Research Article
Microleakage after Thermocycling of Three Self-Etch Adhesives under Resin-Modified Glass-Ionomer Cement Restorations
Table 2
Composition of biomaterials used in the present study.
| | Biomaterials | Components |
| | Dentin conditioner | – Distilled water (90%) | | (GC Tokyo, Japan) | – Polyacrylic acid (10%) |
| | Liquid: | | – Distilled water | | – Polyacrylic acid | | Fuji II LC | – 2-hydroxyethyl methacrylate (HEMA) | | (GC Tokyo, Japan) | – Urethane dimethacrylate | | – Camphorquinone | | Powder: | | Fluoro alumino silicate glass |
| | Liquid A: | | – 2-hydroxyethyl methacrylate (HEMA) | | – Purified water | | – Ethanol | | – Butylated hydoxy toluene (BHT) | | – Highly dispersated silicon dioxide | | Xeno III | Liquid B: | | (Densply Detrey GmbH, Konstanz, Germany) | – Phosphoric acid modified methacrylate (Pyro-EMA) | | – Mono fluoro phosphazene modified methacrylate | | – Urethane dimethacrylate | | – Butylated hydoxy toluene (BHT) | | – Camphorquinone | | – Ethyl-4-dimethylaminobenzoate |
| | iBond experimental | Unknown | | (Heraeus Kulzer GmbH & Co. KG, Hanau, Germany) |
| | Liquid 1 (red blister): | | – Methacrylated phosphoric esters | | – Bis-GMA | | – Camphorquinone | | Adper Prompt-L-Pop | – Stabilizers | | (3M ESPE AG, dental products, Seefeld, Germany) | Liquid 2 (yellow blister): | | – Water | | – 2-hydroxyethyl methacrylate (HEMA) | | – Polyalkenoic acid | | – Stabilizers |
|
|
