Review of Environmental and Geological Microgravity Applications and Feasibility of Its Employment at Archaeological Sites in Israel

Eppelbaum, Lev V.

doi:https://doi.org/10.1155/2011/927080

International Journal of Geophysics

On this page

Abstract Introduction Conclusions Acknowledgments References Copyright Related Articles

Special Issue

Noninvasive Sensing Techniques and Geophysical Methods for Cultural Heritage and Civil Infrastructures Monitoring

View this Special Issue

Review Article | Open Access

Volume 2011 | Article ID 927080 | https://doi.org/10.1155/2011/927080

Review of Environmental and Geological Microgravity Applications and Feasibility of Its Employment at Archaeological Sites in Israel

Lev V. Eppelbaum¹

Academic Editor: Jean Dumoulin

Received17 Jan 2011

Accepted17 Apr 2011

Published30 Jun 2011

Abstract

Microgravity investigations are widely applied at present for solving various environmental and geological problems. Unfortunately, microgravity survey is comparatively rarely used for searching for hidden ancient targets. It is caused mainly by small geometric size of the desired archaeological objects and various types of noise complicating the observed useful signal. At the same time, development of modern generation of field gravimetric equipment allows to register promptly and digitally microGal (10⁻⁸ m/s²) anomalies that offer a new challenge in this direction. An advanced methodology of gravity anomalies analysis and modern 3D modeling, intended for ancient targets delineation, is briefly presented. It is supposed to apply in archaeological microgravity the developed original methods for the surrounding terrain relief computing. Calculating second and third derivatives of gravity potential are useful for revealing some closed peculiarities of the different Physical-Archaeological Models (PAMs). It is underlined that physical measurement of vertical gravity derivatives in archaeological studying has a significant importance and cannot be replaced by any transformation methods. Archaeological targets in Israel have been ranged by their density/geometrical characteristics in several groups. The performed model computations indicate that microgravity investigations might be successfully applied at least in 20–25% of archaeological sites in Israel.

1. Introduction

Development of a new modern gravimetric and variometric (gradientometric) equipment (permitting registering earlier inaccessible small anomalies and improving the observation methodology) and creation of new methodologies for gravity data processing and interpretation have triggered an arising of microgravity methodology application in environmental and economic minerals geophysics.

Microgravity is recognized now as a effective tool for analysis of various geological inhomogeneities in subsurface, monitoring of volcanic activity, and prospecting of useful minerals (e.g., [1–30]). Butler [6, 7] carried out a careful investigation of the gravity and gravity-gradient determination concepts and corresponding interpretative procedures of microgravity. The types of noise (disturbances) arising in the microgravity investigations are studied in detail in Debeglia and Dupont [31]. Styles et al. [17] discussed a few actual problems suggested to removing of noise components arising in microgravity under complicated environments.

2. A Brief Review of Employment of Archaeological Sites: A World Experience

Obviously, the history of gravity (microgravity) application at archaeological sites is beginning from the work of Linnington [32]. The Linnington’s attempt to examine the Etruscan chambered tombs at Cerveteri (Italy) was not very successful, but next microgravity applications in archaeology have shown the prospectiveness of this method.

Fajklewicz [3] investigation was suggested to examination of the gravity vertical gradient (W_zz) over underground galleries. Apparently, he was first indicating the significant difference between the physically measured W_zz and this value obtained by the way of any transformation. Interesting examples of microgravity anomalies examination from some archaeological targets are presented in Blížkovský [4].

Kerisel [33] has been used microgravity method for estimation of the Cheops pyramid (Egypt) weight and peculiarities of it structure. Lakshmanan [34] microgravity investigations inside, above, and around the Cheops pyramid led to an evaluation of the structure’s overall density and of density changes in the structure.

Slepak [35] obtained gravity anomalies of 30–80 microGals reflecting the remains of ancient buildings in the territory of Kazan Kremlin (Russia). A careful examination of microgravity anomaly at the Boden Vean (Cornwall, UK) allowed to suggesting existence of new archaeological remains [36].

Pasteka and Zahorec [37] examined a complex microgravity anomaly in the area of a former church of St. Catherine (Dechtice, Slovakia) by the use of stripping technology. Microgravity anomalies of 15–20 microGals were registered over the remains of the Late Byzantine church walls in Umm er-Rasad (Jordan) [38].

A small number of microgravity measurements were performed in the Bedem archaeological locality in Yugoslavia [39]. Abad et al. [23] have carried out an assessment of a buried rainwater cistern in the Carthusian Monastery (Valensia, Spain) on the basis of 2D microgravity modeling. Microgravity survey has been successfully employed at the Roman Amphitheatre of Durres, Albania [40]. Microgravity examination performed by Sarris et al. [41] allowed identifying negative gravity anomalies above the ancient tombs in the Roman Cemetery at Kenchreai (Korinthia), Greece.

Castiello et al. [42] have been delineated underground ancient cavity in the complex urban environment of Naples. Detailed gravity examination has been effectively performed in the Red Square (Moscow) several years ago with the aim to delineate ancient underground galleries (personal communications).

3. Analysis of Microgravity Anomalies

It is known that the trivial formulas of quantitative analysis (based on simple relationships between the gravity field semiamplitude and center of the disturbing body) are widely presented in the geophysical literature (e.g., [43, 44]). However, absence of reliable information about the normal gravity field in the studied areas strongly limits practical application of these methods.

3.1. Some Common Aspects between the Magnetic and Gravity Fields

Gravity field intensity F is expressed as where W is the gravity potential.

For anomalous magnetic field we can write (when magnetic susceptibility ≤0.1 SI unit) [45] where V represents the magnetic potential.

Let us consider analytical expressions of some typical models employed in magnetic and gravity fields (Table 1).

Here is the vertical magnetic field component at vertical magnetization, I is the magnetization, b is the horizontal semithickness of thin bed (TB), m is the elementary magnetic mass, z is the depth to a center of body (for HCC and sphere) and depth to the upper edge of TB and rod (point source), and M is the mass of sphere.

It is clear that expressions (1) and (2) are analogical ones and (*) and (**), (), and (), respectively, are proportional ones.

Taking into account all above mentioned, we can apply for the gravity field analysis the advanced interpreting methodologies developed in magnetic prospecting for complicated environments [45]. For instance, we can interpret anomaly from the gravity HCC by the use of formulas applied in the magnetic TB (see Table 1).

We can also calculate the “gravity moment,” which could be used for classification and ranging gravity anomalies from various types of targets. The “gravity moment” of HCC may be calculated by the use of corresponding formula for the magnetic TB [45]: where is the gravity moment, is the amplitude of gravity anomaly (in mGal), and h is depth of HCC occurrence (in meters).

3.2. Calculation of Inclined Terrain Relief Influence

A significant number of archaeological sites occur under conditions of rugged terrain relief. Uneven observation lines are responsible for variations in the distance from the point of measurements to the source that can strongly complicate quantitative analysis of gravity anomalies [46]. If anomalies are observed on an inclined profile, then the obtained parameters characterize a certain fictitious body. The transition from fictitious body parameters to those of the real body is performed using the following expressions (the subscript “r” stands for a parameter of the real body) [45]: where h is the depth of the upper edge occurrence, is the location of the source’s projection to plan relative to the extremum having the greatest magnitude, and is the angle of the terrain relief inclination ( when the inclination is toward the positive direction of the x-axis).

A simple example of interpreting gravity anomaly from a buried cavity on inclined profile is presented in Figure 1. It should be noted that if the well will be drilled on the projection of gravity anomaly minimum to the earth’s surface could not met this target (due to disturbing effect of inclined relief). Application of the improved tangent’s method (developed in the magnetic prospecting for complex environments [45]) together with (4) permits to obtain the position of the cavity center (bold red point in Figure 1) with the sufficient accuracy. in this example consists of .

3.3. Calculation of Second and Third Derivatives of Gravitational Potential

Second and third derivatives of gravity potential could be very useful for defining some important peculiarities of archaeological targets location in different physical-archaeological models (PAMs). It is well known that gravity field is a function of mass and derivatives of gravity field is a function of density. Taking into account small depth of archaeological targets and their not large geometrical size, observation of both vertical and horizontal derivatives of gravity field undoubtedly will permit to obtain new important information about the desired targets. Obviously, integrated analysis of gravity field and vertical and horizontal derivatives will significantly extend the possibilities of geophysical investigations at archaeological sites. It is necessary to underline that physical measurement of vertical gravity derivatives cannot be replaced by computing of this parameter obtained by any transformation procedures: the values computed from the field , as rule, show decreasing values compared with the obtained from physical measurements (or computation at two levels).

4. The Developed Algorithm for 3D Modeling of Gravity Field

The GSFC (Geological Space Field Calculation) program was developed for solving a direct 3D gravity and magnetic prospecting problem under complex geological conditions [16, 45]. This program has been designed for computing the field of Δg (Bouguer, free-air, or observed value anomalies), ΔZ, ΔX, ΔY, ΔT, as well as second derivatives of the gravitational potential under conditions of rugged relief and inclined magnetization. The geological space can be approximated by (1) three-dimensional, (2) semi-infinite bodies and (3) those infinite along the strike closed, left-hand non-closed, right-hand non-closed and open (Figure 2). Geological bodies, are approximated by horizontal polygonal prisms (Figure 3).

The program has the following main advantages (besides abovementioned ones): (1) simultaneous computing of gravity and magnetic fields; (2) description of the terrain relief by irregularly placed characteristic points; (3) computation of the effect of the earth-air boundary by the method of selection directly in the process of interpretation; (4) modeling of the selected profiles flowing over rugged relief or at various arbitrary levels (using characteristic points); (5) simultaneous modeling of several profiles; (6) description of a large number of geological bodies and fragments. The basic algorithm realized in the GSFC program is the solution of the direct 3D problem of gravity and magnetic prospecting for horizontal polygonal prism limited in the strike direction (Figure 3). In the developed algorithm integration over a volume is realized on the surface limiting the anomalous body.

Analytical expression for the first vertical derivative of gravity potential of (m-1) angle horizontal prism (Figure 3) has been obtained by integrating a common analytical expression: where , S is the area of normal section of the prism by the plane of xOz where is the gravitational constant, σ is the density of the body, and is the angle of the prism’s side inclination.

Detailed description of analytical expressions for the first and second derivatives of gravity potential of the approximation model of the horizontal polygonal prism and their connection with magnetic field is presented in Khesin et al. [45].

5. Terrain Correction Applied for Nonconventional Approaches

It is well known that accuracy of microgravity investigations substantially depend on the accuracy of terrain correction (TC) computing. Two approaches presented below were applied for exact TC calculation for the detailed Bouguer gravity observed at ore deposits occurring in the Lesser and Greater Caucasus.

5.1. First Approach

A first method was applied in the Kyzylbulakh gold-pyrite deposit situated in the Mekhmana ore region of the Nagorny Karabakh (Lesser Caucasus) under condition of rugged relief. This deposit is well investigated by mining and drilling operations and therefore was used as a reference field polygon for testing this approach. A special scheme for obtaining the Bouguer anomalies has been employed to suppress the terrain relief effects dampening the anomaly effects from the objects of prospecting. The scheme is based on calculating the difference between the free-air anomaly and the gravity field determined from a 3D model of a uniform medium with a real topography. 3D terrain relief model with an interval of its description of 80 km (the investigated 6 profiles of 800 m length are in the center of this interval) was employed to compute (by the use of GSFC software) the gravitational effect of the medium (σ = 2670 kg/m³). With applying such a scheme the Bouguer anomalies were obtained with accuracy in two times higher than that of TC received by the conventional methods. As a result, on the basis of the improved Bouguer gravity with the precise TC data, the geological structure of the deposit was defined [9].

5.2. Second Approach

Second approach was employed at the complex Katekh pyrite-polymetallic deposit, which is located at the southern slope of the Greater Caucasus (northern Azerbaijan). The main peculiarities of this area are very rugged topography of SW-NE trend, complex geology and severe tectonics. Despite the availability of conventional (TC far zones were computed up to 200 km), for the enhanced calculation of surrounding terrain topography, a digital terrain relief model was created [16]. The SW-NE regional topography trend in the area of the Katekh deposit occurrence was computed as a rectangular digital terrain relief model (DTRM) of 20 km long and 600 m wide (our interpretation profile with a length of 800 m was located in the geometrical center of the DTRM). As a whole, about 1000 characteristic points were used to describe the DTRM (most frequently points were focused in the center of the DTRM and more rarely—on the margins). Thus, in the interactive 3D modeling (by the use of GSFC software) was computed effect not only from geological bodies occurring in this area, but also from surrounding DTRM. In the issue of this scheme application, two new ore bodies were discovered [16].

6. Feasibility of Microgravity Application on archaeological Sites in Israel

Analysis of the numerous archaeological and geological publications as well as the author’s investigation (e.g., [29, 47]) indicates that the ancient objects supposed for examination by the use of microgravity survey may be classified (in the order of decreasing) by the following way: (1)underground ancient cavities and galleries, (2)walls, remains of temples, churches, and various massive constructions, (3)pavements and tombs,(4)roman aqueducts (under favorable physical-geological environments),(5)areas of ancient primitive metallurgical activity, including furnaces, (under favorable physical-geological environments).

Examining the different archaeological targets in Israel, it was supposed that microgravity method might be effectively applied at least on 20–25% of ancient sites [29, 47].

A simplified model example of buried pavement delineation is presented in Figure 4. A buried pavement having the positive density contrast of 400 kg/m³and occurring at a depth of 1.8 m in uniform medium (PAM of one of the Megiddo sites was selected as a basis) could be easily recognized by a microgravity survey (Figure 4(a), anomalous effect from two bodies). Let us assume a low-density layer (2100 kg/m³) over the pavement. It makes the delineation of the pavement practically impossible in field conditions (registered anomaly is oscillating about 1 microGal) (Figure 4(a), anomalous effect from three bodies). At the same time values of the second vertical derivative of gravity potential (computed for the levels of 0.3 and 1.5 m) with a measurable accuracy testify to a presence of disturbing body (Figure 4(b)). The similar graphs were developed for the models of buried ancient caves of various radius, ancient iron furnaces, Roman aqueducts, and so forth.

(a)

(b)

(c)

Calculations of and might be also useful for delineation of anomalies from closely disposed objects and removing of regional background, respectively. Taking into account that many archaeological sites in Israel are located in the vicinity of natural (sea and lake basins, mountains, water channels, forests, etc.) and industrial (plants, buried pipelines, tunnels, railways, etc.) disturbing objects, this fact might have an essential significance. For instance, Figure 5 shows that computing of () makes it possible to recognize reliably gravity effects from two closely located underground caves. Ancient Prehistoric caves corresponding to this PAM are investigated in several archaeological sites disposed closely to the Golan Heights.

(a)

(b)

(c)

(d)

The planning microgravity investigations must be accompanied by development of preliminary physical archaeological models (PAM) [47, 48]. The PAM presented in Figure 6 reflects a real archaeological site located in the vicinity of Beit-Shemesh town (central Israel). The developed PAM was used for the estimation of expected gravity anomalies amplitudes, calculation of the most optimal step of observations along profiles, and distances between profiles.

7. Conclusions

Archaeological remains in the Israeli territory are classified by the degree of microgravity method applicability. The described characteristics of the developed software for combined 3D gravity-magnetic modeling under complicated environments indicate that it is a powerful tool for microgravity examination at archaeological sites. Two earlier applied nonconventional schemes for computing of surrounding terrain relief in ore deposits may be successfully adopted for obtaining in archaeological sites situated in the mountainous (submountainous) regions of Israel. A proposed scheme of gravity anomalies quantitative interpretation is briefly discussed and explained on a model example. It is shown the necessity of gravity field derivatives employment in some specific situations. The developed PAM of the typical prehistoric cave (central Israel) testifies to the usefulness of such models utilization.

Acknowledgments

The author would like to thank two anonymous reviewers, who thoroughly reviewed the paper, and their critical comments were helpful in preparing this paper. The author thank the U.S. Agency for International Development and the European Community’s FP7 Program under Grant Agreement no. 225663 Joint Call FP7-ICT-SEC-2007-1 for supporting this investigation.

References

G. C. Colley, “The detection of caves by gravity measurements,” Geophysical Prospecting, vol. 11, no. 1, pp. 1–9, 1963.
View at: Google Scholar
A. A. Arzi, “Microgravimetry for engineering applications,” Geophysical Prospecting, vol. 23, no. 3, pp. 408–425, 1975.
View at: Google Scholar
Z. J. Fajklewicz, “Gravity vertical gradient measurements for the detection of small geologic and anthropogenic forms,” Geophysics, vol. 41, no. 5, pp. 1016–1030, 1976.
View at: Google Scholar
M. Blížkovský, “Processing and applications in micro gravity surveys,” Geophysical Prospecting, vol. 27, no. 4, pp. 848–861, 1979.
View at: Google Scholar
M. Bichara, J. C. Erling, and J. Lakshmanan, “Technique de mesure et d'interpretation minimisant les erreurs de mesures en microgravimetrie,” Geophysical Prospecting, vol. 29, no. 5, pp. 782–789, 1981.
View at: Google Scholar
D. K. Butler, “Interval gravity-gradient determination concepts,” Geophysics, vol. 49, no. 6, pp. 828–832, 1984.
View at: Google Scholar
D. K. Butler, “Microgravimetric and gravity-gradient techniques for detection of subsurface cavities,” Geophysics, vol. 49, no. 7, pp. 1084–1096, 1984.
View at: Google Scholar
J. F. Thimus and M. van Ruymbeke, “Improvements in field technique for use of the Lacoste and Romberg gravimeter in microgravity surveys,” First Break, vol. 6, no. 4, pp. 109–112, 1988.
View at: Google Scholar
B. E. Khesin, V. V. Alexeyev, and L. V. Eppelbaum, “Investigation of geophysical fields in pyrite deposits under mountainous conditions,” Journal of Applied Geophysics, vol. 31, pp. 187–205, 1993.
View at: Google Scholar
D. Patterson, J. C. Davey, A. H. Cooper, and J. K. Ferris, “The application of microgravity geophysics in a phased investigation of dissolution subsidence at Ripon, Yorkshire,” Quarterly Journal of Engineering Geology and Hydrogeology, vol. 28, pp. 83–94, 1995.
View at: Google Scholar
D. E. Yule, M. K. Sharp, and D. K. Butler, “Microgravity investigations of foundation conditions,” Geophysics, vol. 63, no. 1, pp. 95–103, 1998.
View at: Google Scholar
M. Beres, M. Luetscher, and R. Olivier, “Integration of ground-penetrating radar and microgravimetric methods to map shallow caves,” Journal of Applied Geophysics, vol. 46, no. 4, pp. 249–262, 2001.
View at: Publisher Site | Google Scholar
D. K. Butler, “Potential fields methods for location of unexploded ordnance,” The Leading Edge, vol. 20, no. 8, pp. 890–895, 2001.
View at: Google Scholar
M. Rybakov, V. Goldshmidt, L. Fleischer, and Y. Rotstein, “Cave detection and 4-D monitoring: a microgravity case history near the Dead Sea,” The Leading Edge, vol. 20, no. 8, pp. 896–900, 2001.
View at: Google Scholar
T. Hunt, M. Sugihara, T. Sato, and T. Takemura, “Measurement and use of the vertical gravity gradient in correcting repeat microgravity measurements for the effects of ground subsidence in geothermal systems,” Geothermics, vol. 31, no. 5, pp. 525–543, 2002.
View at: Publisher Site | Google Scholar
L. V. Eppelbaum and B. E. Khesin, “Advanced 3-D modelling of gravity field unmasks reserves of a pyrite-polymetallic deposit: a case study from the Greater Caucasus,” First Break, vol. 22, no. 11, pp. 53–56, 2004.
View at: Google Scholar
P. Styles, S. Toon, E. Thomas, and M. Skittrall, “Microgravity as a tool for the detection, characterization and prediction of geohazard posed by abandoned mining cavities,” First Break, vol. 24, no. 5, pp. 51–60, 2006.
View at: Google Scholar
D. K. Butler, Near-Surface Geophysics (Investigations in Geophysics, No. 13), Society of Exploration Geophysicists, 2005.
J. S. da Silva Jr. and F. J. F. Ferreira, “Gravimetry applied to water resources and risk management in karst areas: a case study in Parana state, Brazil,” in Proceedings of the 23rd FIG Congress, Munich, Germany, 2006.
View at: Google Scholar
M. W. Branston and P. Styles, “Site characterization and assessment using the microgravity technique: a case history,” Near Surface Geophysics, vol. 4, no. 6, pp. 377–385, 2006.
View at: Google Scholar
N. Debeglia, A. Bitri, and P. Thierry, “Karst investigations using microgravity and MASW: application to Orleans, France,” Near Surface Geophysics, vol. 4, pp. 215–225, 2006.
View at: Google Scholar
M. Ezersky, I. Bruner, S. Keydar, P. Trachtman, and M. Rybakov, “Integrated study of the sinkhole development site on the Western shores of the Dead Sea using geophysical methods,” Near Surface Geophysics, vol. 4, no. 5, pp. 335–343, 2006.
View at: Google Scholar
I. R. Abad, F. G. García, I. R. Abad et al., “Non-destructive assessment of a buried rainwater cistern at the Carthusian Monastery 'Vall de Crist' (Spain, 14th century) derived by microgravimetric 2D modelling,” Journal of Cultural Heritage, vol. 8, no. 2, pp. 197–201, 2007.
View at: Publisher Site | Google Scholar
C. C. Bradley, M. Y. Ali, I. Shawky, A. Levannier, and M. A. Dawoud, “Microgravity investigation of an aquifer storage and recovery site in Abu Dhabi,” First Break, vol. 25, no. 11, pp. 63–69, 2007.
View at: Google Scholar
L. V. Eppelbaum, “Revealing of subterranean karst using modern analysis of potential and quasi-potential fields,” in Proceedings of the 2007 SAGEEP Conference, vol. 20, pp. 797–810, Denver, Colo, USA, 2007.
View at: Google Scholar
T. Mochales, A. M. Casas, E. L. Pueyo et al., “Detection of underground cavities by combining gravity, magnetic and ground penetrating radar surveys: a case study from the Zaragoza area, NE Spain,” Environmental Geology, vol. 53, pp. 1067–1077, 2007.
View at: Google Scholar
L. V. Eppelbaum, M. Ezersky, A. Al-Zoubi, V. Goldshmidt, and A. Legchenko, “Study of the factors affecting the karst volume assessment in the Dead Sea sinkhole problem using microgravity field analysis and 3D modeling,” Advances in Geosciences, vol. 19, pp. 97–115, 2008.
View at: Google Scholar
S. Deroussi, M. Diament, J. B. Feret, T. Nebut, and T. Staudacher, “Localization of cavities in a thick lava flow by microgravimetry,” Journal of Volcanology and Geothermal Research, vol. 184, no. 1–2, pp. 193–198, 2009.
View at: Publisher Site | Google Scholar
L. V. Eppelbaum, “Application of microgravity at archaeological sites in Israel: some estimation derived from 3D modeling and quantitative analysis of gravity field,” in Proceedings of the 2009 SAGEEP Conference, vol. 22, no. 1, pp. 434–446, Texas, USA, 2009.
View at: Google Scholar
F. Greco, G. Currenti, C. Del Negro et al., “Spatiotemporal gravity variations to look deep into the southern flank of Etna volcano,” Journal of Geophysical Research, vol. 115, Article ID B11411, 2010.
View at: Publisher Site | Google Scholar
N. Debeglia and F. Dupont, “Some critical factors for engineering and environmental microgravity investigations,” Journal of Applied Geophysics, vol. 50, no. 4, pp. 435–454, 2002.
View at: Publisher Site | Google Scholar
R. E. Linnington, “The test use of a gravimeter on Etruscan chambered tombs at Cerveteri,” Prospezioni Archaeology, vol. 1, pp. 37–41, 1966.
View at: Google Scholar
J. Kerisel, “Le Dossier scientifique sur la pyramide de Kheops,” Archeologia, vol. 232, pp. 46–54, 1988.
View at: Google Scholar
J. Lakshmanan, “The generalized gravity anomaly: endoscopic microgravity,” Geophysics, vol. 56, no. 5, pp. 712–723, 1991.
View at: Google Scholar
Z. Slepak, “Electromagnetic sounding and high precision gravimeter survey define ancient stone building remains in the territory of Kazan Kremlin (Kazan, Republic of Tatarstan, Russia),” Archaeological Prospection, vol. 6, pp. 1147–160, 1999.
View at: Google Scholar
N. T. Linford, “Geophysical survey at Boden Vean, Cornwall, including an assessment of the microgravity technique for the location of suspected archaeological void features,” Archaeometry, vol. 40, no. 1, pp. 187–216, 1998.
View at: Google Scholar
R. Pašteka and P. Zahorec, “Interpretation of microgravimetrical anomalies in the region of the former church of St. Catherine, Dechtice,” Contributions to Geophysics and Geodesy, vol. 30, no. 4, pp. 373–387, 2000.
View at: Google Scholar
A. Batayneh, J. Khataibeh, H. Alrshdan, U. Tobasi, and N. Al-Jahed, “The use of microgravity, magnetometry and resistivity surveys for the characterization and preservation of an archaeological site at Ummer-Rasas, Jordan,” Archaeological Prospection, vol. 14, no. 1, pp. 60–70, 2007.
View at: Publisher Site | Google Scholar
S. Komatina and Z. Timotijevic, “Some case studies of geophysical exploration of archaeological sites in Yugoslavia,” Journal of Applied Geophysics, vol. 41, no. 2–3, pp. 205–213, 1999.
View at: Publisher Site | Google Scholar
M. Di Filippo, S. Santoro, and B. Toro, “Microgravity survey of Roman Amphitheatre of Durres (Albania),” in Proceedings of the 6th Archaeological Prospection, Rome, Italy, 2005.
View at: Google Scholar
A. Sarris, R. K. Dunn, J. L. Rife, N. Papadopoulos, E. Kokkinou, and C. Mundigler, “Geological and geophysical investigations in the Roman Cemetery at Kenchreai (Korinthia), Greece,” Archaeological Prospection, vol. 14, no. 1, pp. 1–23, 2007.
View at: Publisher Site | Google Scholar
G. Castiello, G. Florio, M. Grimaldi, and M. Fedi, “Enhanced methods for interpreting microgravity anomalies in urban areas,” First Break, vol. 28, no. 8, pp. 93–98, 2010.
View at: Google Scholar
W. M. Telford, L. P. Geldart, and R. E. Sheriff, Applied Geophysics, Cambridge University Press, 1993.
D. S. Parasnis, Principles of Applied Geophysics, Prentice and Hall, 1997.
B. E. Khesin, V. V. Alexeyev, and L. V. Eppelbaum, Interpretation of Geophysical Fields in Complicated Environments, Advanced Approaches in Geophysics, Kluwer Academic Publisher, Dordrecht, The Netherlands, 1996.
V. V. Alexeyev, B. E. Khesin, and L. V. Eppelbaum, “Geophysical fields observed at different heights: a common interpretation technique,” in Proceedings of the Meeting of Society of Exploration Geophys., pp. 104–108, Jakarta, 1996.
View at: Google Scholar
L. V. Eppelbaum, “Archaeological geophysics in Israel: past, present and future,” Advances in Geosciences, vol. 24, pp. 45–68, 2010.
View at: Google Scholar
L. V. Eppelbaum, “Applicability of geophysical methods for localization of archaeological targets: an introduction,” Geoinformatics, vol. 11, no. 1, pp. 19–28, 2000.
View at: Google Scholar

Copyright

Copyright © 2011 Lev V. Eppelbaum. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

2727

Downloads

2022

Citations