani, and Valentim A.R. Barão, “Surface-treated commercially pure titanium for biomedical applications: Electrochemical, structural, mechanical and chemical characterizations,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar
  • Sandipan Roy, Niloy Khutia, Debdulal Das, Mitun Das, Vamsi Krishna Balla, Amit Bandyopadhyay, and Amit Roy Chowdhury, “Understanding compressive deformation behavior of porous Ti using finite element analysis,” Materials Science and Engineering: C, 2016. View at Publisher · View at Google Scholar