Experimental Investigation of the Corrosion Behavior of Friction Stir Welded AZ61A Magnesium Alloy Welds under Salt Spray Corrosion Test and Galvanic Corrosion Test Using Response Surface Methodology

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="7"><hr/></td></tr><tr class="thead"><td align="left">Rotational speed (rpm)</td><td align="center">Welding speed (mm/min)</td><td align="center">Axial force (kN)</td><td align="center">Tool shoulder diameter (mm)</td><td align="center">Pin diameter (mm)</td><td align="center">Pin length (mm)</td><td align="center">Pin profile</td></tr><tr><td class="thead-hr" colspan="7"><hr/></td></tr><tr><td align="left">1000</td><td align="center">75</td><td align="center">3</td><td align="center">18</td><td align="center">6</td><td align="center">5</td><td align="center">Left hand thread of 1 mm pitch</td></tr><tr class="table-tr"><td colspan="7"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

Optimized welding conditions and process parameters used to fabricate the joints.

International Journal of Metals

tab2

Table 2

Table 2: Experimental Investigation of the Corrosion Behavior of Friction Stir Welded AZ61A Magnesium Alloy Welds under Salt Spray Corrosion Test and Galvanic Corrosion Test Using Response Surface Methodology 

Table 2 | Experimental Investigation of the Corrosion Behavior of Friction Stir Welded AZ61A Magnesium Alloy Welds under Salt Spray Corrosion Test and Galvanic Corrosion Test Using Response Surface Methodology 