Three-Phase Characterization of Uniaxially Stretched Linear Low-Density Polyethylene

Table 1

The melt draw ratio (MDR) and cold-draw ratio (CDR) of the obtained monofilaments. The total draw ratio (TDR) is calculated by multiplying MDR with CDR.

Production	MDR	CDR	TDR
A-3	3,5	7,2	25,2
A-4	4,1	6,2	25,4
A-5	4,5	5,7	25,7
A-6	5,0	5,0	25,0
A-7	5,7	4,5	25,7
A-8	6,0	4,2	25,2
A-9	6,8	3,7	25,2