About this Journal Submit a Manuscript Table of Contents

Citations to this Journal [135 citations: 1–100 of 123 articles]

Articles published in International Journal of Corrosion have been cited 135 times. The following is a list of the 123 articles that have cited the articles published in International Journal of Corrosion.

  • B.S. Yilbas, I. Toor, C. Karatas, J. Malik, and I. Ovali, “Laser treatment of dual matrix structured cast iron surface: Corrosion resistance of surface,” Optics and Lasers in Engineering, vol. 64, pp. 17–22, 2015. View at Publisher · View at Google Scholar
  • N.I. Poliak, V.M. Anishchik, N.G. Valko, C. Karwat, C. Kozak, and M. Opielak, “Mechanical Properties of Zn-Ni-SiO_2 Coating Deposited under X-ray Irradiation,” Acta Physica Polonica A, vol. 125, no. 6, pp. 1415–1417, 2014. View at Publisher · View at Google Scholar
  • Xiaojian Wang, and Cuie Wen, “Corrosion protection of mesoporous bioactive glass coating on biodegradable magnesium,” Applied Surface Science, 2014. View at Publisher · View at Google Scholar
  • V. Trunova, V. Zvereva, N. Polosmak, D. Kochubey, V. Kriventsov, and K. Kuper, “Investigation of Organic Materials From the ‘Royal’ Burials of Xiongnu (Noin-Ula, Mongolia) by Srxrf and XAFS Methods,” Archaeometry, 2014. View at Publisher · View at Google Scholar
  • Anne Chabas, Stéphane Alfaro, Tiziana Lombardo, Aurélie Verney-Carron, Estifania Da Silva, Sylvain Triquet, Hélène Cachier, and Eric Leroy, “Long term exposure of self-cleaning and reference glass in an urban environment: a comparative assessment,” Building and Environment, 2014. View at Publisher · View at Google Scholar
  • Niteen Jadhav, and Victoria J. Gelling, “Synthesis and Characterization of Micaceous Iron Oxide/Polypyrrole Composite Pigments and Their Application for Corrosion Protection of Cold-Rolled Steel,” Corrosion, vol. 70, no. 5, pp. 464–474, 2014. View at Publisher · View at Google Scholar
  • Ayşe Ongun Yüce, Başak Doğru Mert, Gülfeza Kardaş, and Birgül Yazıcı, “Electrochemical and quantum chemical studies of 2-amino-4-methyl-thiazole as corrosion inhibitor for mild steel in HCl solution,” Corrosion Science, 2014. View at Publisher · View at Google Scholar
  • M. Morcillo, I. Díaz, B. Chico, H. Cano, and D. de la Fuente, “Weathering Steels: From Empirical Development To Scientific Design. A Review,” Corrosion Science, 2014. View at Publisher · View at Google Scholar
  • Heidis Cano, Delphine Neff, Manuel Morcillo, Philippe Dillmann, Iván Diaz, and Daniel de la Fuente, “Characterization of corrosion products formed on Ni 2.4 %wt – Cu 0.5 %wt – Cr 0.5 %wt weathering steel exposed in marine atmospheres,” Corrosion Science, 2014. View at Publisher · View at Google Scholar
  • Razieh Moosavi, Tayyebeh Madrakian, Hassan Keypour, Ameneh Ramezani-Aktij, and Misagh Mirzaei-Monsef, “Construction and Application of an Electrochemical Sensor for Simultaneous Determination of Cd( II), Cu( II) and Hg( II) in Water and Foodstuff Samples,” Electroanalysis, vol. 26, no. 4, pp. 786–795, 2014. View at Publisher · View at Google Scholar
  • A. D. King, N. Birbilis, and J. R. Scully, “Accurate Electrochemical Measurement of Magnesium Corrosion Rates; a Combined Impedance, Mass-Loss and Hydrogen Collection Study,” Electrochimica Acta, vol. 121, pp. 394–406, 2014. View at Publisher · View at Google Scholar
  • Doddahosuru M. Gurudatt, and Kikkeri N. Mohana, “Synthesis of New Pyridine Based 1,3,4-Oxadiazole Derivatives and their Corrosion Inhibition Performance on Mild Steel in 0.5 M Hydrochloric Acid,” Industrial & Engineering Chemistry Research, pp. 140131085019001, 2014. View at Publisher · View at Google Scholar
  • Prasanna B. Matad, Praveen B. Mokshanatha, Narayana Hebbar, Venkatarangaiah T. Venkatesha, and Harmesh Chander Tandon, “Ketosulfone Drug as a Green Corrosion Inhibitor for Mild Steel in Acidic Medium,” Industrial & Engineering Chemistry Research, pp. 140509105403004, 2014. View at Publisher · View at Google Scholar
  • Renato Altobelli Antunes, Rodrigo Uchida Ichikawa, Luis Gallego Martinez, and Isolda Costa, “Characterization of Corrosion Products on Carbon Steel Exposed to Natural Weathering and to Accelerated Corrosion Tests,” International Journal of Corrosion, vol. 2014, pp. 1–9, 2014. View at Publisher · View at Google Scholar
  • D. R. Gunasegaram, and M. S. Venkatraman, “Towards multiscale modelling of localised corrosion,” International Materials Reviews, vol. 59, no. 2, pp. 84–114, 2014. View at Publisher · View at Google Scholar
  • D Saidi, B Zaid, N Souami, M Negache, and A Si Ahmed, “Microstructure and fracture mode of a martensitic stainless steel steam turbine blade characterized via scanning auger microscopy and potentiodynamic polarization,” IOP Conference Series: Materials Science and Engineering, vol. 60, pp. 012004, 2014. View at Publisher · View at Google Scholar
  • J. C. Valle-Quitana, G. F. Dominguez-Patiño, and J. G. Gonzalez-Rodriguez, “Corrosion Inhibition of Carbon Steel in 0.5 M H2SO4 by Phtalocyanine Blue,” ISRN Corrosion, vol. 2014, pp. 1–8, 2014. View at Publisher · View at Google Scholar
  • Jianhong Dai, Yan Song, and Rui Yang, “Influences of alloying elements and oxygen on the stability and elastic properties of Mg17Al12,” Journal of Alloys and Compounds, vol. 595, pp. 142–147, 2014. View at Publisher · View at Google Scholar
  • Mohd Rashid, Suhail Sabir, Afidah A. Rahim, and Umesh Waware, “Polyaniline/Palm Oil Blend for Anticorrosion of Mild Steel in Saline Environment,” Journal of Applied Chemistry, vol. 2014, pp. 1–6, 2014. View at Publisher · View at Google Scholar
  • Pravin P. Deshpande, Niteen G. Jadhav, Victoria J. Gelling, and Dimitra Sazou, “Conducting polymers for corrosion protection: a review,” Journal of Coatings Technology and Research, vol. 11, no. 4, pp. 473–494, 2014. View at Publisher · View at Google Scholar
  • Saviour Umoren, Ime Bassey Obot, Zuhair Gasem, and Nurudeen Adewale Odewunmi, “Experimental and Theoretical Studies of Red Apple Fruit Extract as Green Corrosion Inhibitor for Mild Steel in HCl Solution,” Journal of Dispersion Science and Technology, pp. 140529131846007, 2014. View at Publisher · View at Google Scholar
  • M. Proy, M. V. Utrilla, E. Otero, B. Bouchaud, and F. Pedraza, “Effects of Grit Blasting and Annealing on the High-Temperature Oxidation Behavior of Austenitic and Ferritic Fe-Cr Alloys,” Journal of Materials Engineering and Performance, 2014. View at Publisher · View at Google Scholar
  • W. Rashmi, A. F. Ismail, M. Khalid, A. Anuar, and T. Yusaf, “Investigating corrosion effects and heat transfer enhancement in smaller size radiators using CNT-nanofluids,” Journal of Materials Science, vol. 49, no. 13, pp. 4544–4551, 2014. View at Publisher · View at Google Scholar
  • Meng Liu, Wei Ke, and En-Hou Han, “Corrosion Behavior of X52 Anti-H2S Pipeline Steel Exposed to High H2S Concentration Solutions at 90 degrees C,” Journal of Materials Science & Technology, vol. 30, no. 5, pp. 504–510, 2014. View at Publisher · View at Google Scholar
  • A. S. Fouda, A. A. Attia, and A. A. Negm, “Some Thiophene Derivatives as Corrosion Inhibitors for Carbon Steel in Hydrochloric Acid,” Journal of Metallurgy, vol. 2014, pp. 1–15, 2014. View at Publisher · View at Google Scholar
  • Pieter Samyn, “Corrosion Protection of Aluminum by Hydrophobization Using Nanoparticle Polymer Coatings Containing Plant Oil,” Journal of The Brazilian Chemical Society, vol. 25, no. 5, pp. 947–960, 2014. View at Publisher · View at Google Scholar
  • Zhong-ying Han, Xiao-guang Huang, Yu-guang Cao, and Jin-quan Xu, “A nonlinear cumulative evolution model for corrosion fatigue damage,” Journal of Zhejiang University SCIENCE A, vol. 15, no. 6, pp. 447–453, 2014. View at Publisher · View at Google Scholar
  • Mustafa Abdulstaar, Mansour Mhaede, Lothar Wagner, and Manfred Wollmann, “Corrosion behaviour of Al 1050 severely deformed by rotary swaging,” Materials & Design, 2014. View at Publisher · View at Google Scholar
  • Takahiro Hashimoto, Takuya Moronaga, and Yasuyuki Kaneno, “V content reduced dual two-phase Ni3Al-Ni3V intermetallic alloys,” Materials Science and Engineering A-Structural Materials Properties Microst, vol. 596, pp. 207–215, 2014. View at Publisher · View at Google Scholar
  • Hugo F. Lopez, and Haiying Zhang, “The Effect of Particle Size on the Oxidation Resistance of a Nanoceria-Coated 304 Stainless Steel,” Metallurgical and Materials Transactions A, 2014. View at Publisher · View at Google Scholar
  • YanHua Lei, Nan Sheng, Atsushi Hyono, Mikito Ueda, and Toshiaki Ohtsuka, “Influence of pH on the synthesis and properties of polypyrrole on copper from phytic acid solution for corrosion protection,” Progress in Organic Coatings, 2014. View at Publisher · View at Google Scholar
  • M. Yeganeh, M. Saremi, and H. Rezaeyan, “Corrosion inhibition of steel using mesoporous silica nanocontainers incorporated in the polypyrrole,” Progress in Organic Coatings, vol. 77, no. 9, pp. 1428–1435, 2014. View at Publisher · View at Google Scholar
  • Nan Sheng, Yanhua Lei, Atsushi Hyonoo, Mikito Ueda, and Toshiaki Ohtsuka, “Improvement of polypyrrole films for corrosion protection of zinc-coated AZ91D alloy,” Progress in Organic Coatings, 2014. View at Publisher · View at Google Scholar
  • R. T. Loto, C. A. Loto, and T. Fedotova, “Electrochemical studies of mild steel corrosion inhibition in sulfuric acid chloride by aniline,” Research on Chemical Intermediates, vol. 40, no. 4, pp. 1501–1516, 2014. View at Publisher · View at Google Scholar
  • Alexander V. Perig, and Nikolai N. Golodenko, “CFD 2D simulation of viscous flow during ECAE through a rectangular die with parallel slants,” The International Journal of Advanced Manufacturing Technology, 2014. View at Publisher · View at Google Scholar
  • Christopher D. Taylor, “The Oxidation of Technetium Metal as Simulated by First-Principles,” The Journal of Physical Chemistry C, pp. 140417112339000, 2014. View at Publisher · View at Google Scholar
  • Esam Husain, Tharangattu N. Narayanan, Jose Jaime Taha-Tijerina, Soumya Vinod, Robert Vajtai, and Pulickel M. Ajayan, “Marine Corrosion Protective Coatings of Hexagonal Boron Nitride Thin Films on Stainless Steel,” Acs Applied Materials & Interfaces, vol. 5, no. 10, pp. 4129–4135, 2013. View at Publisher · View at Google Scholar
  • Olga Lebedeva, Gilyana Dzhungurova, Alexandre Zakharov, Dmitry Kultin, Leonid Kustov, Vladimir Krasovskii, Konstantin Kalmykov, and Sergey Dunaev, “Surface State of Sacrificial Copper Electrode by Electropolishing in Hydrophobic Ionic Liquid 1-Butyl-3-rnethylimidazolium bis(trifluoromethylsulfonyl)imide,” Acs Applied Materials & Interfaces, vol. 5, no. 21, pp. 10551–10558, 2013. View at Publisher · View at Google Scholar
  • Aliaksandr S. Bandarenka, “Exploring the interfaces between metal electrodes and aqueous electrolytes with electrochemical impedance spectroscopy,” Analyst, vol. 138, no. 19, pp. 5540–5554, 2013. View at Publisher · View at Google Scholar
  • Denis M. Strachan, Jarrod V. Crum, Joseph V. Ryan, and Alberta Silvestri, “Characterization and modeling of the cemented sediment surrounding the Iulia Felix glass,” Applied Geochemistry, 2013. View at Publisher · View at Google Scholar
  • Hela Hassairi, Latifa Bousselmi, Slim Khosrof, and Ezzeddine Triki, “Evaluation of the inhibitive effect of benzotriazole on archeological bronze in acidic medium,” Applied Physics A-Materials Science & Processing, vol. 113, no. 4, pp. 923–931, 2013. View at Publisher · View at Google Scholar
  • Mahmoud M. Abdel Daiem, Jose Rivera-Utrilla, Raul Ocampo-Perez, Manuel Sanchez-Polo, and Jesus J. Lopez-Penalver, “Treatment of water contaminated with diphenolic acid by gamma radiation in the presence of different compounds,” Chemical Engineering Journal, vol. 219, pp. 371–379, 2013. View at Publisher · View at Google Scholar
  • Leonard D. Tijing, Michael Tom G. Ruelo, Chan-Hee Park, Altangerel Amarjargal, Han Joo Kim, Hem Raj Pant, Dong-Hwan Lee, and Cheol Sang Kim, “Efficacy of zinc and tourmaline in mitigating corrosion of carbon steel in non-flow mode,” Chemical Papers, 2013. View at Publisher · View at Google Scholar
  • Ying Huo, Mike Yongjun Tan, and Li Shu, “Effects of high salt concentration and residue on copper and aluminum corrosion,” Chemical Research in Chinese Universities, vol. 29, no. 3, pp. 538–544, 2013. View at Publisher · View at Google Scholar
  • Simoni Triantafyllidou, and Marc Edwards, “In situ remediation of leaks in potable water supply systems,” Corrosion Reviews, vol. 31, no. 3-6, pp. 105–122, 2013. View at Publisher · View at Google Scholar
  • M. Morcillo, B. Chico, I. Díaz, H. Cano, and D. de la Fuente, “Atmospheric corrosion data of weathering steels. A review,” Corrosion Science, 2013. View at Publisher · View at Google Scholar
  • Djamel Daoud, Tahar Douadi, Saifi Issaadi, and Salah Chafaa, “Adsorption and corrosion inhibition of new synthesized thiophene Schiff base on mild steel X52 in HCl and H2SO4 solutions,” Corrosion Science, 2013. View at Publisher · View at Google Scholar
  • Michael Tom G. Ruelo, Leonard D. Tijing, Altangerel Amarjargal, Chan-Hee Park, Han Joo Kim, Hem Raj Pant, Dong Hwan Lee, and Cheol Sang Kim, “Assessing the effect of catalytic materials on the scaling of carbon steel,” Desalination, vol. 313, pp. 189–198, 2013. View at Publisher · View at Google Scholar
  • Jiang Qiong, Miao Qiang, Liang Wen-ping, Ying Feng, Tong Fei, Xu Yi, Ren Bei-lei, Zhang Ping-ze, and Yao Zheng-jun, “Corrosion behavior of arc sprayed Al-Zn-Si-RE coatings on mild steel in 3.5 wt% NaCl solution,” Electrochimica Acta, 2013. View at Publisher · View at Google Scholar
  • A. Alvarez-Pampliega, T. Hauffman, M. Petrova, T. Breugelmans, T. Muselle, K. Van den Bergh, J. De Strycker, H. Terryn, and A. Hubin, “Corrosion Study on Al-rich Metal-Coated Steel by Odd Random Phase Multisine Electrochemical Impedance Spectroscopy,” Electrochimica Acta, 2013. View at Publisher · View at Google Scholar
  • Shaily M. Bhola, Rahul Bhola, Faisal M. Alabbas, John R. Spear, Brajendra Mishra, David L. Olson, and Anthony E. Kakpovbia, “Neem Extract as an Inhibitor for Biocorrosion Influenced By Sulfate Reducing Bacteria: A Preliminary Investigation,” Engineering Failure Analysis, 2013. View at Publisher · View at Google Scholar
  • Aisha Mahmood Al-Turkustani, “Thermodynamic, chemical and electrochemical investigation of pandanus tectorius extract as corrosion inhibitor for steel in sulfuric acid solutions,” European Journal of Chemistry, vol. 4, no. 3, pp. 303–310, 2013. View at Publisher · View at Google Scholar
  • C.A. Loto, O.O. Joseph, and R.T. Loto, “ Inhibition effect of Vernonia amygdalina extract on the corrosion of mild steel reinforcement in concrete in 0.2 M H 2 SO 4 Environment ,” European Journal of Environmental and Civil Engineering, pp. 1–13, 2013. View at Publisher · View at Google Scholar
  • John D. Vienna, Joseph V. Ryan, Stephane Gin, and Yaohiro Inagaki, “Current Understanding and Remaining Challenges in Modeling Long-Term Degradation of Borosilicate Nuclear Waste Glasses,” International Journal of Applied Glass Science, vol. 4, no. 4, pp. 283–294, 2013. View at Publisher · View at Google Scholar
  • Inemesit A. Akpan, and Nnanake-Abasi O. Offiong, “Inhibition of Mild Steel Corrosion in Hydrochloric Acid Solution by Ciprofloxacin Drug,” International Journal of Corrosion, vol. 2013, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  • Manish Gupta, Jyotsna Mishra, and K. S. Pitre, “Corrosion and Inhibition Effects of Mild Steel in Hydrochloric Acid Solutions Containing Organophosphonic Acid,” International Journal of Corrosion, vol. 2013, pp. 1–5, 2013. View at Publisher · View at Google Scholar
  • Deepa Prabhu, and Padmalatha Rao, “Garcinia indica as an Environmentally Safe Corrosion Inhibitor for Aluminium in 0.5 M Phosphoric Acid,” International Journal of Corrosion, vol. 2013, pp. 1–11, 2013. View at Publisher · View at Google Scholar
  • M. K. Pavithra, T. V. Venkatesha, and M. K. Punith Kumar, “Inhibiting Effects of Rabeprazole Sulfide on the Corrosion of Mild Steel in Acidic Chloride Solution,” International Journal of Electrochemistry, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Carmina Menchaca-Campos, César García-Pérez, Iván Castañeda, Miguel A. García-Sánchez, René Guardián, and Jorge Uruchurtu, “Nylon/Graphene Oxide Electrospun Composite Coating,” International Journal of Polymer Science, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Marco Hernández-Escampa, Fausto Rodríguez-Acuña, Franco Millán-Cruz, Pilar Rodríguez-Rojas, Miguel Hernández-Gallegos, Alba Covelo, Carmina Menchaca-Campos, and Jorge Uruchurtu, “Electrochemical Evaluation of a Recycled Copolymer Coating for Cultural Heritage Conservation Purposes,” International Journal of Polymer Science, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • Christopher A. Walton, M.F. Horstemeyer, Holly J. Martin, and D.K. Francis, “Formulation of a Macroscale Corrosion Damage Internal State Variable Model,” International Journal of Solids and Structures, 2013. View at Publisher · View at Google Scholar
  • I. Y. Suleiman, O. B. Oloche, and S. A. Yaro, “The Development of a Mathematical Model for the Prediction of Corrosion Rate Behaviour for Mild Steel in 0.5 M Sulphuric Acid,” ISRN Corrosion, vol. 2013, pp. 1–9, 2013. View at Publisher · View at Google Scholar
  • P. Muhamed Ashraf, and Leela Edwin, “Corrosion behaviour of nanometre sized cerium oxide and titanium oxide incorporated aluminium in NaCl solution,” Journal Of Alloys And Compounds, vol. 548, pp. 82–88, 2013. View at Publisher · View at Google Scholar
  • Filippo Ronzani, Nathalie Costarramone, Sylvie Blanc, Abdelhamid Khalil Benabbou, Mickaël Le Bechec, Thierry Pigot, Michael Oelgemöller, and Sylvie Lacombe, “Visible-light photosensitized oxidation of α-terpinene using novel silica-supported sensitizers: Photooxygenation vs. photodehydrogenation,” Journal of Catalysis, vol. 303, pp. 164–174, 2013. View at Publisher · View at Google Scholar
  • S. Alarmal Mangai, and Subban Ravi, “Comparative Corrosion Inhibition Effect of Imidazole Compounds and of Trichodesma indicum (Linn) R. Br. on C38 Steel in 1 M HCl Medium,” Journal of Chemistry, vol. 2013, pp. 1–4, 2013. View at Publisher · View at Google Scholar
  • Ferhat Karaca, “Mapping the corrosion impact of air pollution on the historical peninsula of Istanbul,” Journal of Cultural Heritage, vol. 14, no. 2, pp. 129–137, 2013. View at Publisher · View at Google Scholar
  • Daniel de la Fuente, Jesús Manuel Vega, Fernando Viejo, Iván Díaz, and Manuel Morcillo, “Mapping air pollution effects on atmospheric degradation of cultural heritage,” Journal of Cultural Heritage, vol. 14, no. 2, pp. 138–145, 2013. View at Publisher · View at Google Scholar
  • Deepa Prabhu, and Padmalatha Rao, “Coriandrum sativum L. - A novel green inhibitor for the corrosion inhibition of aluminum in 1.0M phosphoric acid solution,” Journal of Environmental Chemical Engineering, 2013. View at Publisher · View at Google Scholar
  • S.A. Umoren, I.B. Obot, A.U. Israel, P.O. Asuquo, M.M. Solomon, U.M. Eduok, and A.P. Udoh, “Inhibition of Mild Steel Corrosion in Acidic Medium Using Coconut Coir Dust Extracted From Water and Methanol as Solvents,” Journal of Industrial and Engineering Chemistry, 2013. View at Publisher · View at Google Scholar
  • Susan Caines, Faisal Khan, and John Shirokoff, “Analysis of Pitting Corrosion on Steel Under Insulation in Marine Environments,” Journal of Loss Prevention in the Process Industries, 2013. View at Publisher · View at Google Scholar
  • A. K. Lakshminarayanan, and V. Balasubramanian, “Use of DL-EPR Test to Assess Sensitization Resistance of AISI 409M Grade Ferritic Stainless Steel Joints,” Journal of Materials Engineering and Performance, 2013. View at Publisher · View at Google Scholar
  • V. Villaret, F. Deschaux-Beaume, C. Bordreuil, S. Rouquette, and C. Chovet, “Influence of filler wire composition on weld microstructures of a 444 ferritic stainless steel grade,” Journal of Materials Processing Technology, vol. 213, no. 9, pp. 1538–1547, 2013. View at Publisher · View at Google Scholar
  • A. Barnabé, A. Chapelle, L. Presmanes, and P. Tailhades, “Copper and iron based thin film nanocomposites prepared by radio frequency sputtering. Part I: elaboration and characterization of metal/oxide thin film nanocomposites using controlled in situ reduction process,” Journal of Materials Science, vol. 48, no. 9, pp. 3386–3394, 2013. View at Publisher · View at Google Scholar
  • B. Ratna Sunil, T. S. Sampath Kumar, Uday Chakkingal, V. Nandakumar, and Mukesh Doble, “Nano-hydroxyapatite reinforced AZ31 magnesium alloy by friction stir processing: a solid state processing for biodegradable metal matrix composites,” Journal of Materials Science: Materials in Medicine, 2013. View at Publisher · View at Google Scholar
  • Boris Remenec, Silvia Dulanska, and L'ubomir Matel, “Determination of difficult to measure radionuclides in primary circuit facilities of NPP V1 Jaslovske Bohunice,” Journal of Radioanalytical and Nuclear Chemistry, vol. 298, no. 3, pp. 1879–1884, 2013. View at Publisher · View at Google Scholar
  • Igor M. Svishchev, Dimitrios T. Kallikragas, and Andriy Yu. Plugatyr, “Molecular dynamics simulations of supercritical water at the iron hydroxide surface,” Journal of Supercritical Fluids, vol. 78, pp. 7–11, 2013. View at Publisher · View at Google Scholar
  • Hongbo Cong, and John R. Scully, “Effects of Aluminum Solids on the under Deposit Corrosion of Copper in Synthetic Potable Water: The Arguments for and against a Semi-Permeable Membrane,” Journal of The Electrochemical Society, vol. 160, no. 9, pp. C403–C413, 2013. View at Publisher · View at Google Scholar
  • M. B. M. C. Felipe, D. R. Silva, M. A. M. Maciel, C. A. Martinez-Huitle, and S. R. B. Medeiros, “Effectiveness of Croton cajucara Benth on corrosion inhibition of carbon steel in saline medium,” Materials And Corrosion-Werkstoffe Und Korrosion, vol. 64, no. 6, pp. 530–534, 2013. View at Publisher · View at Google Scholar
  • E. Bentiss, A. El Bribri, M. Tabyaoui, H. El Attari, and B. Tabyaoui, “The use of Euphorbia falcata extract as eco-friendly corrosion inhibitor of carbon steel in hydrochloric acid solution,” Materials Chemistry And Physics, vol. 141, no. 1, pp. 240–247, 2013. View at Publisher · View at Google Scholar
  • P. Montoya, I. Díaz, N. Granizo, D. de la Fuente, and M. Morcillo, “An study on accelerated corrosion testing of weathering steel,” Materials Chemistry and Physics, 2013. View at Publisher · View at Google Scholar
  • O. Moscoso-Londoño, M.S. Carrião, C. Cosio-Castañeda, V. Bilovol, R. Martínez Sánchez, E.J. Lede, L.M. Socolovsky, and R. Martínez-García, “One-step room temperature synthesis of very small γ-Fe2O3 nanoparticles,” Materials Research Bulletin, 2013. View at Publisher · View at Google Scholar
  • B. Reinhold, D. Bluecher, and M. Korte, “Challenge of joining and surface technologies for light weight constructions in automobile applications,” Materialwissenschaft Und Werkstofftechnik, vol. 44, no. 1, pp. 58–69, 2013. View at Publisher · View at Google Scholar
  • Harry Yosh, “Statistical model of stress corrosion cracking based on extended form of Dirichlet energy,” Pramana, 2013. View at Publisher · View at Google Scholar
  • A. Madhankumar, and N. Rajendran, “Poly(m-phenylendiamine-co-o-aminophenol) coatings on mild steel: Effect of comonomers feed ratio on surface and corrosion protection aspects,” Progress in Organic Coatings, 2013. View at Publisher · View at Google Scholar
  • Miloš D. Tomić, Branko Dunjić, Violeta Likić, Jelena Bajat, Jelena Rogan, and Jasna Djonlagić, “The use of nanoclay in preparation of epoxy anticorrosive coatings,” Progress in Organic Coatings, 2013. View at Publisher · View at Google Scholar
  • K. K. Anupama, and Joseph Abraham, “Electroanalytical studies on the corrosion inhibition behavior of guava (Psidium guajava) leaves extract on mild steel in hydrochloric acid,” Research on Chemical Intermediates, vol. 39, no. 9, pp. 4067–4080, 2013. View at Publisher · View at Google Scholar
  • J. Cervantes, A. Barba, M. A. Hernandez, J. Salas, J. L. Espinoza, C. Denova, G. Torres-Villasenor, A. Conde, A. Covelo, and R. Valdez, “Development of Zn-Al-Cu coatings by hot dip coated technology: preparation and characterization,” Revista de Metalurgia, vol. 49, no. 5, pp. 351–359, 2013. View at Publisher · View at Google Scholar
  • Moussa Tamboura, Anna M. Mikhailova, and Meng Qiu Jia, “A Comparative Study of Anticorrosion Paints Based on Silicone-Urethane Binders: a Multilayer Primer,” Silicon, 2013. View at Publisher · View at Google Scholar
  • Guichang Liu, Zongxiang Huang, Lida Wang, Wen Sun, Suilin Wang, and Xinlv Deng, “Effects of Ce4+ on the structure and corrosion resistance of electroless deposited Ni–Cu–P coating,” Surface and Coatings Technology, vol. 222, pp. 25–30, 2013. View at Publisher · View at Google Scholar
  • A.S. Gnedenkov, S.L. Sinebryukhov, D.V. Mashtalyar, and S.V. Gnedenkov, “Features of the corrosion processes development at the magnesium alloys surface,” Surface and Coatings Technology, vol. 225, pp. 112–118, 2013. View at Publisher · View at Google Scholar
  • Sanat Wagle, Yasuyuki Kaneno, Rokuro Nishimura, and Takayuki Takasugi, “Evaluation of the wear properties of dual two-phase Ni3Al/Ni3V intermetallic alloys,” Tribology International, 2013. View at Publisher · View at Google Scholar
  • Stjepan Spalj, Magda Mlacovic Zrinski, Vedrana Tudor Spalj, and Zorana Ivankovic Buljan, “In-vitro assessment of oxidative stress generated by orthodontic archwires,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 141, no. 5, pp. 583–589, 2012. View at Publisher · View at Google Scholar
  • Ambrish Singh, Vinod Kumar Singh, and M. A. Quraishi, “Inhibition of Mild Steel Corrosion in HCl Solution Using Pipali (Piper longum) Fruit Extract,” Arabian Journal for Science and Engineering, vol. 38, no. 1, pp. 85–97, 2012. View at Publisher · View at Google Scholar
  • Johan Tidblad, “Atmospheric corrosion of metals in 2010–2039 and 2070–2099,” Atmospheric Environment, vol. 55, pp. 1–6, 2012. View at Publisher · View at Google Scholar
  • A. Verney-Carron, A. L. Dutot, T. Lombardo, and A. Chabas, “Predicting changes of glass optical properties in polluted atmospheric environment by a neural network model,” Atmospheric Environment, vol. 54, pp. 141–148, 2012. View at Publisher · View at Google Scholar
  • Martin Ferm, and Sofie Hellsten, “Trends in atmospheric ammonia and particulate ammonium concentrations in Sweden and its causes,” Atmospheric Environment, vol. 61, pp. 30–39, 2012. View at Publisher · View at Google Scholar
  • Ambrish Singh, I. Ahamad, D. K. Yadav, V. K. Singh, and M. A. Quraishi, “The Effect of Environmentally Benign Fruit Extract of Shahjan (Moringa oleifera) on the Corrosion of Mild Steel in Hydrochloric Acid Solution,” Chemical Engineering Communications, vol. 199, no. 1, pp. 63–77, 2012. View at Publisher · View at Google Scholar
  • Amal Bakr Shori, “Changes of hemoglobin content and glucose levels in the blood of Rattus norvegicus by water extracts of Azadirachta indica,” Chinese Journal of Natural Medicines, vol. 10, no. 2, pp. 135–137, 2012. View at Publisher · View at Google Scholar
  • H.J. Martin, R.B. Alvarez, J. Danzy, M.F. Horstemeyer, and P.T. Wang, “Quantification of Corrosion Pitting Under Immersion and Salt Spray Environments on an As-Cast AM60 Magnesium Alloy,” Corrosion, vol. 68, no. 6, pp. 571–585, 2012. View at Publisher · View at Google Scholar
  • Christopher A. Walton, Holly J. Martin, M.F. Horstemeyer, and Paul T. Wang, “Quantification of corrosion mechanisms under immersion and salt-spray environments on an extruded AZ31 magnesium alloy,” Corrosion Science, vol. 56, pp. 194–208, 2012. View at Publisher · View at Google Scholar