About this Journal Submit a Manuscript Table of Contents

Materials, Designs, Fabrications, and Applications of Organic Electronic Devices

Call for Papers

Organic electronics is a promising technology that is presently being introduced in an extensive range of applications. Organic electronics has been the subject of latest attention for energy saving and other innovative technologies, including organic light emitting diodes (OLEDs), polymer light-emitting diodes (PLEDs), organic light emitting transistors (OLETs), organic field-effect transistors (OFETs), organic memories, organic batteries, organic lasers, organic thin film transistors (OTFTs), and organic photo voltaic (OPV). They can also be used to make optoelectronic devices lightweight, energy-saving, flexible, large area size, low cost, and printable.

We are cordially inviting authors to contribute their original research articles as well as review articles that will stimulate the continuing efforts of design, synthesis, fabrication, characterization, and applications of numerous organic electronic devices for energy saving and environmental friendly main stream and future technologies. Potential topics include, but are not limited to:

  • Organic electronic and optoelectronic materials, devices, and applications
  • New materials and device technologies for long lifetime OLEDs
  • Numerous device architectural approaches for high efficiency OLEDs
  • Materials, device technologies, and emerging applications of PLEDs
  • Printed organic electronic technologies and its potential applications
  • Recent advances in optoelectronic technologies
  • Materials, devices, and technologies for OLETs and OFETs
  • Advancement in OTFTs using emerging organic materials
  • Organic photovoltaic devices, materials, and technologies
  • Novel approaches for energy-efficient and long life organic batteries

Before submission authors should carefully read over the journal’s Author Guidelines, which are located at http://www.hindawi.com/journals/ijp/guidelines/. Prospective authors should submit an electronic copy of their complete manuscript through the journal Manuscript Tracking System at http://mts.hindawi.com/submit/journals/ijp/oed/ according to the following timetable:

Manuscript DueFriday, 14 February 2014
First Round of ReviewsFriday, 9 May 2014
Publication DateFriday, 4 July 2014

Lead Guest Editor

  • Jwo-Huei Jou, Department of Material Science and Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan

Guest Editors

  • Ramunas Lygaitis, Department of Organic Technology, Kaunas University of Technology, Radvilenu Road 19, LT-50254 Kaunas, Lithuania
  • K. R. Justin Thomas, Department of Chemistry, Indian Institute of Technology, Roorkee 247667, India
  • Liang-Sheng Liao, Institute of Functional Nano and Soft Materials, Soochow University, Suzhou 215123, China