About this Journal Submit a Manuscript Table of Contents
International Journal of Photoenergy
Volume 2012 (2012), Article ID 670981, 7 pages
http://dx.doi.org/10.1155/2012/670981
Research Article

High-Efficiency Si Solar Cell Fabricated by Ion Implantation and Inline Backside Rounding Process

1Institute of Microelectronics and Department of Electrical Engineering, Center for Micro/Nano Science and Technology, Advanced Optoelectronic Technology Center, National Cheng Kung University, Tainan 70101, Taiwan
2Inventec Solar Energy Coporation, Taoyuan 335, Taiwan

Received 11 July 2012; Revised 13 November 2012; Accepted 17 November 2012

Academic Editor: Man Shing Wong

Copyright © 2012 Chien-Ming Lee et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Chien-Ming Lee, Sheng-Po Chang, Shoou-Jinn Chang, and Ching-In Wu, “High-Efficiency Si Solar Cell Fabricated by Ion Implantation and Inline Backside Rounding Process,” International Journal of Photoenergy, vol. 2012, Article ID 670981, 7 pages, 2012. doi:10.1155/2012/670981