Research Article
Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates
Table 3
(a) Response table for average S/N ratio for S1. (b) Response table for average S/N ratio for S2. (c) Response table for average S/N ratio for S3.
(a) |
| Factor | Level (S/N) | Max–Min | Rank | 1 | 2 | 3 |
| A | 1.23003 | | | 2.33155 | 2 | B | 3.52697 | | | 4.38964 | 1 | C | 0.83614 | | | 2.13547 | 3 |
|
|
(b) |
| Factor | Level (S/N) | Max–Min | Rank | 1 | 2 | 3 |
| A | 0.64878 | | | 2.88357 | 2 | B | 3.03928 | | | 4.00254 | 1 | C | 0.02445 | | | 2.68379 | 3 |
|
|
(c) |
| Factor | Level (S/N) | Max–Min | Rank | 1 | 2 | 3 |
| A | 0.70845 | | | 2.44550 | 2 | B | 2.82741 | | | 3.28083 | 1 | C | 0.64256 | | | 1.09599 | 3 |
|
|